We had this model in the shop and it just displayed a #3 on the display and would not do anything so I opted to part it out. Base is in great condition, very minor paint loss, no dents or dings or rust. Great replacement base if yours is beat up. Please let me know if you have any questions and thanks for looking!

We had this model in the shop and it just displayed a #3 on the display and would not do anything so I opted to part it out. Part is in great condition with no damage, obviously you will need to glue this piece to the hinge flip up piece. Great replacement if yours is missing or beat up. Please let me know if you have any questions and thanks for looking!

We had this model in the shop and it just displayed a #3 on the display and would not do anything so I opted to part it out. Part is in great condition with no damage. Please let me know if you have any questions and thanks for looking!

We had this model in the shop and it just displayed a #3 on the display and would not do anything so I opted to part it out. Part is in great condition, nice and straight, no wear. This is the Spindle Rod the motor for the tonearm attaches to. Please let me know if you have any questions and thanks for looking!

We had this model in the shop and it just displayed a #3 on the display and would not do anything so I opted to part it out. Part is in great condition, nice and straight, no wear. This is the shorter 6.75 rod or guide for the tonearm to run across. Please let me know if you have any questions and thanks for looking!

We had this model in the shop and it just displayed a #3 on the display and would not do anything so I opted to part it out. Part is in great condition, nice and straight, no wear. This is the longer 12 rod or guide for the tonearm to run across. Please let me know if you have any questions and thanks for looking!

We had this model in the shop and it just displayed a #3 on the display and would not do anything so I opted to part it out. Part is in good condition, a bit of wear to the flathead piece you turn to lock this in place as pictured. This plate has the little brush on it that cleans the needle. Please let me know if you have any questions and thanks for looking!

Part is untested, we had this model in the shop and it just displayed a #3 on the display and would not do anything so I opted to part it out, so this part is untested. However the Main PCB board had a burnt out capacitor so I am pretty sure that was the problem so this part should be good to go, and the cable is in great physical condition. Please let me know if you have any questions and thanks for looking!

Part is untested, we had this model in the shop and it just displayed a #3 on the display and would not do anything so I opted to part it out, so this part is untested. However the Main PCB board had a burnt out capacitor so I am pretty sure that was the problem so this part should be good to go, and the display did work so I assume this power supply is good to go. Please let me know if you have any questions and thanks for looking!

Part is untested, we had this model in the shop and it just displayed a #3 on the display and would not do anything so I opted to part it out, so this part is untested. However the Main PCB board had a burnt out capacitor so I am pretty sure that was the problem so this part should be good to go, but of course I can not say for sure since I was not able to test it. Excellent top notch physical condition with no damage. Please let me know if you have any questions and thanks for looking!

Part is untested, we had this model in the shop and it just displayed a #3 on the display and would not do anything so I opted to part it out, so this part is untested. However the Main PCB board had a burnt out capacitor so I am pretty sure that was the problem so this part should be good to go, but of course I can not say for sure since I was not able to test it. Hard to say how much life left in the needle but it looks like it should have some. Please let me know if you have any questions and thanks for looking!

Part is untested, we had this model in the shop and it just displayed a #3 on the display and would not do anything so I opted to part it out, so this part is untested. However the Main PCB board had a burnt out capacitor so I am pretty sure that was the problem so this part should be good to go, but of course I can not say for sure since I was not able to test it. Please let me know if you have any questions and thanks for looking!

Part is untested, we had this model in the shop and it just displayed a #3 on the display and would not do anything so I opted to part it out. I believe the issue was on this board as there is a visible burnt out capacitor as you can see in the pics. Only wire I had to snip was the black wire that goes to the display and I left plenty of wire to work with. You should expect to have to fix that burnout to get this board to work. Please let me know if you have any questions and thanks for looking!

Part is untested, we had this model in the shop and it just displayed a #3 on the display and would not do anything so I opted to part it out. Not sure where the problem was with it so this part is untested. I assume this part works since it was displaying a #3 on the far right, but could not say for the other digits, plus the main PCB had a capacitor burnout so I am pretty sure the problem was in that board and this part should be good to go. Only wire I had to snip was the black wire that goes to the main board and I left plenty of wire to work with. Please let me know if you have any questions and thanks for looking!

Part is untested, we had this model in the shop and it just displayed a #3 on the display and would not do anything so I opted to part it out, so this part is untested. However the Main PCB board had a burnt out capacitor so I am pretty sure that was the problem so this part should be good to go. I did have to snip the wires as you can see in the pics, but I left plenty of wire to work with. Please let me know if you have any questions and thanks for looking!

Part is untested, we had this model in the shop and it just displayed a #3 on the display and would not do anything so I opted to part it out, so this part is untested. However the Main PCB board had a burnt out capacitor so I am pretty sure that was the problem so this part should be good to go, but of course I can not say for sure since I was not able to test it. I did have to snip the wires as you can see in the pics, but I left plenty of wire to work with. Please let me know if you have any questions and thanks for looking!

Part is untested, we had this model in the shop and it just displayed a #3 on the display and would not do anything so I opted to part it out, so this part is untested. However the Main PCB board had a burnt out capacitor so I am pretty sure that was the problem so this part should be good to go, but of course I can not say for sure since I was not able to test it. I did have to snip the wires as you can see in the pics, but I left plenty of wire to work with. Please let me know if you have any questions and thanks for looking!

Part is untested, we had this model in the shop and it just displayed a #3 on the display and would not do anything so I opted to part it out, so this part is untested. However the Main PCB board had a burnt out capacitor so I am pretty sure that was the problem so this part should be good to go, but of course I can not say for sure since I was not able to test it. I did have to snip the wires as you can see in the pics, but I left plenty of wire to work with. Please let me know if you have any questions and thanks for looking!

Part is untested, we had this model in the shop and it just displayed a #3 on the display and would not do anything so I opted to part it out, so this part is untested. However the Main PCB board had a burnt out capacitor so I am pretty sure that was the problem so this part should be good to go, but of course I can not say for sure since I was not able to test it. I did have to snip the wires as you can see in the pics, but I left plenty of wire to work with. Please let me know if you have any questions and thanks for looking!

Part is untested, we had this model in the shop and it just displayed a #3 on the display and would not do anything so I opted to part it out, so this part is untested. However the Main PCB board had a burnt out capacitor so I am pretty sure that was the problem so this part should be good to go, but of course I can not say for sure since I was not able to test it. I did have to snip the wires as you can see in the pics, but I left plenty of wire to work with. Please let me know if you have any questions and thanks for looking!

Bang Olufsen PCB Amplifier Beolab 4 8002619 Verpackung ist light beschädigt! Fehlern können Sie im Bilder zu sehen!Neu mit opened Box! Deutsch: ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ Alle Produkte versehen wir mit möglichst detaillierter Beschreibung Wir laden die Fotos von Produkten in bester Qualität hoch. Falls Sie in einem von uns nicht angegebenen Land kaufen möchten, geben Sie uns Bescheid, und wir bieten Ihnen eine günstige Versandmöglichkeit an. Die Preise verstehen sich inclusive der gesetzlichen Mehrwertsteuer. Das zum Kauf angebotene Produkt: - Die Produktverpackung ist beschädigt, in dem auf dem Bild gezeigten Zustand, aber das Produkt ist neu, unbenutzt, nie in Betrieb gesetzt / eingeschaltet Falls Sie über eine Umsatzsteuernummer oder Umsatzsteuer-Identnummer verfügen, teilen Sie uns diese mit. Wenn für Sie die Ausnahmen nach dem Umsatzsteuergesetz (UStG § 4 Abs. 1 bis 6) zutreffen oder Sie als Kleinunternehmer nach § 19 UStG tätig sind außerhalb von Europa das Produkt kaufen möchten, melden Sie uns das bitte vor der Lieferung, damit wir die Rechnung zum Nettopreis stellen können. Voraussetzungen der Umsatzsteuerbefreiung sind u.a.: - Ausfuhrlieferungen und Lohnveredlungen an Gegenständen der Ausfuhr - Waren der Einfuhr in das Gebiet eines EU-Mitgliedstaates - Zielland ist entweder ein Land außerhalb der EU oder ein sogen. Drittland Sehr geehrter Kunde, wir bedanken uns für Ihre Interesse an dem von uns angebotenes Produkt. Sollten Sie Fragen haben, wenden Sie sich bitte vertrauensvoll an uns. Wir werden Sie bestmöglich beraten. English: ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ All our products are provided with a description of utmost care. Photographs of the products are uploaded in the highest quality possible. In case you want to have the products shipped into a country not specified by us, please let us know and we will send you a competitive offer. Prices of the products are gross prices including VAT. We issue an invoice of the product in every case. The products offered for sale are: - The product packaging is damaged, in the condition shown in the picture, new, never used or installed If you have a valid EU VAT number or want to have the product shipped outside Europe please let us know before you buy the product because in this case the product can be sold at a net price. We are able to issue an invoice of the net price only if it is in compliance with the conditions, it was indicated by the customer and the price was switched over to the net price beforehand. Conditions of net invoicing: - The customer must have a valid EU VAT number (we are able to deliver the product to the registered office of the company and issue the invoice to the same name and address) - The country of destination is either a third country or a country outside the European Union We accept PayPal, and Transfer. Thank you for your interest in our product put up for sale. If you have any questions please feel free to contact us. Stock code: 219,95 eur - Bockhorn 4-7 2es

Sie bieten hier auf ein TOP Paar B&O Bang & Olufsen Beolab 8002! You’re bidding a STUNNING pair B&O Bang & Olufsen Beolab 8002! Im Auktion angeboten: Ein paar Beolab 8002. Es sind die Nachfolger des Beolabs 8000 mk2. UNGLAUBLICH SCHÖNEN SOUND! Direkt vom Fachladen. Die Lautsprecher befinden sich in einen absoluten TOPzustand! 2 Stromkabeln sind inklusive. 2 Powerlinkkabeln (2 x 5M) gegen EUR 40,- Aufpreis. Für EUR 599,- extra liefern wir - statt die schwarze Abdeckungen - die beliebte Abdeckungen aus massives Eiche! (bitte sehe das Bild mit Beolab 8000 mit Abdeckungen aus Holz) Oder.... ganz neu vom Labor: Abdeckungen aus Eiche kombiniert mit aluminum Blenden. Zeitloses design... EUR 899,- extra. ABSOLUUT ZEITLOSES DESIGN. Originalfotos. Professioneller Versand. Persönliche Abholung und Barzahlung? Gerne! © Copyright: Alle Rechte vorbehalten. Nachdruck und Vervielfältigung der redaktionellen Texte einschliesslich Speicherung und Nutzung auf optischen und elektronischen Datenträgern nur mit Zustimmung von CSGRASCH. Die ganze oder teilweise Verwertung von Inseraten (inkl. Einspeisung in Online-Dienste) durch unberechtigte Dritte ist untersagt. Here for auction offered: A SUPERB pair B&O Beolab 8002 speakers from Danish superbrand Bang & Olufsen. The 8002 are the successors of the Beolab 8000 mk2 speakers. Directly from the B&O store. IMMACULATE condition! STUNNING AND ABSOLUTELY TIMELESS DESIGN. 2 powercables are included. 2 powerlink cables (2 x 5 meter) for EUR 40,- extra. For an additional EUR 599,-, rather then the black textile covers, we ship a stunning pair of covers, made out of solid oak! (pls check picture) Newly released from our design department: brandnew covers made of massive oak AND aluminum blends! Unique on the market. This brings the looks of the 8000- series to a new level! These extremely exclusive covers cost EUR 899,- extra. Non smoking house-hold. Original pictures. Professional packaging in two boxes. Personal pickup and cash payment is not a problem. © Copyright: No part of this internetpage may be reproduced in any form without written permission from CSGRASCH

Bang & Olufsen Beolab 8000 MK 2 Lautsprecher Set ( 2 Stück ) mit Standfuß. Schwarz Technisch und optisch im top Zustand. Mit Rechnung und 12 Monaten Gewährleistung. Lieferumfang: Bang & Olufsen Beolab 8002 Set ( 2 Stück ) MK 3 Serial Nr.: 21xxxxxx Schwarz Mit Stromkabel Versicherte Versand mit DHL Bei Fragen, bitte per Mail. Weitere Bang & Olufsen Audio Geräte auf Anfrage. Der Endpreis unterliegt der Differenzbesteuerung nach & 25 UStG.

Up for auction is a very rare fully working B&O Beogram 8002 with a fully working MMC3 cartridge.Please see video and pictures. There is a very detailed and complex method for shipping these turntables. Because of that shipping will be $125.00.This will assure you that the turntable arrives as I have shown it. Shipped Fed-ex group with a signature confirmation required.