This is a highly regarded Balanced Design Preamplifier from Bel Canto MSRP $2000. The unit comes with a remote control and the latest r1.01 control software from Bel Canto. The unit is in excellent physical condition as pictured and is in perfect working order. • All analog, low noise, low distortion architecture for controlling up to six (6) 2-channel inputs including 1 balanced input • Fully balanced XLR outputs for optimum interface to the power amplifier • 4-layer PC board design for superior signal routing, grounding and power supply routing • Latest generation of low-noise, low-distortion high speed audio buffers, level controls and output drivers provide superb measured and subjective audio quality • Independent digital and analog transformers and multi-stage power supplies for precise power to the sensitive analog circuitry • Precision audio grade resistors and no capacitors in the audio signal path • Ultra low noise second stage regulation for the analog amplifier sections • Home Theater Bypass mode on Input 5 • Digitally controlled analog volume control for optimum signal architecture • New Single-Knob user interface provides simple, intuitive control function

2 stereo amplifiers in the listing. One has been significantly upgraded by the factory Monoblock takes the power up to 400w in 8 ohms

Everything functions perfectly. This is one of the best pres I’ve ever owned. Cosmetically almost perfect. Can’t really name any blemishes but I’d just say 9.5/10. Comes with original box, packing materials, manuals and remote. Included are a pair of Amperex 6jd8 tubes. Note that there is no phono input, line only. Only thing I do not have is the original IEC power cable. I can include a random one if you ask before purchase. Will ship with great care. Thanks!

Classic audiophile preamp from Bel Canto Design. This unit was recently inspected and serviced by Matt Cramer of Ace Tomato Audio, the Bel Canto Design factory-authorized service center, who gave it a full bill of health: I started by running some frequency tests and all looks good. Basically the unit measure perfectly flat. ... You’ve got a late Rev B unit thats a perfect candidate for upgrades. Im happy to share the upgrade options Matt suggested. There is a small blemish at the rear of the top of the unit, so I cant call it mint, but it is in excellent condition. A manual and power cable are included, as is an aftermarket preprogrammed remote. (Other remote options ranging from original to aftermarket, and from $800 to $300, are available from Ace Tomato.) Im also throwing in two WBC XLR cables (Canare Cable, Neutrik connector) to take advantage of the units balanced connections. The Pre1 comes double boxed in factory packaging. Specifications Volume setting for unity gain • 84 Input overload • 5 Volts rms Bandwidth Into >600 Ohms • 0 Hz-200 kHz Signal to Noise Ratio re 1 volt out • >100 dB A weighted, 20-20KHz Distortion at 1 Volts rms Out • <0.01% Input configuration and impedance • Single-ended/balanced 20K ohm Output Options • 2-XLR Balanced; 2-RCA; 1-buffered RCA Tape Out Output Impedance • 50 ohms Maximum Output Level • 10 volts rms Balanced Gain Single-ended • 16 dB Gain Balanced • 16 dB Power Requirements • 100-120 VAC 50-60 Hz or 230-240 VAC 50-60 Hz 25VA Size • 17.5”W x 15”D x 4”H (mm x mm x mm) Weight • 14lbs. (6.5kg) The Pre1 output stage uses the latest integrated technology to combine multiple amplifiers and Laser trimmed precision resistors in a true balanced output stage. This balanced stage mimics the operation of a transformer, providing ideal line-level audio drive into either a balanced or single-ended load. This operation eliminates ground loop issues with power amplifiers when used with either the RCA outputs or the XLR. This assures maximum signal to noise and extremely low distortion with the shortest audio signal path. The power supply uses a separate low noise regulation for each channel’s gain stage. Audio grade decoupling capacitors, star grounding and careful signal routing insure that low-level signals are preserved. The volume control is a precision Crystal 3310 potentiometer controlled by a microcontroller. This device provides extremely low noise and distortion coupled with high accuracy. We have found the sonic quality to be as good as or better than the best potentiometers and switched attenuators with a long useful life and no wear The input processing provides two (2) true balanced input connections and three (3) RCA jack connections plus Tape In. The Tape Output is an RCA output with an active audio-grade buffer preamplifier to isolate the internal signal bus from the tape output. The main outputs are a single-ended RCA and a balanced connection for use with balanced cables and power amplifier inputs. The elegant simplicity of the signal path and gain stage allows the Pre1 to preserve the audio signal quality.

The Bel Canto C5i is a very well reviewed, nice sounding, compact and attractive 60 watt integrated amplifier. Only one owner (me). I bought it new in 2011 at Stereo Exchange in NYC. Excellent condition. I do not have the original packaging but it includes the manual, remote, and power cord. Located in near Charlottesville, Virginia if you want to pickup locally. Otherwise Ill box it up and you pay shipping.

About this product:Class-Leading 124dB Dynamic Range, 24-Bit/192kHz USB Input, and Advanced Master Clocks Attest to Performance of the Bel Canto e.One DAC 2.8: U.S.A.-Made DAC Delivers Authoritative SoundNo-nonsense engineering, straight-up superb performance, exceptional low-noise analog circuitry, and cutting-edge flexibility combine in harmonious bliss in the Bel Canto e.One DAC 2.8 DAC/control preamplifier. Belying its conveniently compact form and intentionally minimalist aesthetics, the U.S.A.-made e.One DAC 2.8 dazzles with an array of features that help play music with stunning detail, openness, authority, purity, and dynamics. With e.One DAC 2.8 in your chain, audio becomes as fun as peeling the shrink wrap off a new LP for the first time. Never mind this components 14-pound or 8.5 x 12.5 x 3.5-inch (WDH) dimensions. It delivers like a full-size heavyweight on steroids whether employed in a full stereo setup or computer-audio rig. And it upsamples any incoming data that is less than 24-bit/192kHz to that standard.Featuring Bel Cantos High-Dynamic Resolution Core – a technology comprised of ultra-low-noise master clocks, advanced asynchronous interfaces, and dual-mode high-efficiency power supplies – e.One DAC 2.8 also includes an asynchronous 24-bit/192kHz USB2.0 input that works with the built-in, dual, ultra-low-noise Femtosecond clocks to provide arresting fidelity from your files and streamed music. Bel Canto Virtual Battery Technology isolates the converters from power-line noise and ensures low-impedance power delivery to (and isolation of) the electronics. No wonder e.One DAC 2.8 boasts a class-leading 124dB dynamic range. A 24-bit high-definition volume control, 36-button infrared remote control, and analog input also come standard. Ditto a dedicated high-current headphone output for driving your phones and five asynchronous digital inputs for handy versatility.On the front of the unit, a programmable eight-character display seamlessly works with the dual-functioning one-knob interface to access all basic functions in a few quick clicks. Cool-running operation and a heavy-gauge, resonance-defeating steel chassis round out an all-rounder powerhouse. SKU:UTRA2036218 Warranty: This unit comes with a 30 day Music Direct warranty. Whats Included:Accessories: Manual, Power Cord, Remote, (2x) AAA Batteries, original packing Notes: 9/10 Condition with no signs of damage or abuse. All functions tested successfully, sonically perfect. Specifications:24bit Data at 192KS/s: AES XLR, SPDIF BNC/RCA, TOSLINK, USBMaster Clock noise: 0.07 picoseconds RMSMaximum Output: 4.5Vrms balanced XLR, 2.25Vrms RCAOutput Impedance: 200 ohms balanced XLR, 100 ohms RCAFrequency Response: 20 Hz-20 KHz, +/- 0.5dBTHD+N: <0.001%, 1KHzOutput Noise: 3.3uVrms A-weighted 20Hz-20KHzDynamic Range: 124dB A-weighted 20Hz-20KHzMaximum Input: 2.5 Vrms RCAInput Impedance: 12K ohms RCATHD+N: 0.003%, 2.5Vrms in, 1KHzDynamic Range: 110dB, A-weighted 20Hz-20KHzHeadphone Output: Current and Voltage Level: 4.5Vrms, 300mA THD+N: 0.0015%, 1KHz Output Noise: 3.3uVrms, A-weighted 20Hz-20KHzPower Usage On: 8WPower Usage Off: 0.0WPower Requirement: 100-120VAC, 220-240VAC 50/60 HzDimensions (WDH): 8.5 x 12.5 x 3.5Weight: 14 lbs. Shipping Policy:If you require shipping to Alaska, Hawaii, or Puerto Rico, please contact us first before making an offer.

2 stereo amplifiers in the listing. One has been significantly upgraded by the factory Monoblock takes the power up to 400w in 8 ohms

Classic audiophile preamp from Bel Canto Design. This unit was recently inspected and serviced by Matt Cramer of Ace Tomato Audio, the Bel Canto Design factory-authorized service center, who gave it a full bill of health: I started by running some frequency tests and all looks good. Basically the unit measure perfectly flat. ... You’ve got a late Rev B unit thats a perfect candidate for upgrades. Im happy to share the upgrade options Matt suggested. There is a small blemish at the rear of the top of the unit, so I cant call it mint, but it is in excellent condition. A manual and power cable are included, as is an aftermarket preprogrammed remote. (Other remote options ranging from original to aftermarket, and from $800 to $300, are available from Ace Tomato.) Im also throwing in two WBC XLR cables (Canare Cable, Neutrik connector) to take advantage of the units balanced connections. The Pre1 comes double boxed in factory packaging. Specifications Volume setting for unity gain • 84 Input overload • 5 Volts rms Bandwidth Into >600 Ohms • 0 Hz-200 kHz Signal to Noise Ratio re 1 volt out • >100 dB A weighted, 20-20KHz Distortion at 1 Volts rms Out • <0.01% Input configuration and impedance • Single-ended/balanced 20K ohm Output Options • 2-XLR Balanced; 2-RCA; 1-buffered RCA Tape Out Output Impedance • 50 ohms Maximum Output Level • 10 volts rms Balanced Gain Single-ended • 16 dB Gain Balanced • 16 dB Power Requirements • 100-120 VAC 50-60 Hz or 230-240 VAC 50-60 Hz 25VA Size • 17.5”W x 15”D x 4”H (mm x mm x mm) Weight • 14lbs. (6.5kg) The Pre1 output stage uses the latest integrated technology to combine multiple amplifiers and Laser trimmed precision resistors in a true balanced output stage. This balanced stage mimics the operation of a transformer, providing ideal line-level audio drive into either a balanced or single-ended load. This operation eliminates ground loop issues with power amplifiers when used with either the RCA outputs or the XLR. This assures maximum signal to noise and extremely low distortion with the shortest audio signal path. The power supply uses a separate low noise regulation for each channel’s gain stage. Audio grade decoupling capacitors, star grounding and careful signal routing insure that low-level signals are preserved. The volume control is a precision Crystal 3310 potentiometer controlled by a microcontroller. This device provides extremely low noise and distortion coupled with high accuracy. We have found the sonic quality to be as good as or better than the best potentiometers and switched attenuators with a long useful life and no wear The input processing provides two (2) true balanced input connections and three (3) RCA jack connections plus Tape In. The Tape Output is an RCA output with an active audio-grade buffer preamplifier to isolate the internal signal bus from the tape output. The main outputs are a single-ended RCA and a balanced connection for use with balanced cables and power amplifier inputs. The elegant simplicity of the signal path and gain stage allows the Pre1 to preserve the audio signal quality.

Selling my robust, high power, Bel Canto mono block amp I had used to drive my B&W center channel . Unit is in excellent esthetic and operating condition. Selling because I had installed a big Marantz AMP10 and no longer need this one. All original power cord, factory boxing, and packaging used to ship.Description: Solid-statemonoblock power amplifier with class-D output stage. Input: single-ended RCA orbalanced XLR. Output: one set WBT 5-way safety binding posts. Power Output:>500W into 8 ohms (27.8dBW), >1000W into 4 ohms (27.8dBW). Minimum Load:2 ohms. Voltage gain: 27dB (single ended or balanced input). Peak OutputCurrent: 45A. Frequency Response: 20Hz–20kHz, ±0.5dB all loads. THD+N: 0.007%1W, 1KHz, 4 ohms. IMD (CCIF): 0.0007%, 1W, 14:15KHz, 4 ohms. Output noise: 90µVRMS A-weighted, 10Hz–20kHz. Damping factor: >1000. Output Impedance at100Hz: <8 milliohms. Input impedance: 100k ohms (RCA), 200k ohms (XLR).Input Voltage for Max Output: 3V RMS.The front panels single LED indicates whenthe amp is powered on. Bel Canto uses Bang & Olufsens 1000ASP ICEpowermodules, but with improvements in mechanical damping, parts selection, andfiltering of the residual switching noise present at the amplifiers output. Dimensions: 8.5(216mm) W by 3.5 (88mm) H by 12 (305mm) D. Weight: 18.5 lbs (9kg). Serial number of unit for sale : RI-717

The Bel Canto C5i is a very well reviewed, nice sounding, compact and attractive 60 watt integrated amplifier. Only one owner (me). I bought it new in 2011 at Stereo Exchange in NYC. Excellent condition. I do not have the original packaging but it includes the manual, remote, and power cord. Located in near Charlottesville, Virginia if you want to pickup locally. Otherwise Ill box it up and you pay shipping.

I sell my Bel Vanto DAC 3 in a very good condition. It can be used as a preamplifier, too. I use to have it connected to my Wadia a315 amplifier. Everything works properly. You receive: - Bel Canto DAC 3 - Power cable The unit will be very good packed. For buyers outside EU, please ask me about shipping costs before the purchase. Private sell. No guarantees and return.

The Bel Canto C5i is a very well reviewed, nice sounding, compact and attractive 60 watt integrated amplifier. Only one owner (me). I bought it new in 2011 at Stereo Exchange in NYC. Excellent condition. I do not have the original packaging but it includes the manual, remote, and power cord. Located in near Charlottesville, Virginia if you want to pickup locally. Otherwise Ill box it up and you pay shipping.

I have up for sale an amazing streamer made by Bel Cantos. The only reason I’m selling is I have purchased a new HIFI Rose Rs150B and no longer have a need for 2 streamers. This is in almost perfect condition and the only reason I say almost is nothing is in perfect condition after being used. Look at the pictures to see what I’m talking about. It will ship in its original packaging double box, the way it came from the manufacture it also comes with the original manual. If you have any questions please ask.

The Bel Canto C5i is a very well reviewed, nice sounding, compact and attractive 60 watt integrated amplifier. Only one owner (me). I bought it new in 2011 at Stereo Exchange in NYC. Excellent condition. I do not have the original packaging but it includes the manual, remote, and power cord. Located in near Charlottesville, Virginia if you want to pickup locally. Otherwise Ill box it up and you pay shipping.

22x8cm, massiv, Kenner wissen worum es sich handelt.Sonst sind aber auch Fragen erwünscht! Privatverkauf ohne Gewährleistung und Rückgaberecht.Bitte lesen Sie aufmerksam die Artikelbeschreibung. Auch die Bilder gehören zur Beschreibung.Wenn Sie Fragen haben, stellen Sie diese bitte VOR dem Kauf, damit es nachher keine Diskussionen gibt und beide Parteien Freude am Geschäft haben.

I am selling my very well maintained BelCanto cd 3t drive. It has no scratches and looks like new. It works perfectly. Only the rubber feet are a bit sticky.You receive:- Bel Canto cd3t- Remote control- Power cable- Manual- Proof of purchase from the first owner- Original packaging Please read the instructions first before using the device. For buyers outside the EU, please write to me first to check shipping options. Private sale. No guarantee or return Ich verkaufe meinen sehr gepflegten BelCanto cd 3 t Laufwerk. Es hat keine kratzer und seht wie neu aus. Es funktioniert eiwandfrei. Nur die gummifüse sind etwas klebrig.Sie bekommen:- Bel Canto cd3t- Fernbedienung- Stromkabel- Anleitung- Kaufbeleg von der erster Besitzer- OVP Lesen Sie, bitte zuerst die Anleitung bevor die das Gerät nutzen werden. Für Käufer außerhalb der EU schreiben Sie mir bitte zuerst, um die Versandmöglichkeiten zu prüfen. Privatverkauf. Keine Garantie or Rückgabe

Sparingly Used Demo Unit Digital Section: Maximum Input Data Rate: 24bit Data at 192Ks/s: 24bit Data at 96Ks/s: Master Clock jitter: Analog 24/192 DAC Section: Maximum Output: Output Impedance: Frequency Response: THD+N: Output Noise: Dynamic Range: Analog 24/192 ADC Section: Maximum Input: Input Impedance: Frequency Response: THD+N: Dynamic Range: Headphone Section: Maximum Output: THD+N: Output Noise: General: Power Usage On: Power Usage Off: Internally Set Operating Voltages: Dimensions: Weight: AES 1100hm XLR, SPDIF 750hm, TOSLINK USB 2picosecond RMS 4Vrms balanced XLR, 2Vrms RCA 200 ohms balanced XLR, 100 ohms RCA 20 Hz-20KHz, +/- 0.5dB <0.0015%, 4Vrms balanced out, 1KHz 3.3uVrms, A-weighted 20Hz-20KHz 122dB, A-weighted 20Hz-20KHz 2.5Vrms RCA 12K ohms RCA 20 Hz-20KHz, +/- 0.5dB 0.003%, 2.5Vrms in, 1KHz 110dB, A-weighted 20Hz-20KHz 138mW 0.0055% 35mW, 1KHz 17uVrms, A-weighted 20Hz-20KHz 8W 0.0W 100-120VAC or 230-240VAC 50/60 Hz 8.5 W x 12.5 D x 3.5 H (216 mm x 318 mm x 88 mm) 14lbs. (6.5 kg) Features and specifications are subject to improvements and changes without prior notice.

The Bel Canto C5i is a very well reviewed, nice sounding, compact and attractive 60 watt integrated amplifier. Only one owner (me). I bought it new in 2011 at Stereo Exchange in NYC. Excellent condition. I do not have the original packaging but it includes the manual, remote, and power cord. Located in near Charlottesville, Virginia if you want to pickup locally. Otherwise Ill box it up and you pay shipping.

Sparingly Used Demo Unit Digital Section: Maximum Input Data Rate: 24bit Data at 192Ks/s: 24bit Data at 96Ks/s: Master Clock jitter: Analog 24/192 DAC Section: Maximum Output: Output Impedance: Frequency Response: THD+N: Output Noise: Dynamic Range: Analog 24/192 ADC Section: Maximum Input: Input Impedance: Frequency Response: THD+N: Dynamic Range: Headphone Section: Maximum Output: THD+N: Output Noise: General: Power Usage On: Power Usage Off: Internally Set Operating Voltages: Dimensions: Weight: AES 1100hm XLR, SPDIF 750hm, TOSLINK USB 2picosecond RMS 4Vrms balanced XLR, 2Vrms RCA 200 ohms balanced XLR, 100 ohms RCA 20 Hz-20KHz, +/- 0.5dB <0.0015%, 4Vrms balanced out, 1KHz 3.3uVrms, A-weighted 20Hz-20KHz 122dB, A-weighted 20Hz-20KHz 2.5Vrms RCA 12K ohms RCA 20 Hz-20KHz, +/- 0.5dB 0.003%, 2.5Vrms in, 1KHz 110dB, A-weighted 20Hz-20KHz 138mW 0.0055% 35mW, 1KHz 17uVrms, A-weighted 20Hz-20KHz 8W 0.0W 100-120VAC or 230-240VAC 50/60 Hz 8.5 W x 12.5 D x 3.5 H (216 mm x 318 mm x 88 mm) 14lbs. (6.5 kg) Features and specifications are subject to improvements and changes without prior notice.

Sparingly Used Demo Unit Digital Section: Maximum Input Data Rate: 24bit Data at 192Ks/s: 24bit Data at 96Ks/s: Master Clock jitter: Analog 24/192 DAC Section: Maximum Output: Output Impedance: Frequency Response: THD+N: Output Noise: Dynamic Range: Analog 24/192 ADC Section: Maximum Input: Input Impedance: Frequency Response: THD+N: Dynamic Range: Headphone Section: Maximum Output: THD+N: Output Noise: General: Power Usage On: Power Usage Off: Internally Set Operating Voltages: Dimensions: Weight: AES 1100hm XLR, SPDIF 750hm, TOSLINK USB 2picosecond RMS 4Vrms balanced XLR, 2Vrms RCA 200 ohms balanced XLR, 100 ohms RCA 20 Hz-20KHz, +/- 0.5dB <0.0015%, 4Vrms balanced out, 1KHz 3.3uVrms, A-weighted 20Hz-20KHz 122dB, A-weighted 20Hz-20KHz 2.5Vrms RCA 12K ohms RCA 20 Hz-20KHz, +/- 0.5dB 0.003%, 2.5Vrms in, 1KHz 110dB, A-weighted 20Hz-20KHz 138mW 0.0055% 35mW, 1KHz 17uVrms, A-weighted 20Hz-20KHz 8W 0.0W 100-120VAC or 230-240VAC 50/60 Hz 8.5 W x 12.5 D x 3.5 H (216 mm x 318 mm x 88 mm) 14lbs. (6.5 kg) Features and specifications are subject to improvements and changes without prior notice.

Used sparingly as a demo unit. Features: Maximum Power Output: 500W 4 ohms, 250W 8 ohms per channel Power Output 1% THD: 400W 4 ohms, 200W 8 ohms per channel Minimum Load: 2 ohms per channel Peak Output Current: 35 amperes per channel Frequency Response: +/-3 dB 1.5Hz-70KHz, all loads THD+N: 0.003% 1W, 1KHz, 4 ohms IMD (CCIF): 0.0003%, 1W, 14:15KHz, 4 ohms Output noise: 35uVRMS A-weighted 10Hz-20KHz Voltage gain: 27dB (single ended or balanced input) Damping factor: >1000 Output Impedance at 100Hz: Dynamic Range: 121dB Input Voltage for Max Output: 2Vrms Input connections: Single-ended RCA or balanced XLR RCA input impedance: 100Kohms Balanced input impedance: 200Kohms Output connections: 2-sets WBT Nextgen 5-way binding posts Power On usage: 19W Power Off usage: 0.0W Internally Set Operating Voltages: 100-120VAC or 230-240VAC 50/60 Hz Size: 8.5 x 3.5 x 12[inches], 216 x 88 x 305[mm] (WxHxD) Weight: 15 lbs, 7 Kg

Selling twin power mono blocks from Bel canto. These are the ref1000mk2. Can deliver up to 1000 watts per channel into a 4ohm load so will drive pretty much any speaker on the market with ease. They sound fantastic! They are also shipped with the newer black faceplate rather than the old white. You can read reviews here for version 1: https://6moons.com/audioreviews/eone2/1000.html All packaging is available. They are in great condition! Will be shipped fully insured Hence the cost of the shipping.

Experience high-quality audio with the Bel Canto DAC 1.5. This silver DAC is designed for universal compatibility and is perfect for any home audio setup. With its easy-to-use remote and manual, you can enjoy music with convenience. *Remote control *Original Box *Power supply *Remote control