AudioQuest Sydney RCA cable in ‘like new’ condition as only tested for less than an hour. The cable offers superior sound quality, there is an immediate discernible difference (heightened) in brilliance and bass response over other cables. One of the better built interconnects and value at this price.

New 1m AudioQuest Sydney RCA Stereo Analogue Interconnect 2 RCA to 2 RCAThis listing is for a New 1m AudioQuest Sydney RCA Stereo Analogue Interconnect 2 RCA to 2 RCA. Normally £239Sydneys Perfect-Surface Copper+ has an astonishingly smooth and pure surface. Proprietary metal-processing technology protects the wire’s surface at every stage of drawing and fabrication.Audioquest Sydney 2 RCA to 2 RCA Audio CableSolid Perfect-Surface Copper+ Conductors (PSC+) :Perfect-Surface Copper+ has an astonishingly smooth and pure surface. Proprietary metal-processing technology protects the wire’s surface at every stage of drawing and fabrication. When high-purity low-oxide copper is kept as soft, pure and smooth as possible, it becomes a wonderfully low-distortion PSC+ conductor. PSC+ is manufactured by applying the same exceptional technology to an ultra-pure copper. The resulting sound quality is even more focused and simply less in the way. For over 30 years AudioQuest has pioneered the use of superior metals; yet even we were surprised by the huge leap in performance made possible with Perfect-Surface Technology.PSC+ simply outperforms all previously available copper metals at any price. All of Sydneys conductors are solid. Electrical and magnetic interaction between strands in a conventional cable is the greatest source of distortion, often causing a somewhat dirty, harsh sound. Solid conductors are fundamental toward achieving Sydney’s very clean sound.Polyethylene Air-Tube Insulation :Insulation is necessary to keep the positive and negative conductors separate and to give stability to cable geometry. Insulation is also a dielectric because it is inside the conductors magnetic field. Dielectrics absorb energy, which after a delay is then released in the signal, causing smearing and distortion. Better insulation reduces distortion by absorbing less energy.All of Sydney’s conductors use PE Air-Tube Insulation because air absorbs next to no energy, and Polyethylene is low-loss and has a benign distortion profile. PE Air-Tube Insulation causes much less of the out-of-focus effect common to other materials.Carbon-Based 3-Layer Noise-Dissipation System (NDS) :100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation System. Noise-Dissipation System prevents a significant amount of RFI from reaching the equipment’s ground plane.AudioQuest’s Noise-Dissipation System (NDS) offers a compelling solution to this challenge by using metal-only or alternating layers of metal and carbon-loaded synthetics to effectively “shield the shield,” absorbing and reflecting the Radio Frequency (RF) energy before it reaches the layer attached to the ground.The Sydney ultilises the Carbon-Based 3-Layer Noise-Dissipation System (NDS) to prevent most RFI from reaching the equipment’s ground plane.Double-Balanced Asymmetrical Geometry :Geometry is the physical relationship of the conductors to one another within a cable and determines a cable’s most basic electrical values (capacitance and inductance). Different cable applications have different/specialized geometry requirements, and so these applications do not merely follow a ‘one size fits all’ approach. Better geometry leads to lower levels of distortion.Purpose designed for single-ended applications, Double-Balanced Asymmetrical Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.DirectionalityAudioQuest’s understanding of conductor directionality and its effect on audio performance has steadily evolved, growing stronger and more complete. All audio cables are directional. The correct direction is determined by the arrows on the plugs or cable parts.Cold-Welded Direct-Silver Plated Pure Purple-Copper RCA Plugs :AudioQuest specifies materials and designs each of its own connectors from the ground up, resulting in the long-lasting quality and exceptional performance you deserve. These components are crucial to the overall performance of a cable.To provide the best possible performance for each application, AudioQuest designs each of its connectors from the ground up. These components are crucial to the overall performance of the cable. Painstaking care is taken to evaluate the highest quality materials and design for every application.AudioQuest pays special attention to the plating it uses over its connectors’ carefully crafted base metals. This proprietary, novel plug design allows for a connection devoid of solder, which is a common source of distortion. Because the ground shells are stamped instead of machined, the metal can be chosen for low distortion instead of machine ability. Purple-Copper offers a cleaner, clearer sound than the nickel-plated or OFHC metals commonly found in competing manufacturers plugs.TERMSPlease bid with confidence, the item is exactly as described. We are authorised dealers for all new items that we sell.Guarantees & Warranties: Brand New products are covered by their respective UK and European warranties, details of which are included with the product. Any Used / Repaired / B-Stock items are sold “As Seen” without warranty unless stated otherwise in the listingReturns:Most Buy It Now purchases are protected by the Distance Selling Regulations. To cancel a Contract, you must inform us in writing, and we will provide return instructions. You must return the products to us at your own cost and risk. You will not have any right to cancel a Contract for the supply of products that have been customised for you, such as pre-cut or terminated speaker cables. This provision does not affect your statutory rights. We cannot accept returns for Ex Display / Repaired / B-Stock or items sold by auction unless the item was not as described in the listing. The buyer must contact us within 3 days of receiving the item to initiate a return. The buyer is responsible for return shipping charges.Payment:We ask that payment is made within 3 days.Shipping:All goods purchased are securely and safely packaged for transit. The cost of Packaging materials (e.g. Jiffy Bags, Bubble Wrap etc) is included in the P&P charge. Items will normally be sent within 3 working days of receipt of cleared payment.Stock:Most items are either in stock with us or our suppliers and available for dispatch within 3 days. Occasionally, an item may be awaiting stock and in these instances we will contact you to confirm you are happy to wait for the item. If availability is key for you, we recommend you check an item is in stock before placing your order.Feedback:We always reciprocate feedback. Please contact us through the eBay system if there is a problem.Images:We often use library photos on our auctions for illustrative purposes only – we are not responsible for colour variances or style updates - you will receive the model and specification stated on the auction.All product serial numbers of items sold on eBay are logged for our mutual protection.Thank you for looking at our listing, please do not hesitate to contact us should you have any questions. Please contact us through the eBay system. Regrettably, we only sell within the UK at this time so do not ask us to ship to other destinationsOFFERS: We invite offers on most items. Where an item is listed for auction, the starting bid price is usually our minimum price, and we are unlikely to accept offers below this. Responding to the high volume of offers we receive takes a considerable amount of our time, therefore unrealistic low-ball offers will either be ignored or rejected and you will be blocked from making further offers or purchasing from us.

New 1m AudioQuest Sydney RCA Stereo Analogue Interconnect 5 Pin DIN to DINThis listing is for a New 1m AudioQuest Sydney RCA Stereo Analogue Interconnect 5 Pin DIN to DIN. Normally £239Sydneys Perfect-Surface Copper+ has an astonishingly smooth and pure surface. Proprietary metal-processing technology protects the wire’s surface at every stage of drawing and fabrication.Audioquest Sydney DIN to DIN Audio CableSolid Perfect-Surface Copper+ Conductors (PSC+) :Perfect-Surface Copper+ has an astonishingly smooth and pure surface. Proprietary metal-processing technology protects the wire’s surface at every stage of drawing and fabrication. When high-purity low-oxide copper is kept as soft, pure and smooth as possible, it becomes a wonderfully low-distortion PSC+ conductor. PSC+ is manufactured by applying the same exceptional technology to an ultra-pure copper. The resulting sound quality is even more focused and simply less in the way. For over 30 years AudioQuest has pioneered the use of superior metals; yet even we were surprised by the huge leap in performance made possible with Perfect-Surface Technology.PSC+ simply outperforms all previously available copper metals at any price. All of Sydneys conductors are solid. Electrical and magnetic interaction between strands in a conventional cable is the greatest source of distortion, often causing a somewhat dirty, harsh sound. Solid conductors are fundamental toward achieving Sydney’s very clean sound.Polyethylene Air-Tube Insulation :Insulation is necessary to keep the positive and negative conductors separate and to give stability to cable geometry. Insulation is also a dielectric because it is inside the conductors magnetic field. Dielectrics absorb energy, which after a delay is then released in the signal, causing smearing and distortion. Better insulation reduces distortion by absorbing less energy.All of Sydney’s conductors use PE Air-Tube Insulation because air absorbs next to no energy, and Polyethylene is low-loss and has a benign distortion profile. PE Air-Tube Insulation causes much less of the out-of-focus effect common to other materials.Carbon-Based 3-Layer Noise-Dissipation System (NDS) :100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation System. Noise-Dissipation System prevents a significant amount of RFI from reaching the equipment’s ground plane.AudioQuest’s Noise-Dissipation System (NDS) offers a compelling solution to this challenge by using metal-only or alternating layers of metal and carbon-loaded synthetics to effectively “shield the shield,” absorbing and reflecting the Radio Frequency (RF) energy before it reaches the layer attached to the ground.The Sydney ultilises the Carbon-Based 3-Layer Noise-Dissipation System (NDS) to prevent most RFI from reaching the equipment’s ground plane.Double-Balanced Asymmetrical Geometry :Geometry is the physical relationship of the conductors to one another within a cable and determines a cable’s most basic electrical values (capacitance and inductance). Different cable applications have different/specialized geometry requirements, and so these applications do not merely follow a ‘one size fits all’ approach. Better geometry leads to lower levels of distortion.Purpose designed for single-ended applications, Double-Balanced Asymmetrical Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.DirectionalityAudioQuest’s understanding of conductor directionality and its effect on audio performance has steadily evolved, growing stronger and more complete. All audio cables are directional. The correct direction is determined by the arrows on the plugs or cable parts.Cold-Welded Direct-Silver Plated Pure Purple-Copper RCA Plugs :AudioQuest specifies materials and designs each of its own connectors from the ground up, resulting in the long-lasting quality and exceptional performance you deserve. These components are crucial to the overall performance of a cable.To provide the best possible performance for each application, AudioQuest designs each of its connectors from the ground up. These components are crucial to the overall performance of the cable. Painstaking care is taken to evaluate the highest quality materials and design for every application.AudioQuest pays special attention to the plating it uses over its connectors’ carefully crafted base metals. This proprietary, novel plug design allows for a connection devoid of solder, which is a common source of distortion. Because the ground shells are stamped instead of machined, the metal can be chosen for low distortion instead of machine ability. Purple-Copper offers a cleaner, clearer sound than the nickel-plated or OFHC metals commonly found in competing manufacturers plugs.TERMSPlease bid with confidence, the item is exactly as described. We are authorised dealers for all new items that we sell.Guarantees & Warranties: Brand New products are covered by their respective UK and European warranties, details of which are included with the product. Any Used / Repaired / B-Stock items are sold “As Seen” without warranty unless stated otherwise in the listingReturns:Most Buy It Now purchases are protected by the Distance Selling Regulations. To cancel a Contract, you must inform us in writing, and we will provide return instructions. You must return the products to us at your own cost and risk. You will not have any right to cancel a Contract for the supply of products that have been customised for you, such as pre-cut or terminated speaker cables. This provision does not affect your statutory rights. We cannot accept returns for Ex Display / Repaired / B-Stock or items sold by auction unless the item was not as described in the listing. The buyer must contact us within 3 days of receiving the item to initiate a return. The buyer is responsible for return shipping charges.Payment:We ask that payment is made within 3 days.Shipping:All goods purchased are securely and safely packaged for transit. The cost of Packaging materials (e.g. Jiffy Bags, Bubble Wrap etc) is included in the P&P charge. Items will normally be sent within 3 working days of receipt of cleared payment.Stock:Most items are either in stock with us or our suppliers and available for dispatch within 3 days. Occasionally, an item may be awaiting stock and in these instances we will contact you to confirm you are happy to wait for the item. If availability is key for you, we recommend you check an item is in stock before placing your order.Feedback:We always reciprocate feedback. Please contact us through the eBay system if there is a problem.Images:We often use library photos on our auctions for illustrative purposes only – we are not responsible for colour variances or style updates - you will receive the model and specification stated on the auction.All product serial numbers of items sold on eBay are logged for our mutual protection.Thank you for looking at our listing, please do not hesitate to contact us should you have any questions. Please contact us through the eBay system. Regrettably, we only sell within the UK at this time so do not ask us to ship to other destinations

New 1m AudioQuest Sydney RCA Stereo Analogue Interconnect 5 Pin DIN to DINThis listing is for a New 1m AudioQuest Sydney RCA Stereo Analogue Interconnect 5 Pin DIN to DIN. Normally £239Sydneys Perfect-Surface Copper+ has an astonishingly smooth and pure surface. Proprietary metal-processing technology protects the wire’s surface at every stage of drawing and fabrication.Audioquest Sydney DIN to DIN Audio CableSolid Perfect-Surface Copper+ Conductors (PSC+) :Perfect-Surface Copper+ has an astonishingly smooth and pure surface. Proprietary metal-processing technology protects the wire’s surface at every stage of drawing and fabrication. When high-purity low-oxide copper is kept as soft, pure and smooth as possible, it becomes a wonderfully low-distortion PSC+ conductor. PSC+ is manufactured by applying the same exceptional technology to an ultra-pure copper. The resulting sound quality is even more focused and simply less in the way. For over 30 years AudioQuest has pioneered the use of superior metals; yet even we were surprised by the huge leap in performance made possible with Perfect-Surface Technology.PSC+ simply outperforms all previously available copper metals at any price. All of Sydneys conductors are solid. Electrical and magnetic interaction between strands in a conventional cable is the greatest source of distortion, often causing a somewhat dirty, harsh sound. Solid conductors are fundamental toward achieving Sydney’s very clean sound.Polyethylene Air-Tube Insulation :Insulation is necessary to keep the positive and negative conductors separate and to give stability to cable geometry. Insulation is also a dielectric because it is inside the conductors magnetic field. Dielectrics absorb energy, which after a delay is then released in the signal, causing smearing and distortion. Better insulation reduces distortion by absorbing less energy.All of Sydney’s conductors use PE Air-Tube Insulation because air absorbs next to no energy, and Polyethylene is low-loss and has a benign distortion profile. PE Air-Tube Insulation causes much less of the out-of-focus effect common to other materials.Carbon-Based 3-Layer Noise-Dissipation System (NDS) :100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation System. Noise-Dissipation System prevents a significant amount of RFI from reaching the equipment’s ground plane.AudioQuest’s Noise-Dissipation System (NDS) offers a compelling solution to this challenge by using metal-only or alternating layers of metal and carbon-loaded synthetics to effectively “shield the shield,” absorbing and reflecting the Radio Frequency (RF) energy before it reaches the layer attached to the ground.The Sydney ultilises the Carbon-Based 3-Layer Noise-Dissipation System (NDS) to prevent most RFI from reaching the equipment’s ground plane.Double-Balanced Asymmetrical Geometry :Geometry is the physical relationship of the conductors to one another within a cable and determines a cable’s most basic electrical values (capacitance and inductance). Different cable applications have different/specialized geometry requirements, and so these applications do not merely follow a ‘one size fits all’ approach. Better geometry leads to lower levels of distortion.Purpose designed for single-ended applications, Double-Balanced Asymmetrical Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.DirectionalityAudioQuest’s understanding of conductor directionality and its effect on audio performance has steadily evolved, growing stronger and more complete. All audio cables are directional. The correct direction is determined by the arrows on the plugs or cable parts.Cold-Welded Direct-Silver Plated Pure Purple-Copper RCA Plugs :AudioQuest specifies materials and designs each of its own connectors from the ground up, resulting in the long-lasting quality and exceptional performance you deserve. These components are crucial to the overall performance of a cable.To provide the best possible performance for each application, AudioQuest designs each of its connectors from the ground up. These components are crucial to the overall performance of the cable. Painstaking care is taken to evaluate the highest quality materials and design for every application.AudioQuest pays special attention to the plating it uses over its connectors’ carefully crafted base metals. This proprietary, novel plug design allows for a connection devoid of solder, which is a common source of distortion. Because the ground shells are stamped instead of machined, the metal can be chosen for low distortion instead of machine ability. Purple-Copper offers a cleaner, clearer sound than the nickel-plated or OFHC metals commonly found in competing manufacturers plugs.TERMSPlease bid with confidence, the item is exactly as described. We are authorised dealers for all new items that we sell.Guarantees & Warranties: Brand New products are covered by their respective UK and European warranties, details of which are included with the product. Any Used / Repaired / B-Stock items are sold “As Seen” without warranty unless stated otherwise in the listingReturns:Most Buy It Now purchases are protected by the Distance Selling Regulations. To cancel a Contract, you must inform us in writing, and we will provide return instructions. You must return the products to us at your own cost and risk. You will not have any right to cancel a Contract for the supply of products that have been customised for you, such as pre-cut or terminated speaker cables. This provision does not affect your statutory rights. We cannot accept returns for Ex Display / Repaired / B-Stock or items sold by auction unless the item was not as described in the listing. The buyer must contact us within 3 days of receiving the item to initiate a return. The buyer is responsible for return shipping charges.Payment:We ask that payment is made within 3 days.Shipping:All goods purchased are securely and safely packaged for transit. The cost of Packaging materials (e.g. Jiffy Bags, Bubble Wrap etc) is included in the P&P charge. Items will normally be sent within 3 working days of receipt of cleared payment.Stock:Most items are either in stock with us or our suppliers and available for dispatch within 3 days. Occasionally, an item may be awaiting stock and in these instances we will contact you to confirm you are happy to wait for the item. If availability is key for you, we recommend you check an item is in stock before placing your order.Feedback:We always reciprocate feedback. Please contact us through the eBay system if there is a problem.Images:We often use library photos on our auctions for illustrative purposes only – we are not responsible for colour variances or style updates - you will receive the model and specification stated on the auction.All product serial numbers of items sold on eBay are logged for our mutual protection.Thank you for looking at our listing, please do not hesitate to contact us should you have any questions. Please contact us through the eBay system. Regrettably, we only sell within the UK at this time so do not ask us to ship to other destinations

New 1m AudioQuest Sydney RCA Stereo Analogue Interconnect 2 RCA to 2 RCAThis listing is for a New 1m AudioQuest Sydney RCA Stereo Analogue Interconnect 2 RCA to 2 RCA. Normally £239Sydneys Perfect-Surface Copper+ has an astonishingly smooth and pure surface. Proprietary metal-processing technology protects the wire’s surface at every stage of drawing and fabrication.Audioquest Sydney 2 RCA to 2 RCA Audio CableSolid Perfect-Surface Copper+ Conductors (PSC+) :Perfect-Surface Copper+ has an astonishingly smooth and pure surface. Proprietary metal-processing technology protects the wire’s surface at every stage of drawing and fabrication. When high-purity low-oxide copper is kept as soft, pure and smooth as possible, it becomes a wonderfully low-distortion PSC+ conductor. PSC+ is manufactured by applying the same exceptional technology to an ultra-pure copper. The resulting sound quality is even more focused and simply less in the way. For over 30 years AudioQuest has pioneered the use of superior metals; yet even we were surprised by the huge leap in performance made possible with Perfect-Surface Technology.PSC+ simply outperforms all previously available copper metals at any price. All of Sydneys conductors are solid. Electrical and magnetic interaction between strands in a conventional cable is the greatest source of distortion, often causing a somewhat dirty, harsh sound. Solid conductors are fundamental toward achieving Sydney’s very clean sound.Polyethylene Air-Tube Insulation :Insulation is necessary to keep the positive and negative conductors separate and to give stability to cable geometry. Insulation is also a dielectric because it is inside the conductors magnetic field. Dielectrics absorb energy, which after a delay is then released in the signal, causing smearing and distortion. Better insulation reduces distortion by absorbing less energy.All of Sydney’s conductors use PE Air-Tube Insulation because air absorbs next to no energy, and Polyethylene is low-loss and has a benign distortion profile. PE Air-Tube Insulation causes much less of the out-of-focus effect common to other materials.Carbon-Based 3-Layer Noise-Dissipation System (NDS) :100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation System. Noise-Dissipation System prevents a significant amount of RFI from reaching the equipment’s ground plane.AudioQuest’s Noise-Dissipation System (NDS) offers a compelling solution to this challenge by using metal-only or alternating layers of metal and carbon-loaded synthetics to effectively “shield the shield,” absorbing and reflecting the Radio Frequency (RF) energy before it reaches the layer attached to the ground.The Sydney ultilises the Carbon-Based 3-Layer Noise-Dissipation System (NDS) to prevent most RFI from reaching the equipment’s ground plane.Double-Balanced Asymmetrical Geometry :Geometry is the physical relationship of the conductors to one another within a cable and determines a cable’s most basic electrical values (capacitance and inductance). Different cable applications have different/specialized geometry requirements, and so these applications do not merely follow a ‘one size fits all’ approach. Better geometry leads to lower levels of distortion.Purpose designed for single-ended applications, Double-Balanced Asymmetrical Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance.DirectionalityAudioQuest’s understanding of conductor directionality and its effect on audio performance has steadily evolved, growing stronger and more complete. All audio cables are directional. The correct direction is determined by the arrows on the plugs or cable parts.Cold-Welded Direct-Silver Plated Pure Purple-Copper RCA Plugs :AudioQuest specifies materials and designs each of its own connectors from the ground up, resulting in the long-lasting quality and exceptional performance you deserve. These components are crucial to the overall performance of a cable.To provide the best possible performance for each application, AudioQuest designs each of its connectors from the ground up. These components are crucial to the overall performance of the cable. Painstaking care is taken to evaluate the highest quality materials and design for every application.AudioQuest pays special attention to the plating it uses over its connectors’ carefully crafted base metals. This proprietary, novel plug design allows for a connection devoid of solder, which is a common source of distortion. Because the ground shells are stamped instead of machined, the metal can be chosen for low distortion instead of machine ability. Purple-Copper offers a cleaner, clearer sound than the nickel-plated or OFHC metals commonly found in competing manufacturers plugs.TERMSPlease bid with confidence, the item is exactly as described. We are authorised dealers for all new items that we sell.Guarantees & Warranties: Brand New products are covered by their respective UK and European warranties, details of which are included with the product. Any Used / Repaired / B-Stock items are sold “As Seen” without warranty unless stated otherwise in the listingReturns:Most Buy It Now purchases are protected by the Distance Selling Regulations. To cancel a Contract, you must inform us in writing, and we will provide return instructions. You must return the products to us at your own cost and risk. You will not have any right to cancel a Contract for the supply of products that have been customised for you, such as pre-cut or terminated speaker cables. This provision does not affect your statutory rights. We cannot accept returns for Ex Display / Repaired / B-Stock or items sold by auction unless the item was not as described in the listing. The buyer must contact us within 3 days of receiving the item to initiate a return. The buyer is responsible for return shipping charges.Payment:We ask that payment is made within 3 days.Shipping:All goods purchased are securely and safely packaged for transit. The cost of Packaging materials (e.g. Jiffy Bags, Bubble Wrap etc) is included in the P&P charge. Items will normally be sent within 3 working days of receipt of cleared payment.Stock:Most items are either in stock with us or our suppliers and available for dispatch within 3 days. Occasionally, an item may be awaiting stock and in these instances we will contact you to confirm you are happy to wait for the item. If availability is key for you, we recommend you check an item is in stock before placing your order.Feedback:We always reciprocate feedback. Please contact us through the eBay system if there is a problem.Images:We often use library photos on our auctions for illustrative purposes only – we are not responsible for colour variances or style updates - you will receive the model and specification stated on the auction.All product serial numbers of items sold on eBay are logged for our mutual protection.Thank you for looking at our listing, please do not hesitate to contact us should you have any questions. Please contact us through the eBay system. Regrettably, we only sell within the UK at this time so do not ask us to ship to other destinationsOFFERS: We invite offers on most items. Where an item is listed for auction, the starting bid price is usually our minimum price, and we are unlikely to accept offers below this. Responding to the high volume of offers we receive takes a considerable amount of our time, therefore unrealistic low-ball offers will either be ignored or rejected and you will be blocked from making further offers or purchasing from us.

AudioQuest Sydney- RCA to RCA - New - Open Box Authorized Dealer Since 1980 - Factory Warranty Applies 1 Meter Retail Price $249.95 Cable is New. Boxes are rough, torn or otherwise distressed. About AudioQuest Factory Authorized Open Box Products:These items have been opened for one reason or another. Product Condition is New and includes the Audioquest warranty stated below. Most cable and accessory items have their original boxes and packaging. Sometimes boxes may be torn or show wear. Cables that dont have their boxes will come in a sealed plastic bag. Niagara series products will always have their original boxes, packaging and owners manual. AudioQuest Product Warranty for the United States:AudioQuest products are manufactured to exacting standards and are subject to rigorous quality control.However, if a manufacturing defect is found in any cable, connector, or factory assembled product, AudioQuest’s non-transferable original-owner limited lifetime warranty has you covered for any cable, connector, or factory assembled product purchased through an authorized AudioQuest US dealer.At its option, AudioQuest will repair or replace any defective cable, connector, or factory assembled product that has not been abused, for the lifetime of the product. Proof of original purchase is required.For all other products, AudioQuest provides a limited, non-transferable, one-year warranty to original owners who purchased their product through an authorized AudioQuest dealer in the United States. At its option, AudioQuest will repair or replace any defective product that has not been abused, for up to one year from the original date of purchase. Proof of original purchase is required.Cables not terminated by AudioQuest that require service may be returned to AudioQuest with prior authorization and repaired for a fee.This warranty is not an upgrade program for AudioQuest HDMI cables that were designed to meet previous generations of HDMI specifications. Current AudioQuest models are designed to meet HDMI 2.0 (18Gbps) or HDMI 2.1 (48Gbps).All generations of HDMI cable will provide some, but not all, of the features made possible by HDMI 2.0 and 2.1. All generations of HDMI cable are backwards compatible—they provide all the capabilities of previous generations.To experience the audio/video benefits made possible by the latest HDMI 2.1 hardware, an HDMI cable must meet HDMI specifications, specifically an FRL-enabled bandwidth of 48Gbps.This warranty is valid in the United States only. For warranty policies in other countries, please contact your local dealer or distributor.Limitations and ConditionsThis warranty is subject to the following limitations and conditions:The unit will not be covered under the warranty if:• It has been altered or modified in any way.• It has been damaged due to misuse,negligence,accident or improper operation.• It has been subjected to water damage, or extremes of humidity or temperature.• It has been purchased from an unauthorized dealer, or unauthorized repair or service has beenperformed. For repairs and returns:• A request for a Return Merchandise Authorization (RMA) number must be made in writing or via phone to AudioQuest.• A return address and phone number must be included.• Returned product must be accompanied by the RMA number, a written description of the defect orissue, and a photocopy of the original purchase receipt.• Customer is responsible for paying shipping charges to AudioQuest.• If the product is found to be out of warranty, as in the conditions specified above, the customer will begiven the option to pay for the repairs or replacement, or to have the unit returned to them.Limited to original purchaser:• This Warranty is for the sole benefit of the original purchaser and shall not be transferred to a subsequent purchaser of the product. Warranty Outside the USA, Netherlands, Germany or the UKAudioQuest has authorized distributors in many countries of the world. In each country, the authorized distributor or dealer thereof has accepted the responsibility for warranty of products sold in their respective countries. Warranty service should normally be obtained from the authorized distributor or dealer from whom you purchased your product. In the unlikely event of service required beyond the capability of the distributor, AudioQuest will fulfill the conditions of the warranty. Such product must be returned at the owner’s expense to AudioQuest, together with a photocopy of the bill of sale for that product, a detailed description of the problem, and any information necessary for return shipment.AudioQuest makes no other express warranty of any kind whatsoever. All implied warranties, including warranties of merchantability and fitness for a particular purpose, exceeding the specific provisions of this warranty are hereby disclaimed and excluded from this warranty.No representative or other person is authorized to assume for AudioQuest any liability except as stated in this warranty.©2022 AudioQuest SOLID PERFECT-SURFACE COPPER+ (PSC+) CONDUCTORS Solid conductors prevent electrical and magnetic strand-interaction. PSC+ Solid-Copper minimizes distortion caused by grain boundaries and maximizes linear RF Noise-Dissipation. ASYMMETRICAL DOUBLE-BALANCED GEOMETRY Purpose designed for single-ended applications, Asymmetrical Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance. CARBON-BASED 3-LAYER NOISE-DISSIPATION SYSTEM (NDS) Its easy to accomplish 100% shield coverage. Preventing captured Radio Frequency Interference (RFI) from modulating the equipments ground reference requires AQs Noise-Dissipation System (NDS). Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical reference ground plane, which in turn causes a distortion of the signal. NDSs alternating layers of metal and carbon-loaded synthetics shield the shield, absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground. POLYETHYLENE AIR-TUBE INSULATION Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. AudioQuest, however, uses Polyethylene Air-Tube Insulation on both conductors, for increased geometry stabilization and improved clarity. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Polyethylene Air-Tube Insulation, with its high air content, causes much less of the out-of-focus effect common to other materials. COLD-WELDED, DIRECT-SILVER PLATED PURE PURPLE COPPER TERMINATIONS Direct-Silver Plating is optimized for sound, using no underlying layer of distortion-causing nickel, while the highly effective cold-weld process avoids sound-degrading solder.

AudioQuest Sydney- RCA to RCA - New - Open Box Authorized Dealer Since 1980 - Factory Warranty Applies 1 Meter Retail Price $249.95 Cable is New. Boxes are rough, torn or otherwise distressed. About AudioQuest Factory Authorized Open Box Products:These items have been opened for one reason or another. Product Condition is New and includes the Audioquest warranty stated below. Most cable and accessory items have their original boxes and packaging. Sometimes boxes may be torn or show wear. Cables that dont have their boxes will come in a sealed plastic bag. Niagara series products will always have their original boxes, packaging and owners manual. AudioQuest Product Warranty for the United States:AudioQuest products are manufactured to exacting standards and are subject to rigorous quality control.However, if a manufacturing defect is found in any cable, connector, or factory assembled product, AudioQuest’s non-transferable original-owner limited lifetime warranty has you covered for any cable, connector, or factory assembled product purchased through an authorized AudioQuest US dealer.At its option, AudioQuest will repair or replace any defective cable, connector, or factory assembled product that has not been abused, for the lifetime of the product. Proof of original purchase is required.For all other products, AudioQuest provides a limited, non-transferable, one-year warranty to original owners who purchased their product through an authorized AudioQuest dealer in the United States. At its option, AudioQuest will repair or replace any defective product that has not been abused, for up to one year from the original date of purchase. Proof of original purchase is required.Cables not terminated by AudioQuest that require service may be returned to AudioQuest with prior authorization and repaired for a fee.This warranty is not an upgrade program for AudioQuest HDMI cables that were designed to meet previous generations of HDMI specifications. Current AudioQuest models are designed to meet HDMI 2.0 (18Gbps) or HDMI 2.1 (48Gbps).All generations of HDMI cable will provide some, but not all, of the features made possible by HDMI 2.0 and 2.1. All generations of HDMI cable are backwards compatible—they provide all the capabilities of previous generations.To experience the audio/video benefits made possible by the latest HDMI 2.1 hardware, an HDMI cable must meet HDMI specifications, specifically an FRL-enabled bandwidth of 48Gbps.This warranty is valid in the United States only. For warranty policies in other countries, please contact your local dealer or distributor.Limitations and ConditionsThis warranty is subject to the following limitations and conditions:The unit will not be covered under the warranty if:• It has been altered or modified in any way.• It has been damaged due to misuse,negligence,accident or improper operation.• It has been subjected to water damage, or extremes of humidity or temperature.• It has been purchased from an unauthorized dealer, or unauthorized repair or service has beenperformed. For repairs and returns:• A request for a Return Merchandise Authorization (RMA) number must be made in writing or via phone to AudioQuest.• A return address and phone number must be included.• Returned product must be accompanied by the RMA number, a written description of the defect orissue, and a photocopy of the original purchase receipt.• Customer is responsible for paying shipping charges to AudioQuest.• If the product is found to be out of warranty, as in the conditions specified above, the customer will begiven the option to pay for the repairs or replacement, or to have the unit returned to them.Limited to original purchaser:• This Warranty is for the sole benefit of the original purchaser and shall not be transferred to a subsequent purchaser of the product. Warranty Outside the USA, Netherlands, Germany or the UKAudioQuest has authorized distributors in many countries of the world. In each country, the authorized distributor or dealer thereof has accepted the responsibility for warranty of products sold in their respective countries. Warranty service should normally be obtained from the authorized distributor or dealer from whom you purchased your product. In the unlikely event of service required beyond the capability of the distributor, AudioQuest will fulfill the conditions of the warranty. Such product must be returned at the owner’s expense to AudioQuest, together with a photocopy of the bill of sale for that product, a detailed description of the problem, and any information necessary for return shipment.AudioQuest makes no other express warranty of any kind whatsoever. All implied warranties, including warranties of merchantability and fitness for a particular purpose, exceeding the specific provisions of this warranty are hereby disclaimed and excluded from this warranty.No representative or other person is authorized to assume for AudioQuest any liability except as stated in this warranty.©2022 AudioQuest SOLID PERFECT-SURFACE COPPER+ (PSC+) CONDUCTORS Solid conductors prevent electrical and magnetic strand-interaction. PSC+ Solid-Copper minimizes distortion caused by grain boundaries and maximizes linear RF Noise-Dissipation. ASYMMETRICAL DOUBLE-BALANCED GEOMETRY Purpose designed for single-ended applications, Asymmetrical Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance. CARBON-BASED 3-LAYER NOISE-DISSIPATION SYSTEM (NDS) Its easy to accomplish 100% shield coverage. Preventing captured Radio Frequency Interference (RFI) from modulating the equipments ground reference requires AQs Noise-Dissipation System (NDS). Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical reference ground plane, which in turn causes a distortion of the signal. NDSs alternating layers of metal and carbon-loaded synthetics shield the shield, absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground. POLYETHYLENE AIR-TUBE INSULATION Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. AudioQuest, however, uses Polyethylene Air-Tube Insulation on both conductors, for increased geometry stabilization and improved clarity. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Polyethylene Air-Tube Insulation, with its high air content, causes much less of the out-of-focus effect common to other materials. COLD-WELDED, DIRECT-SILVER PLATED PURE PURPLE COPPER TERMINATIONS Direct-Silver Plating is optimized for sound, using no underlying layer of distortion-causing nickel, while the highly effective cold-weld process avoids sound-degrading solder.

AudioQuest Sydney- RCA to RCA - New - Open Box Authorized Dealer Since 1980 - Factory Warranty Applies 1 Meter Cable is New. Boxes are rough, torn or otherwise distressed. About AudioQuest Factory Authorized Open Box Products:These items have been opened for one reason or another. Product Condition is New and includes the Audioquest warranty stated below. Most cable and accessory items have their original boxes and packaging. Sometimes boxes may be torn or show wear. Cables that dont have their boxes will come in a sealed plastic bag. Niagara series products will always have their original boxes, packaging and owners manual. AudioQuest Product Warranty for the United States:AudioQuest products are manufactured to exacting standards and are subject to rigorous quality control.However, if a manufacturing defect is found in any cable, connector, or factory assembled product, AudioQuest’s non-transferable original-owner limited lifetime warranty has you covered for any cable, connector, or factory assembled product purchased through an authorized AudioQuest US dealer.At its option, AudioQuest will repair or replace any defective cable, connector, or factory assembled product that has not been abused, for the lifetime of the product. Proof of original purchase is required.For all other products, AudioQuest provides a limited, non-transferable, one-year warranty to original owners who purchased their product through an authorized AudioQuest dealer in the United States. At its option, AudioQuest will repair or replace any defective product that has not been abused, for up to one year from the original date of purchase. Proof of original purchase is required.Cables not terminated by AudioQuest that require service may be returned to AudioQuest with prior authorization and repaired for a fee.This warranty is not an upgrade program for AudioQuest HDMI cables that were designed to meet previous generations of HDMI specifications. Current AudioQuest models are designed to meet HDMI 2.0 (18Gbps) or HDMI 2.1 (48Gbps).All generations of HDMI cable will provide some, but not all, of the features made possible by HDMI 2.0 and 2.1. All generations of HDMI cable are backwards compatible—they provide all the capabilities of previous generations.To experience the audio/video benefits made possible by the latest HDMI 2.1 hardware, an HDMI cable must meet HDMI specifications, specifically an FRL-enabled bandwidth of 48Gbps.This warranty is valid in the United States only. For warranty policies in other countries, please contact your local dealer or distributor.Limitations and ConditionsThis warranty is subject to the following limitations and conditions:The unit will not be covered under the warranty if:• It has been altered or modified in any way.• It has been damaged due to misuse,negligence,accident or improper operation.• It has been subjected to water damage, or extremes of humidity or temperature.• It has been purchased from an unauthorized dealer, or unauthorized repair or service has beenperformed. For repairs and returns:• A request for a Return Merchandise Authorization (RMA) number must be made in writing or via phone to AudioQuest.• A return address and phone number must be included.• Returned product must be accompanied by the RMA number, a written description of the defect orissue, and a photocopy of the original purchase receipt.• Customer is responsible for paying shipping charges to AudioQuest.• If the product is found to be out of warranty, as in the conditions specified above, the customer will begiven the option to pay for the repairs or replacement, or to have the unit returned to them.Limited to original purchaser:• This Warranty is for the sole benefit of the original purchaser and shall not be transferred to a subsequent purchaser of the product. Warranty Outside the USA, Netherlands, Germany or the UKAudioQuest has authorized distributors in many countries of the world. In each country, the authorized distributor or dealer thereof has accepted the responsibility for warranty of products sold in their respective countries. Warranty service should normally be obtained from the authorized distributor or dealer from whom you purchased your product. In the unlikely event of service required beyond the capability of the distributor, AudioQuest will fulfill the conditions of the warranty. Such product must be returned at the owner’s expense to AudioQuest, together with a photocopy of the bill of sale for that product, a detailed description of the problem, and any information necessary for return shipment.AudioQuest makes no other express warranty of any kind whatsoever. All implied warranties, including warranties of merchantability and fitness for a particular purpose, exceeding the specific provisions of this warranty are hereby disclaimed and excluded from this warranty.No representative or other person is authorized to assume for AudioQuest any liability except as stated in this warranty.©2022 AudioQuest SOLID PERFECT-SURFACE COPPER+ (PSC+) CONDUCTORS Solid conductors prevent electrical and magnetic strand-interaction. PSC+ Solid-Copper minimizes distortion caused by grain boundaries and maximizes linear RF Noise-Dissipation. ASYMMETRICAL DOUBLE-BALANCED GEOMETRY Purpose designed for single-ended applications, Asymmetrical Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance. CARBON-BASED 3-LAYER NOISE-DISSIPATION SYSTEM (NDS) Its easy to accomplish 100% shield coverage. Preventing captured Radio Frequency Interference (RFI) from modulating the equipments ground reference requires AQs Noise-Dissipation System (NDS). Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical reference ground plane, which in turn causes a distortion of the signal. NDSs alternating layers of metal and carbon-loaded synthetics shield the shield, absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground. POLYETHYLENE AIR-TUBE INSULATION Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. AudioQuest, however, uses Polyethylene Air-Tube Insulation on both conductors, for increased geometry stabilization and improved clarity. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Polyethylene Air-Tube Insulation, with its high air content, causes much less of the out-of-focus effect common to other materials. COLD-WELDED, DIRECT-SILVER PLATED PURE PURPLE COPPER TERMINATIONS Direct-Silver Plating is optimized for sound, using no underlying layer of distortion-causing nickel, while the highly effective cold-weld process avoids sound-degrading solder.

Der Kabel ist gebrauch und hat bei den 3.5mm Anschluss eine Verfärbung! Siehe Foto! Länge: 0.6m Neupreis bei Amazon 160 €. Kabel ist fantastisch und man spürt eine Verbesserung der Räumlichkeit und des Basses. In meiner anderen Auktion ist ein Audioquest Yukon RCA zu haben. Bei Fragen bitte melden.

Audioquest Sydney 3.5mm to 3.5mm Jack Cable - 1m - Used Good condition and full working condition. Please feel free to contact me for any other information. (Retail price - £169) Sellers description - Audioquest Sydney 3.5mm to 3.5mm Jack Cable The Sydney Harbour Bridge is the tallest and widest steel-arch bridge in the world, and the fifth longest. The Coathanger (the bridges nickname) is just behind the Sydney Opera House for worldwide recognition as a symbol of Sydney, and as a symbol for all of Australia. An organized Bridge Climb is offered many times a day to the top of the bridge, offering a truly exceptional view of Sydneys amazing harbor from 134 meters (440 ft) above the water. Solid Perfect-Surface Copper+ Conductors (PSC+) :Perfect-Surface Copper+ has an astonishingly smooth and pure surface. Proprietary metal-processing technology protects the wire’s surface at every stage of drawing and fabrication. When high-purity low-oxide copper is kept as soft, pure and smooth as possible, it becomes a wonderfully low-distortion PSC+ conductor. PSC+ is manufactured by applying the same exceptional technology to an ultra-pure copper. The resulting sound quality is even more focused and simply less in the way. For over 30 years AudioQuest has pioneered the use of superior metals; yet even we were surprised by the huge leap in performance made possible with Perfect-Surface Technology. PSC+ simply outperforms all previously available copper metals at any price. All of Sydneys conductors are solid. Electrical and magnetic interaction between strands in a conventional cable is the greatest source of distortion, often causing a somewhat dirty, harsh sound. Solid conductors are fundamental toward achieving Sydney’s very clean sound. Polyethylene Air-Tube Insulation :Insulation is necessary to keep the positive and negative conductors separate and to give stability to cable geometry. Insulation is also a dielectric because it is inside the conductors magnetic field. Dielectrics absorb energy, which after a delay is then released in the signal, causing smearing and distortion. Better insulation reduces distortion by absorbing less energy.All of Sydney’s conductors use PE Air-Tube Insulation because air absorbs next to no energy, and Polyethylene is low-loss and has a benign distortion profile. PE Air-Tube Insulation causes much less of the out-of-focus effect common to other materials. Carbon-Based 3-Layer Noise-Dissipation System (NDS) :100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation System. Noise-Dissipation System prevents a significant amount of RFI from reaching the equipment’s ground plane.AudioQuest’s Noise-Dissipation System (NDS) offers a compelling solution to this challenge by using metal-only or alternating layers of metal and carbon-loaded synthetics to effectively “shield the shield,” absorbing and reflecting the Radio Frequency (RF) energy before it reaches the layer attached to the ground.The Sydney ultilises the Carbon-Based 3-Layer Noise-Dissipation System (NDS) to prevent most RFI from reaching the equipment’s ground plane. Double-Balanced Asymmetrical Geometry :Geometry is the physical relationship of the conductors to one another within a cable and determines a cable’s most basic electrical values (capacitance and inductance). Different cable applications have different/specialized geometry requirements, and so these applications do not merely follow a ‘one size fits all’ approach. Better geometry leads to lower levels of distortion.Purpose designed for single-ended applications, Double-Balanced Asymmetrical Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance. Directionality AudioQuest’s understanding of conductor directionality and its effect on audio performance has steadily evolved, growing stronger and more complete. All audio cables are directional. The correct direction is determined by the arrows on the plugs or cable parts. Cold-Welded Direct-Silver Plated Pure Purple-Copper RCA Plugs :AudioQuest specifies materials and designs each of its own connectors from the ground up, resulting in the long-lasting quality and exceptional performance you deserve. These components are crucial to the overall performance of a cable. To provide the best possible performance for each application, AudioQuest designs each of its connectors from the ground up. These components are crucial to the overall performance of the cable. Painstaking care is taken to evaluate the highest quality materials and design for every application.AudioQuest pays special attention to the plating it uses over its connectors’ carefully crafted base metals. This proprietary, novel plug design allows for a connection devoid of solder, which is a common source of distortion. Because the ground shells are stamped instead of machined, the metal can be chosen for low distortion instead of machine ability. Purple-Copper offers a cleaner, clearer sound than the nickel-plated or OFHC metals commonly found in competing manufacturers plugs. Specification :Geometry: Asymmetrical Double-Balanced (lower impedance on ground, same quality + & - conductors)Metal: Solid Perfect-Surface Copper+ (PSC+) ConductorsDielectric: Polyethylene Air-TubesNoise-Dissipation System (NDS): Carbon-Based 3-Layer Noise-Dissipation SystemRCA Plugs: Cold-Welded Direct-Silver Plated Pure Purple CopperJacket Colour: Dark gray/black braid About AudioQuestAudioQuest aims to deliver the most beautiful, durable, and reliable audio/video cables and accessories on the planet, products that don’t only represent the absolute highest value but also exceed any expectations regarding performance. AudioQuest is a premier provider of high-performance audio video cables and accessories sold in hundreds of outlets in the USA, Europe and in over sixty countries. AudioQuest’s products represent both extraordinary value and exceptional performance.

Gebraucht, in sehr gepflegtem Zustand.- Massives PSC+- Doppelt ausgeglichene asymmetrische Geometrie (niedrigere Impedanz an der Masse, gleiche Qualität der Plus- und Minus-Leiter)- Polyethylen-Air Tubes- Rauschableitung auf Carbonbasis- Geflecht-Ummantelung

AudioQuest Sydney Analog Interconnect 3.5mm Mini-Mini (0.6m) Gently Used. AudioQuest's Sydney mini cables feature Perfect-Surface Copper+ (PSC+) conductors and an insulation system built around Polyethylene Air-Tubes for a marked sonic upgrade over standard mini cables, improved dynamic response, and a truly uplifting listening experience. While theoreticians debate whether the true nature of the universe is analog or digital, one constant in our audiophile galaxy is that the music, dialogue, and sound effects which reach our ears is analog. In order to preserve this precious cargo, AudioQuest has designed a range of analog interconnects optimized for the single-ended world. Sydney takes advantage of years of carefully balancing design and material selection in order to bring you a series of interconnects which, as much as possible, Do No Harm to the original audio signal. Solid Core Conductors Sydney, like virtually all of AQ’s cables, uses solid-core conductors for the analog pathway. Solid-core conductors are more efficient at transmitting small signals than stranded cables and are also vastly lower in distortion, a difference that is clearly audible from the first instant; the system sounds like someone turned up the volume! This efficiency also translates to more music coming through, plug in a Sydney and hear things in your music you’ve never heard before, literally! Perfect Surface Copper + (PSC+) Sydney receives AQ’s best copper, PSC+. A higher grade of copper than PSC, PSC+ receives the same proprietary Perfect Surface polishing process which, as the name implies, smoothes the surface of the conductors. Since treble and midrange frequencies travel very close to the surface in a solid-core conductor, eliminating even microscopic roughness on the surface of the conductor greatly reduces distortion. Sonically, PSC+ is vastly more resolving than PSC, like lifting a sheet off of the speakers, offering greater resolution, greater presence, far more extension top to bottom and far better grip in the lower octaves. For those who value a high level of resolution in their system, PSC+ is the ideal conductor. Carbon-Based 3-Layer Noise-Dissipation System (NDS) 100% shield coverage is easy. Preventing captured RF Interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation System. Metal and Carbon-Loaded synthetics prevent most RFI from reaching the equipment’s ground plane. Polyethylene Air-Tube Insulation Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy (loss). Some of this energy is stored and then released as distortion. All of Victoria’s conductors use PE Air-Tube Insulation because air absorbs next to no energy, and Polyethylene is low-loss and has a benign distortion profile. PE Air-Tube Insulation causes much less of the out-of-focus effect common to other materials. Direct-Silver Plated Pure Purple-Copper RCA Plugs This plug design allows for a connection devoid of solder, which is a common source of distortion. Because the ground shells are stamped instead of machined, the metal can be chosen for low distortion instead of machinability. Purple-Copper offers a cleaner, clearer sound over nickel-plated or OFHC metals commonly found in competing manufacturers' plugs. Direct-Silver Plating offers one more important step toward greater clarity and doing no harm to the signal.

AudioQuest Sydney- RCA to RCA - New - Open Box Authorized Dealer Since 1980 - Factory Warranty Applies 0.6 Meter Retail Price $219.95 Cable is New. Boxes are rough, torn or otherwise distressed. About AudioQuest Factory Authorized Open Box Products:These items have been opened for one reason or another. Product Condition is New and includes the Audioquest warranty stated below. Most cable and accessory items have their original boxes and packaging. Sometimes boxes may be torn or show wear. Cables that dont have their boxes will come in a sealed plastic bag. Niagara series products will always have their original boxes, packaging and owners manual. AudioQuest Product Warranty for the United States:AudioQuest products are manufactured to exacting standards and are subject to rigorous quality control.However, if a manufacturing defect is found in any cable, connector, or factory assembled product, AudioQuest’s non-transferable original-owner limited lifetime warranty has you covered for any cable, connector, or factory assembled product purchased through an authorized AudioQuest US dealer.At its option, AudioQuest will repair or replace any defective cable, connector, or factory assembled product that has not been abused, for the lifetime of the product. Proof of original purchase is required.For all other products, AudioQuest provides a limited, non-transferable, one-year warranty to original owners who purchased their product through an authorized AudioQuest dealer in the United States. At its option, AudioQuest will repair or replace any defective product that has not been abused, for up to one year from the original date of purchase. Proof of original purchase is required.Cables not terminated by AudioQuest that require service may be returned to AudioQuest with prior authorization and repaired for a fee.This warranty is not an upgrade program for AudioQuest HDMI cables that were designed to meet previous generations of HDMI specifications. Current AudioQuest models are designed to meet HDMI 2.0 (18Gbps) or HDMI 2.1 (48Gbps).All generations of HDMI cable will provide some, but not all, of the features made possible by HDMI 2.0 and 2.1. All generations of HDMI cable are backwards compatible—they provide all the capabilities of previous generations.To experience the audio/video benefits made possible by the latest HDMI 2.1 hardware, an HDMI cable must meet HDMI specifications, specifically an FRL-enabled bandwidth of 48Gbps.This warranty is valid in the United States only. For warranty policies in other countries, please contact your local dealer or distributor.Limitations and ConditionsThis warranty is subject to the following limitations and conditions:The unit will not be covered under the warranty if:• It has been altered or modified in any way.• It has been damaged due to misuse,negligence,accident or improper operation.• It has been subjected to water damage, or extremes of humidity or temperature.• It has been purchased from an unauthorized dealer, or unauthorized repair or service has beenperformed. For repairs and returns:• A request for a Return Merchandise Authorization (RMA) number must be made in writing or via phone to AudioQuest.• A return address and phone number must be included.• Returned product must be accompanied by the RMA number, a written description of the defect orissue, and a photocopy of the original purchase receipt.• Customer is responsible for paying shipping charges to AudioQuest.• If the product is found to be out of warranty, as in the conditions specified above, the customer will begiven the option to pay for the repairs or replacement, or to have the unit returned to them.Limited to original purchaser:• This Warranty is for the sole benefit of the original purchaser and shall not be transferred to a subsequent purchaser of the product. Warranty Outside the USA, Netherlands, Germany or the UKAudioQuest has authorized distributors in many countries of the world. In each country, the authorized distributor or dealer thereof has accepted the responsibility for warranty of products sold in their respective countries. Warranty service should normally be obtained from the authorized distributor or dealer from whom you purchased your product. In the unlikely event of service required beyond the capability of the distributor, AudioQuest will fulfill the conditions of the warranty. Such product must be returned at the owner’s expense to AudioQuest, together with a photocopy of the bill of sale for that product, a detailed description of the problem, and any information necessary for return shipment.AudioQuest makes no other express warranty of any kind whatsoever. All implied warranties, including warranties of merchantability and fitness for a particular purpose, exceeding the specific provisions of this warranty are hereby disclaimed and excluded from this warranty.No representative or other person is authorized to assume for AudioQuest any liability except as stated in this warranty.©2022 AudioQuest SOLID PERFECT-SURFACE COPPER+ (PSC+) CONDUCTORS Solid conductors prevent electrical and magnetic strand-interaction. PSC+ Solid-Copper minimizes distortion caused by grain boundaries and maximizes linear RF Noise-Dissipation. ASYMMETRICAL DOUBLE-BALANCED GEOMETRY Purpose designed for single-ended applications, Asymmetrical Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance. CARBON-BASED 3-LAYER NOISE-DISSIPATION SYSTEM (NDS) Its easy to accomplish 100% shield coverage. Preventing captured Radio Frequency Interference (RFI) from modulating the equipments ground reference requires AQs Noise-Dissipation System (NDS). Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical reference ground plane, which in turn causes a distortion of the signal. NDSs alternating layers of metal and carbon-loaded synthetics shield the shield, absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground. POLYETHYLENE AIR-TUBE INSULATION Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. AudioQuest, however, uses Polyethylene Air-Tube Insulation on both conductors, for increased geometry stabilization and improved clarity. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Polyethylene Air-Tube Insulation, with its high air content, causes much less of the out-of-focus effect common to other materials. COLD-WELDED, DIRECT-SILVER PLATED PURE PURPLE COPPER TERMINATIONS Direct-Silver Plating is optimized for sound, using no underlying layer of distortion-causing nickel, while the highly effective cold-weld process avoids sound-degrading solder.

AudioQuest Sydney- RCA to RCA - New - Open Box Authorized Dealer Since 1980 - Factory Warranty Applies 0.6 Meter Cable is New. Boxes are rough, torn or otherwise distressed. About AudioQuest Factory Authorized Open Box Products:These items have been opened for one reason or another. Product Condition is New and includes the Audioquest warranty stated below. Most cable and accessory items have their original boxes and packaging. Sometimes boxes may be torn or show wear. Cables that dont have their boxes will come in a sealed plastic bag. Niagara series products will always have their original boxes, packaging and owners manual. AudioQuest Product Warranty for the United States:AudioQuest products are manufactured to exacting standards and are subject to rigorous quality control.However, if a manufacturing defect is found in any cable, connector, or factory assembled product, AudioQuest’s non-transferable original-owner limited lifetime warranty has you covered for any cable, connector, or factory assembled product purchased through an authorized AudioQuest US dealer.At its option, AudioQuest will repair or replace any defective cable, connector, or factory assembled product that has not been abused, for the lifetime of the product. Proof of original purchase is required.For all other products, AudioQuest provides a limited, non-transferable, one-year warranty to original owners who purchased their product through an authorized AudioQuest dealer in the United States. At its option, AudioQuest will repair or replace any defective product that has not been abused, for up to one year from the original date of purchase. Proof of original purchase is required.Cables not terminated by AudioQuest that require service may be returned to AudioQuest with prior authorization and repaired for a fee.This warranty is not an upgrade program for AudioQuest HDMI cables that were designed to meet previous generations of HDMI specifications. Current AudioQuest models are designed to meet HDMI 2.0 (18Gbps) or HDMI 2.1 (48Gbps).All generations of HDMI cable will provide some, but not all, of the features made possible by HDMI 2.0 and 2.1. All generations of HDMI cable are backwards compatible—they provide all the capabilities of previous generations.To experience the audio/video benefits made possible by the latest HDMI 2.1 hardware, an HDMI cable must meet HDMI specifications, specifically an FRL-enabled bandwidth of 48Gbps.This warranty is valid in the United States only. For warranty policies in other countries, please contact your local dealer or distributor.Limitations and ConditionsThis warranty is subject to the following limitations and conditions:The unit will not be covered under the warranty if:• It has been altered or modified in any way.• It has been damaged due to misuse,negligence,accident or improper operation.• It has been subjected to water damage, or extremes of humidity or temperature.• It has been purchased from an unauthorized dealer, or unauthorized repair or service has beenperformed. For repairs and returns:• A request for a Return Merchandise Authorization (RMA) number must be made in writing or via phone to AudioQuest.• A return address and phone number must be included.• Returned product must be accompanied by the RMA number, a written description of the defect orissue, and a photocopy of the original purchase receipt.• Customer is responsible for paying shipping charges to AudioQuest.• If the product is found to be out of warranty, as in the conditions specified above, the customer will begiven the option to pay for the repairs or replacement, or to have the unit returned to them.Limited to original purchaser:• This Warranty is for the sole benefit of the original purchaser and shall not be transferred to a subsequent purchaser of the product. Warranty Outside the USA, Netherlands, Germany or the UKAudioQuest has authorized distributors in many countries of the world. In each country, the authorized distributor or dealer thereof has accepted the responsibility for warranty of products sold in their respective countries. Warranty service should normally be obtained from the authorized distributor or dealer from whom you purchased your product. In the unlikely event of service required beyond the capability of the distributor, AudioQuest will fulfill the conditions of the warranty. Such product must be returned at the owner’s expense to AudioQuest, together with a photocopy of the bill of sale for that product, a detailed description of the problem, and any information necessary for return shipment.AudioQuest makes no other express warranty of any kind whatsoever. All implied warranties, including warranties of merchantability and fitness for a particular purpose, exceeding the specific provisions of this warranty are hereby disclaimed and excluded from this warranty.No representative or other person is authorized to assume for AudioQuest any liability except as stated in this warranty.©2022 AudioQuest SOLID PERFECT-SURFACE COPPER+ (PSC+) CONDUCTORS Solid conductors prevent electrical and magnetic strand-interaction. PSC+ Solid-Copper minimizes distortion caused by grain boundaries and maximizes linear RF Noise-Dissipation. ASYMMETRICAL DOUBLE-BALANCED GEOMETRY Purpose designed for single-ended applications, Asymmetrical Double-Balanced Geometry offers a relatively lower impedance on the ground for a richer, and more dynamic experience. While many single-ended cable designs use a single path for both the ground and the shield, Double-Balanced designs separate the two for cleaner, quieter performance. CARBON-BASED 3-LAYER NOISE-DISSIPATION SYSTEM (NDS) Its easy to accomplish 100% shield coverage. Preventing captured Radio Frequency Interference (RFI) from modulating the equipments ground reference requires AQs Noise-Dissipation System (NDS). Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical reference ground plane, which in turn causes a distortion of the signal. NDSs alternating layers of metal and carbon-loaded synthetics shield the shield, absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground. POLYETHYLENE AIR-TUBE INSULATION Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation and circuit board materials all absorb energy. Some of this energy is stored and then released as distortion. AudioQuest, however, uses Polyethylene Air-Tube Insulation on both conductors, for increased geometry stabilization and improved clarity. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Polyethylene Air-Tube Insulation, with its high air content, causes much less of the out-of-focus effect common to other materials. COLD-WELDED, DIRECT-SILVER PLATED PURE PURPLE COPPER TERMINATIONS Direct-Silver Plating is optimized for sound, using no underlying layer of distortion-causing nickel, while the highly effective cold-weld process avoids sound-degrading solder.

Powered by Frooition HOME AUDIO VIDEO PORTABLE AUDIO FURNITURE ACCESSORIES Newsletter Contact us AudioQuest Sydney Analog Audio Interconnect 3.5mm Mini to RCA Cable (1.0 meter) AudioQuest Sydney Analog Audio Interconnect 3.5mm Mini to RCA Cable (1.0 meter) Product Information: Brand: AudioQuest Item Number: SYD01MR UPC: 092592062078 Item Condition: New 30 Day Hassle-Free Returns FREE U.S. Shipping 100% Authorized Dealer Expert Tech Support Item Description Analog-Audio Interconnect Cable named after the Sydney Harbour Bridge, which is the tallest and widest steel-arch bridge in the world, and the fifth longest. In all Bridges & Falls, youÕll find better metals and more sophisticated technologies Ñ including Air-Tube insulation, Dielectric-Bias System, and Noise-Dissipation System Ñ at lower prices than ever before. Note: All cables in our Bridges & Falls Series place their left and right channels in a single jacket, and feature our Asymmetrical Double-Balanced geometry with separate high-quality positive and negative conductors. This design allows for a thin, flexible, and uniquely versatile high-performance cable that can be terminated with a variety of todayÕs connections, including 3.5mm (male or female), DIN, and RCA. Do keep in mind, however, that, by necessity, the plugs on Bridges & Falls cables are fairly close together. If the L and R inputs of your components are more than 3_ (7.6cm) apart, please consider models from our Rivers or Elements Series. WARNING: California Residents - Proposition 65. This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov ABOUT SKY BY GRAMOPHONE SKY by Gramophone is the online division of Maryland based retailer Gramophone. Since 1976, Gramophone has been a privately held, family-owned company with more than 85 employees, many of whom have been with the company for over a decade. We offer the highest quality home audio and video equipment, as well as expert design and custom installation services to our many satisfied clients throughout Maryland, Washington D.C., and Virginia. Were very careful about the products we offer and we want them to represent the best value in every price range. We have high standards for quality, performance, and value and are proud to offer products that we would want in our own homes. We stay on top of changes in technology and whats new in the marketplace to make sure we have the best value products in every range. We stand behind every product we carry and want you to love everything you buy from us. Satisfaction guaranteed isnt just a motto to us--its the foundation of our business and the reason our business has endured for over 40 years. PAYMENT INFORMATION Payment is required in full immediately upon winning an auction or selecting Buy It Now on an item. Orders where payment is not received within 24 hours can be cancelled for non-payment and the items may be relisted for sale. SKY by Gramophone accepts all major credit cards through PayPal. PayPal is our exclusive payment option for all purchases through our eBay store. We can only ship to the confirmed US Paypal Address on your account. SHIPPING INFORMATION All orders will ship FREE via 3-5 business day standard shipping. Additional charges will be added when an expedited option is selected. Please verify your shipping address prior to checkout as we are unable to make any changes once checkout is complete. Please note that orders cannot be cancelled once an item has shipped or is in the shipping process. Our returns policy applies to all items once they have entered the shipping process. Most orders are processed by our warehouse within 24-48 hours, excluding weekends and holidays. Please keep in mind that adverse weather conditions, remote delivery locations and carrier delay could cause your actual delivery time to be slightly longer. Our warehouses, shipping carriers and client support offices are closed on major holidays. Most packages will require an adult signature for delivery. You will receive an email confirmation of your order within 24 hours of placing your order and an additional email confirmation with tracking information once your order has been shipped. If you are located in Alaska, Hawaii or a remote area within the U.S., please contact us for product availability and possible freight surcharge pricing. We apologize, but we do not offer international shipping at this time. RETURNS & EXCHANGES SKY by Gramophone guarantees the quality of all items that we sell on Ebay and your satisfaction is very important to us. Please contact us via eBay Messaging regarding any problems before leaving feedback. Any defects, damages, or material differences with your item, must be reported to us within 7 days of receipt. We will gladly accept all items (excluding TVs, furniture, and special orders) for a full refund within 30 days of delivery. Please contact us to arrange a return or exchange. All returns and exchanges will require a Return Authorization (RA) before being shipped to our warehouse. More Items! View more great items! WHY CHOOSE SKY by GRAMOPHONE? Helpful Links Add to Favorite Sellers Sign up to Newsletter View Feedback Contact Seller Visit sellers eBay Shop About Seller Page Powered by Frooition Frooition | No-js Template | eBay design, eBay store design, eBay shop design, eBay template design, eBay listing design (ver:froo_no_js) This listing is currently undergoing maintenance, we apologise for any inconvenience caused.

AudioQuest - Sydney (RCA-to-RCA, 2.0m) An item in excellent, new condition with no wear. The item may be missing the original packaging or protective wrapping, or may be in the original packaging but not sealed.