AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

Bang & Olufsen B&O Beolab 2000 wall bracket. its used a couple of scratches here and there but in excellent condition

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

Bang & Olufsen B&O Beolab 2000 wall bracket. its used a couple of scratches here and there but in excellent condition

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

Genuine Bang Olufsen Product ! Beolab 50 in Gold ( left speaker and right speaker for one set ) COMPLETED SET WITH POWER CABLE AND ORIGINAL B&O BOX . BEOLAB 50 is built in speakers & sub together Wireless WISA - Speaker / Subwoofer MSRP $47000 USD Custom front Grill in OEM Aluminum in GOLD ( MSRP $5000 ) not available in any where, it is special order parts . ( also include Black Mesh Grill for front if you dont like Gold Aluminum grill ) . both are included in listing . back side are oak walnut wood grill . TOTAL WAS $52000 PLUS TAX - Wireless only work on bang Olufsen TV call Wireless WISA . If you have NON Bang Olufsen TV you need connect by audio cable ( not include ) . Only bang Olufsen TV can pair with wireless Wisa. LIGHT WEAR USE ONLY ! VERY LIMITED PRODUCTION . HAVE ORIGINAL BOX . NO BOOKLET . YOU CAN PRINT OUT FROM ONLINE . EACH SPEAKER HAS ABOUT 120-150LBS WITH BOX. TOO HEAVY AND ONLY OFFER FOR PICKUP . ((( NOTE TV IS NOT INCLUDE OR NOT FOR SELL , IF YOU WANT TV, I CAN SELL FOR $14500 ( MSRP ON THAT B&O 65 inch TV WITH GOLD GRILL ARE CLOSER TO $19000 PLUS TAX ) HAVE BOX AS WELL . Thank you and pickup only Orange County California 92602 .

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...

AUX 3.5mm Jack Plug to BeoLab 2000 MasterLink Cable(B&O Remote Control Required for Control i.e. Beo4/BeoLink 1000)(Length: 0.5 Metre - Two-Section Cable)No Reserve Price Finally, a brilliant cable solution to allow you to connect a device to your BeoLab 2000 We are pleased to bring to market this new range of BeoLab 2000 AUX cables. The long awaited cable solution will allow you to connect any device with a 3.5mm headphones/audio OUT connection. Typical examples include, iPad, iPhone, iPod, Android device, TV, computer etc etc. The cable, which consists of two sections (see photographs) connects to the device at one end and the MasterLink plug to the BeoLab 2000, at the other. You will require a B&O remote control, such as a BeoLink 1000 or Beo4, to setup the BeoLab 2000 in to AUX mode. Having setup, you may also wish to control volume level, switch on and off/standby using the remote, although control can be achieved using the hands-on control to BeoLab 2000. The setup process is only made once and does not need to be exercised each and every time you switch on BeoLab 2000. The only time you will need to re-programme is if you have a power cut. This solution allows for complete stand-alone use of the BeoLab 2000 as a loudspeaker. You do not need any other product/a connection to a main B&O setup in order to use in this setup (other than your connected device, of course - iPad etc.). Available in a range of different lengths and also in black or white - Ideal should you have your BeoLab 2000 wall mounted and you need a longer cable.We also have different source connection types available, such as RCA plugs. Available from our eBay store as a different item and also as buy it now. An Instruction set is included with your purchase for programming BeoLab 2000. Payment and Delivery Preferred payment by PayPal, cheque, bank transfer or cash on collection. FAST & FREE STANDARD UK DELIVERY Please click HERE to go to our eBay store home page Custom lengths of cables are available - Please contact us for a quote... Colour: WhiteTotal Length: 0.5 Metre (MasterLink Plug Cable Section Approx. 0.25 Metre) FAST & FREE STANDARD UK DELIVERY Happy Bidding & Good Luck...