NEW BOXED BANG & OLUFSEN MMC2 Stylus Cartridge for B&O Beogram 6500 8002 Beocenter 2200 7007 plus these below Inspected, tested and confirmed as new condition - see imagesInterchnagable with any deck that has used an MMC 1 - 5 cartridge. Eg. Beogram RX RX2 TX TX2 1800 2000 3000 3300 3500 4500 5000 5500 5005 6500 7000 8002 9000 9500 and Beocenter 2200 7007 7700MMC means Moving Micro-Cross a superior pick up technology - see belowMMC2 is the SAME spec as MMC1 with the absolute best profile (with the lowest ETM) being labelled as 1s. Get the same spec for hundreds less!ONLY 0.3 milligrammes tracking force that really protects your precious vinylSapphire tubular cantilever and line contact diamond to reduce record wear and maintain optimum surface contact providing extended and more accurate sound reproductionEffective Tip Mass of mg 0,3 B&Os best ever was just 0,25 but if you can find an MMC1 let me know too! - explanation belowBuy with confidence, over 75 new/new other condition MMC cartridge/styli sold in the last 3 years all with 100% feedbackWill fit BeoGram models: RX RX2 TX TX2 1800 2000 2404 3000 3300 3500 4500 5000 5005 5500 6002 6500 7000 8002 8500 9000 9500One MMC2 supplied Photo of all 5 MMC range is for illustration only The tubular construction offered less weight than a solid cantilever but with immense stiffness. The diamond profile was similar to that of the MMC20CL being line contact. The way to look at these cartridges was to imagine an elliptical profile but with both the front and rear facets being scooped out. In this way the vertical contact surface was maximised and the horizontal element kept to a minimum.The MMC1 and MMC2 were essentially the same cartridge with the MMC1 using the best specified diamond tips. The MMC system was carried over from the SP series but taken to an even smaller level.MMC stands for Moving Micro-Cross; the patented moving-iron principle upon which all B&O cartridges were based. This unique system employed a cross-shaped armature which, among other advantages, guaranteed exceptional stereo separation since each channel moves on a separate axis.The job of any pickup cartridge is to transform the records physical profile (groove modulation) into corresponding electrical signals (which are then amplified or enlarged by the amplifier and turned into audible sound waves by the loudspeaker.A cartridge must perform three separate and exacting tasks if it is to do this job successfully. It must function mechanically (the movements of the stylus in the groove); it must function magnetically (using the physical movements to create changes in a magnetic field); and it must function electrically (using the changes in magnetic flux to generate an electrical current). At each stage, one type of energy is transferred into another, quite different, type. And the transfer must be perfect, with no energy lost and none added from extraneous sources.No cartridge will ever reach this ideal unless the Laws of Physics can be repealed. However, by understanding the relationships between the three transfer stages and continually applying refined engineering techniques, B&Os belief was that each stage of cartridge improvement would bring each successive cartridge closer to the ideal.Record wear and the cartridgeIf you take music seriously the value of your record collection is likely to be high. Many of your records are likely to be irreplaceable. You will also know that the signals pressed into your vinyl discs are very fragile indeed. The pickup cartridge can be the discs worse enemy since an ill-suited cartridge can mark a record for life in a single play.While B&O is aware that cartridge specifications are inter-related, their research shows consistently that Effective Tip Mass (ETM) is one of the major factors affecting record wear. ETM is the equivalent of the amount of inertia the groove sees in moving or accelerating the stylus tip. Consequently, the higher the ETM value, the higher the force required for a given constant acceleration. Obviously, more force results in more wear.Three elements contribute to ETM. The stylus tip (diamond) contributes with its entire weight and mass. The armature contributes between 5 - 20% of its weight and mass; the cantilever around 30%. B&O has been able to reduce ETM substantially by refining these elements and building them into an integrated unit. The result is a system which not only reduces damage to the groove walls dramatically, but also provides exceptional performance at all frequencies.MMC2 SpecificationsNude multi-radial Contact Line diamond, mounted on a sapphire cantilever Tracking force - grams 1 Diamond Stylus Cont. line nude Cantilever tube Sapphire Effective tip mass mg 0,3 Compliance mg/mN 30 Frequency 20-20000 Hz=/-dB 1,5 Channel separation 1000>dB 25 Output mV/cm/s RMS 0,6 Cartridge weight gram 1,6 I dont like to disguise the postage and packaging costs in the item price. This shipping price includes, packing materials, insurance and first class tracking that is an unfortunate necessity due to buyer fraud. It is not even the full cost, only the Royal Mail charge. Thank you for your understanding.

BANG OLUFSEN MMC3 Stylus Cartridge B&O Beocenter 2200, 7700, 7007, Beogram 1800.

Original, genuine Bang & Olufsen Beocenter 7700 workshop manual.

BANG & OLUFSEN Master Control Panel MCP 7700 Remote. Working. Slight pixilation in one window.

Bang & Olufsen Beocenter 7700, master control panel 7700 & working B&O MMC3. Designed by Jacob Jensen in 1982, the Beocenter 7700 was the dawn of the Beolink® system. Years ahead of its time, you could control your stereo and speakers from all around the house. This listing comprises of the Beocenter 7700, the 7700 Master Control Panel and an original, working MMC3 nudeline elliptical diamond cartridge. The Beocenter is in working order although Ive been unable to properly test the tape deck. The radio works, but a new aerial is required in order for it to tune to stations effectively. The main event, the turntable works perfectly as does the light in the hood above the platter. The LCD display also functions and can be controlled by the Master Control Panel, which works aside from the LCD displays. As with most units of this age, it has its quirks. The panel above the tape/radio deck doesnt stand up on its own and a previous owner has made some attempts to fix that without success. There is a small screw visible in the steel panel to fix something into place. Its not really noticeable, but youll see it if you zoom in on the main photo. Some kind of expanding filler is visible when you open the tape/radio deck hood on the right hand bracket. The infra-red receiver on the left of the Beocenter needs to be glued back into place, but this should be a simple fix. Most of you wont really care about the above and will be chiefly interested in the MMC3. If thats the case then please bear in mind that I considered listing separately, but would like the Beocenter taken off my hands as I just dont have the space for it any more. Collection only as these things are incredibly fragile. Dont have the B&O speaker connectors any more (lost in house move) so will struggle to provide a full demo, but do have a pair of rudimentary headphones that will prove it functions.

BANG OLUFSEN MMC3 Stylus Cartridge B&O Beocenter 2200, 7700, 7007, Beogram 1800.

Bang & Olufsen Beocenter 7700, master control panel 7700 & working B&O MMC3. Designed by Jacob Jensen in 1982, the Beocenter 7700 was the dawn of the Beolink® system. Years ahead of its time, you could control your stereo and speakers from all around the house. This listing comprises of the Beocenter 7700, the 7700 Master Control Panel and an original, working MMC3 nudeline elliptical diamond cartridge. The Beocenter is in working order although Ive been unable to properly test the tape deck. The radio works, but a new aerial is required in order for it to tune to stations effectively. The main event, the turntable works perfectly as does the light in the hood above the platter. The LCD display also functions and can be controlled by the Master Control Panel, which works aside from the LCD displays. As with most units of this age, it has its quirks. The panel above the tape/radio deck doesnt stand up on its own and a previous owner has made some attempts to fix that without success. There is a small screw visible in the steel panel to fix something into place. Its not really noticeable, but youll see it if you zoom in on the main photo. Some kind of expanding filler is visible when you open the tape/radio deck hood on the right hand bracket. The infra-red receiver on the left of the Beocenter needs to be glued back into place, but this should be a simple fix. Most of you wont really care about the above and will be chiefly interested in the MMC3. If thats the case then please bear in mind that I considered listing separately, but would like the Beocenter taken off my hands as I just dont have the space for it any more. Collection only as these things are incredibly fragile. Dont have the B&O speaker connectors any more (lost in house move) so will struggle to provide a full demo, but do have a pair of rudimentary headphones that will prove it functions.

EZ Sell USA Consignment Resale Center is not the owner or seller of these goods, but merely a bailee acting on behalf of the seller to facilitate the sale of the goods by holding the goods until such time as a sale is completed and the goods are shipped to the buyer. EZ Sell USA Consignment Resale Center has used its best efforts to inspect the item(s) for sale and create descriptions and furnish photographs that fairly and adequately depict the type, condition and image of the goods at the time of sale. EZ Sell USA Consignment Resale Center makes no express or implied warranties or representations regarding the condition or suitability of the goods and to the extent allowed by law, specifically disclaims any express or implied warranties, including but not limited to any warranty of merchantability or fitness for purpose. EZ Sell USA Consignment Resale Center reserves the right to cancel bids on any item due to feedback. Powered by CrossPostit

Bang & Olufsen Beocenter 7700 with MMC4 & Remote Control in Excellent Condition. This was the top of the range model upon its release. All system components work perfectly. Turntable running at right speeds with cartridge and stylus in excellent condition. The turntable is fully automated and will start from remote even when on standby. It recognises when there is a record on the turntable from weight. The turntable lid sits flush and opens elegantly at a touch of the open button. The light works which sits in the lid and helps illuminate the record/vinyl. Tonearm is balanced at the right weight and this MMC4 sits close and parallel like a mini version of the Super OM10/20 cartridge stylus combo do. Tape deck working with eject button slowly opening tape part slowly and elegantly. Radio working with ability to set presets which can all be found via remote control as well on either frequency. This amp sounds magnificent with some really good power behind it. I recently refitted all new feet so the system sits perfectly flat. Tape 2 inputs (which I used for a streamer) work great and this input can also be used by the remote. All LED panels work correctly displaying all the correct characters which is a common fault so it is rare to find one like this. Remote control also in excellent condition. Comes with high end speaker wire with the necessary 2 pin din connectors. Speakers not included. Negative parts - Ive highlighted small knocks on front right and left (sadly common) but these dont take away from the high end and very cool, standout wow factor of this magnificent system. Also the metal door on the right doesnt spring up slowly anymore but manually rises and sits nicely in position. That is it and as said these issues dont detract from the incredible sound, visual and tactile experience. Type no: 1811 Power output RMS DIN: 2 x 40 W / 4 ohms Harmonic distortion: <0,1% Intermodulation: <0,3% Frequency range + / - 1,5 Db: 20 - 30000 Hz FM sensitivity stereo 46dB: <25 microvolts/75 ohms FM harmonic distortion: <0,2% FM Stereo channel separation > 35dB AM sensitivity 20dB LW/MW: < 100/80 microvolts Record player - pickup: MMC4 Recommended tracking force: 12mN/1.2g Speeds: 33 - 45 rpm Wow & flutter DIN: <+/- 0.09% Rumble weighted: >65dB Rumble unweighted: >45dB Tape recorder - Wow & flutter DIN: <+/- 0,15% Speed deviation: <+/- 1,5% Fast forward & rewind: 70 sec Frequency range metal/chrome: 30 - 16KHz Signal-to-noise ratio Metal Dolby NR: >66dB Chrome Dolby NR: >64dB Ferro Dolby NR: >62dB Metal: >59dB Chrome >57dB Power supply: 110-130-220-240 V Frequency/consumption: 50-60 Hz/250V Finishes: teak or rosewood Dimensions W x H x H/weight: 72 x 9,5 x 38cm/16,5kg

BANG & OLUFSEN Master Control Panel MCP 7700 Remote. Working. Slight pixilation in one window.

Cyrus 6 DAC Amplifier with almost 3 years warranty cover from Richer Sounds which was purchased along with the amp (see receipt). In excellent condition with no scratches or marks comes in brushed black. Comes with original box and remote control. Great sounding amp with incredible build quality.

Bang & Olufsen Beocenter 7700, master control panel 7700 & working B&O MMC3. Designed by Jacob Jensen in 1982, the Beocenter 7700 was the dawn of the Beolink® system. Years ahead of its time, you could control your stereo and speakers from all around the house. This listing comprises of the Beocenter 7700, the 7700 Master Control Panel and an original, working MMC3 nudeline elliptical diamond cartridge. The Beocenter is in working order although Ive been unable to properly test the tape deck. The radio works, but a new aerial is required in order for it to tune to stations effectively. The main event, the turntable works perfectly as does the light in the hood above the platter. The LCD display also functions and can be controlled by the Master Control Panel, which works aside from the LCD displays. As with most units of this age, it has its quirks. The panel above the tape/radio deck doesnt stand up on its own and a previous owner has made some attempts to fix that without success. There is a small screw visible in the steel panel to fix something into place. Its not really noticeable, but youll see it if you zoom in on the main photo. Some kind of expanding filler is visible when you open the tape/radio deck hood on the right hand bracket. The infra-red receiver on the left of the Beocenter needs to be glued back into place, but this should be a simple fix. Most of you wont really care about the above and will be chiefly interested in the MMC3. If thats the case then please bear in mind that I considered listing separately, but would like the Beocenter taken off my hands as I just dont have the space for it any more. Collection only as these things are incredibly fragile. Dont have the B&O speaker connectors any more (lost in house move) so will struggle to provide a full demo, but do have a pair of rudimentary headphones that will prove it functions.

Bang & Olufsen Beocenter 7700 with Remote Control in Excellent Condition. Comes with 2 x Beovox S55 speakers and 2 x smaller B&O speakers. Features Long, Medium and FM band radio, Automatic record deck, Micro-controlled cassette deck. Comes with Brochure. Same owner since new. Will require a new aerial as in need of repair. Cash on collection. Collection only from Coulsdon, Surrey.

EZ Sell USA Consignment Resale Center is not the owner or seller of these goods, but merely a bailee acting on behalf of the seller to facilitate the sale of the goods by holding the goods until such time as a sale is completed and the goods are shipped to the buyer. EZ Sell USA Consignment Resale Center has used its best efforts to inspect the item(s) for sale and create descriptions and furnish photographs that fairly and adequately depict the type, condition and image of the goods at the time of sale. EZ Sell USA Consignment Resale Center makes no express or implied warranties or representations regarding the condition or suitability of the goods and to the extent allowed by law, specifically disclaims any express or implied warranties, including but not limited to any warranty of merchantability or fitness for purpose. EZ Sell USA Consignment Resale Center reserves the right to cancel bids on any item due to feedback. Powered by CrossPostit

Bang & Olufsen Beocenter 7700 with MMC4 & Remote Control in Excellent Condition. This was the top of the range model upon its release. All system components work perfectly. Turntable running at right speeds with cartridge and stylus in excellent condition. The turntable is fully automated and will start from remote even when on standby. It recognises when there is a record on the turntable from weight. The turntable lid sits flush and opens elegantly at a touch of the open button. The light works which sits in the lid and helps illuminate the record/vinyl. Tonearm is balanced at the right weight and this MMC4 sits close and parallel like a mini version of the Super OM10/20 cartridge stylus combo do. Tape deck working with eject button slowly opening tape part slowly and elegantly. Radio working with ability to set presets which can all be found via remote control as well on either frequency. This amp sounds magnificent with some really good power behind it. I recently refitted all new feet so the system sits perfectly flat. Tape 2 inputs (which I used for a streamer) work great and this input can also be used by the remote. All LED panels work correctly displaying all the correct characters which is a common fault so it is rare to find one like this. Remote control also in excellent condition. Comes with high end speaker wire with the necessary 2 pin din connectors. Speakers not included. Negative parts - Ive highlighted small knocks on front right and left (sadly common) but these dont take away from the high end and very cool, standout wow factor of this magnificent system. Also the metal door on the right doesnt spring up slowly anymore but manually rises and sits nicely in position. That is it and as said these issues dont detract from the incredible sound, visual and tactile experience. Type no: 1811 Power output RMS DIN: 2 x 40 W / 4 ohms Harmonic distortion: <0,1% Intermodulation: <0,3% Frequency range + / - 1,5 Db: 20 - 30000 Hz FM sensitivity stereo 46dB: <25 microvolts/75 ohms FM harmonic distortion: <0,2% FM Stereo channel separation > 35dB AM sensitivity 20dB LW/MW: < 100/80 microvolts Record player - pickup: MMC4 Recommended tracking force: 12mN/1.2g Speeds: 33 - 45 rpm Wow & flutter DIN: <+/- 0.09% Rumble weighted: >65dB Rumble unweighted: >45dB Tape recorder - Wow & flutter DIN: <+/- 0,15% Speed deviation: <+/- 1,5% Fast forward & rewind: 70 sec Frequency range metal/chrome: 30 - 16KHz Signal-to-noise ratio Metal Dolby NR: >66dB Chrome Dolby NR: >64dB Ferro Dolby NR: >62dB Metal: >59dB Chrome >57dB Power supply: 110-130-220-240 V Frequency/consumption: 50-60 Hz/250V Finishes: teak or rosewood Dimensions W x H x H/weight: 72 x 9,5 x 38cm/16,5kg