Tested Good working . Shipping us only.

Tested Good working . Shipping us only.

Up for sale is a pair of B&W 802 Series 80 speakers with the Fibercrete heads. These are sequential serial number 10547 and 10548 which I believe puts them pretty far near the end of the original Series 80 run. Im selling them due to the size, they cant fit in my usual listening room. These are in excellent cosmetic condition, the cabinets were near perfect so I replaced all of the grill cloth with new cloth sourced from Simply Speakers in their dark chocolate color. The original cloths were faded and threadbare on some of the corners. I also straightened the metal frames under the cloth on the top of the speakers, ensuring it was all flat and level. These 801s are also equipped with the casters on the bottom, making them easy to reposition. There are 2-3 small scuffs that I took closeups of on the speakers, however they are not scratches as I cant catch any edge with my fingernail. It may be easy to fix them, but I didnt want to risk damaging the lovely veneer. One area of oddity is the manufacturing plate on the back of one of the speakers was out of place, figuring someone had attempted to refinish them at one point I removed the plate to put it in the correct spot. I then saw that the plate had been there for many years, likely originally placed in the incorrect area. You can see the veneer where it was is darker in color as the veneer lightened over the years due to exposure to light. I have not firmly affixed the plate in any location, Id like to give the future owner the option to put it where it was, over the dark area, or where it should be over the connections. Sonically I dont hear any issues, I dont have a reference point to go off of as they are the only 801s Ive heard. But there is no rattling from the speakers or audible rubbing from the voicecoils. Also due to the shape the speakers were in, I dont believe that the crossovers have ever been worked on as it doesnt look like the drivers had ever been removed. These are for local pickup in the Chicagoland area only, due to the weight and size

B&W Bowers & Wilkins 801 D Spike Foot Kit. Leider nur die Originalen rollen

FLOOR LOUDSPEAKER 801 Nautilus B&W Specifications Description: Three-way, reflex-loaded dynamic loudspeaker. Drive-units: 1 (25mm) metal-dome tweeter, 6 (150mm) woven-Kevlar-cone midrange unit, 15 (380mm) paper/Kevlar-cone woofer. Crossover frequencies: 350Hz, 4kHz Crossover type: third-order. Frequency response: 32Hz-22kHz, ±3dB. Sensitivity: 91dB/2.83V/1m. Nominal impedance: 8 ohms (3 ohms minimum). Recommended amplifier power: 50-1000W. Maximum recommended cable impedance: 0.2 ohms. Dimensions: 43.7 (1110mm) H by 20.6 (522mm) W by 27.2 (690mm) D. Net weight: 229 lbs (104kg).

Follow us| Sign up for our newsletter B&W Matrix 801 S2 - Standing Speakers w North Creek Crossovers + Sound Anchor Stands For over 20 years High End Audio Auctions has been selling the finest HiFi online, but did you know that we BUY your HiFi equipment as well? Contact our sister company STEREOBUYERS for a fair quote today! All items included are pictured. Items are tested fully to ensure all functions work as expected - any defects and additional service done to the item are noted below. Items are not restored or reconditioned, unless specified. All items we sell come with a 30-day warranty - your satisfaction is guaranteed. Original shipping on returns will be refunded at the sellers discretion. Local Pickup in NYC Available B&W Matrix 801 S2 Details & Testing Notes Cosmetic Condition:7/10: Good - some signs of wear, looks used but well-maintainedCosmetic Notes:Tweeter grills are not original to this model and are loosely attached. 1 speaker is missing the top cover grille support post. 1 speaker missing RED LED. Speaker cabinets and stands both show various scratches and blemishes. Please see all 40+ high resolution photographs, including detailed inside shots of the crossovers, below.Functional Notes:Functions as intended and sounds excellent.Other Notes:North Creek Crossover has 4 wires coming out for mid/high but only 3 binding posts on speaker. Sounded best with Orange spade to Red Post / White Spade to White Post / Blue Spade to Blue Post. Crossover has 2 wires coming out for low and 2 binding posts on speaker. Green spade to Black post / Yellow Spade to Red post Copy regarding the Crossovers: The North Creek Crossovers consists of three physically and electrically independent networks per channel, one for each driver. These networks are constructed from 1% hand matched components where the matching is done on a component level before the subassemblies are constructed. Matching is also verified during final testing. The maximum variation in left/right networks is less than ±1%, five times tighter than original production. The North Creek Networks are completely hard wired. No circuit board and foil conduction paths are used; rather, solid copper bus bar or inductor leads make main connections. This construction method results in a minimum of connections both in and out of the signal path, maintaining signal integrity.Serial #:4303Original Box:NoManual:NoAdditional Items:Sound Anchor Stands with CastersShipping Method:Flat Rate FreightShipping Weight (lbs):$250 USA $550 International High-End Audio Auctions has been THE trusted source for high-end, classic and vintage audio components on eBay since 2000! Our unique products, unparalleled service and bombproof packaging keeps our customers coming back again and again. We are experts at selling and shipping worldwide, with items ranging from $5 to $50,000. We look forward to earning your repeat business! By placing a bid on any of our listings, you agree to our terms & conditions Click here to learn more Home| About Us| Store Policies| FAQs| Feedback| Contact Us| Custom Tuned Cables _gsrx_vers_1436 (GS 9.0.5 (1436))

B&W Bowers & Wilkins 801 D Spike Foot Kit. Leider nur die Originalen rollen

FLOOR LOUDSPEAKER 801 Nautilus B&W Specifications Description: Three-way, reflex-loaded dynamic loudspeaker. Drive-units: 1 (25mm) metal-dome tweeter, 6 (150mm) woven-Kevlar-cone midrange unit, 15 (380mm) paper/Kevlar-cone woofer. Crossover frequencies: 350Hz, 4kHz Crossover type: third-order. Frequency response: 32Hz-22kHz, ±3dB. Sensitivity: 91dB/2.83V/1m. Nominal impedance: 8 ohms (3 ohms minimum). Recommended amplifier power: 50-1000W. Maximum recommended cable impedance: 0.2 ohms. Dimensions: 43.7 (1110mm) H by 20.6 (522mm) W by 27.2 (690mm) D. Net weight: 229 lbs (104kg).

For your consideration today is a used pair of Bowers and Wilkins Nautilus 801 N801 speakers. These speakers work 100% all drivers are good and working and crossovers are good and working as well. When I purchased these the tweeters were completely destroyed on each one. The tweeter housings were good and present so I ordered new B&W tweeter driver units as well as new screens and retainers for the screens for both. I used only genuine B&W parts and no aftermarket parts. The cabinets because of rough handling before I purchased them have suffered some. I have tried to picture the blemishes in the cabinets but they are very hard to picture. These speakers sound amazing but I dont have the proper equipment to run them to their full potential and I really dont have room for them either. You can hear them play with my equipment hooked up to them but a proper audition of them is really not possible. I know that cosmetic condition is really important to alot of audiophiles and these are not 100% on cosmetics so I feel that I have them priced accordingly with their condition. If the Bowers and Wilkins sound is what you are after you have come to the right place! I also have the matching Nautilus HTM1 NHTM1 center channel as well these available in another listing if you are interested in it. I might be willing to ship it but would rather it be picked up as well. I will not ship these due to their size and weight so please do not ask. They are located in Hindsville Arkansas 72738 if you want to map to see how far it would be to pick them up. These weigh 230 pounds each speaker and are very hard to move so please bring good help to load.

B&W Bowers & Wilkins 801 D Spike Foot Kit. Leider nur die Originalen rollen

B&W Bowers & Wilkins 801 D Spike Foot Kit. Leider nur die Originalen rollen

B&W Bowers & Wilkins 801 D Spike Foot Kit. Leider nur die Originalen rollen

B&W Bowers & Wilkins 801 D Spike Foot Kit. Leider nur die Originalen rollen

2 x B&W Bowers & Wilkins Matrix 801 Series 3 Generic Replacement Tweeter Loudspeakers Coils Foils.Always fit in pairs, that way they will look exactly the same & they will also sound exactly the same.You are buying a pair of generic replacement tweeter coils & foils (as seen on these pictures) to fit the bowers & wilkins matrix 800 series loudspeakers.They are a very good replacement for your old blown or dented tweeters.Dependant on when exactly your tweeters were made, these will either slot straight into place or you will find they are about 1.5mm wider that the slot for them.If they are slightly wider, then all you need to do is to put a very thin edge of superglue around the edge of your plastic tweeter surround (use the tip of a cotton bud) & then place the tweeter coil - foil in place using the magnet part of your complete unit to line it up while the glue sets.BEFORE you first open the tweeter up make sure that you mark the position of both parts of the tweeter, they slot together in a certain place & marking them before opening them will save you loads of time & agro later on.You will need the following tools to fit these.A philips screwdriver (small - medium head)A flathead screwdriver (small - medium head)A soldering iron & solder.Some superglug & a cotton bud.These replacement tweeter coils & foils can be used with many bowers & wilkins loudspeakers.You will need a steady hand, a fair degree of common sence (like do not glue into place until you have made sure it fits together correctly) & a few minutes spare time when fitting these.REMEMBER, THEY ARE VERY DELICATE, NO RETURNS ON ANY COILS - FOILS THAT YOU DAMAGE WHILST FITTING THEM.RETURNS ON BRAND NEW NOT FITTED COILS - FOILS ONLY.If you are not still not sure about fitting these, in the first instance have a look on youtube, you will be able to find videos on there showing what to do.If you still have issues, then send an email through ebay messaging to us, we will attempt to get back to you within 24hrs (we are NOT sat on the computer 24/7)FREE UK SHIPPING ON THIS ITEM.All items are sent by signed for & recorded delivery.

B&W dm16,matched pair in full working order and sound fantastic-these was top of bw dm range before the matrix 801-very rarely come up for sale,all drive untis fully working and complete with stands and grills.very minor age related marks and small chip in rear left hand corner (see pic)full demo on pick up,no post as way to heavy.cash on collection only.I have another pair in black ash that im going to restore so decided to sell this pair as these are much better condition.pick up/cash only.

B&W MODEL 801/2 LOUDSPEAKERS (Sales Brochures) Series 80 Pre-Release information Sales brochures in mint condition (1979) ------------------------------ Thanks for looking.

B&W MODEL 801/2 LOUDSPEAKERS (Sales Brochures) Series 80 Pre-Release information Sales brochures in mint condition (1979) ------------------------------ Thanks for looking.

2 x B&W Bowers & Wilkins Matrix 801 Generic Replacement Tweeter Loudspeakers Coils Foils.Always fit in pairs, that way they will look exactly the same & they will also sound exactly the same.You are buying a pair of generic replacement tweeter coils & foils (as seen on these pictures) to fit the bowers & wilkins matrix 800 series loudspeakers.They are a very good replacement for your old blown or dented tweeters.Dependant on when exactly your tweeters were made, these will either slot straight into place or you will find they are about 1.5mm wider that the slot for them.If they are slightly wider, then all you need to do is to put a very thin edge of superglue around the edge of your plastic tweeter surround (use the tip of a cotton bud) & then place the tweeter coil - foil in place using the magnet part of your complete unit to line it up while the glue sets.BEFORE you first open the tweeter up make sure that you mark the position of both parts of the tweeter, they slot together in a certain place & marking them before opening them will save you loads of time & agro later on.You will need the following tools to fit these.A philips screwdriver (small - medium head)A flathead screwdriver (small - medium head)A soldering iron & solder.Some superglug & a cotton bud.These replacement tweeter coils & foils can be used with many bowers & wilkins loudspeakers.You will need a steady hand, a fair degree of common sence (like do not glue into place until you have made sure it fits together correctly) & a few minutes spare time when fitting these.REMEMBER, THEY ARE VERY DELICATE, NO RETURNS ON ANY COILS - FOILS THAT YOU DAMAGE WHILST FITTING THEM.RETURNS ON BRAND NEW NOT FITTED COILS - FOILS ONLY.If you are not still not sure about fitting these, in the first instance have a look on youtube, you will be able to find videos on there showing what to do.If you still have issues, then send an email through ebay messaging to us, we will attempt to get back to you within 24hrs (we are NOT sat on the computer 24/7)FREE UK SHIPPING ON THIS ITEM.All items are sent by signed for & recorded delivery.

B&W dm16,matched pair in full working order and sound fantastic-these was top of bw dm range before the matrix 801-very rarely come up for sale,all drive untis fully working and complete with stands and grills.very minor age related marks and small chip in rear left hand corner (see pic)full demo on pick up,no post as way to heavy.cash on collection only.I have another pair in black ash that im going to restore so decided to sell this pair as these are much better condition.pick up/cash only.