Audiocraft AC-400 one pivot, oil damping tonearm * perfect working condition. Cable is included as a part of auction. This is long version (12inches) of AC-300C. Specification: An improved tonearm based on the AC-300/AC-400. AC-300C is 35cm type, AC-400C is 40cm type. The one-point support system by the jewel which has a spring suspension is adopted as a rotation bearing part. Furthermore, the oil dump method which applies moderate oil control with an orthodox hemispherical damping material is adopted. As a result, harmful resonance is suppressed and the resonance of the tonearm is low, realizing excellent performance in reproducibility of the low range. Because the one-point support oil dump type tonearm has low mechanical sensitivity, it is considered unsuitable for cartridges designed for high compliance and low stylus pressure. In the AC-300C/AC-400C, this problem is dealt with by installing an oil damping amount adjustment mechanism, and it is possible to switch to the best damping position by adapting to the characteristics of the cartridge to be used and the stylus pressure. This mechanism is a method that allows the gap between the braking ball and the oil cup to be adjusted accurately by refinement of the rotary bearing to vary the damping amount of the oil. For this reason, we have eliminated the drawbacks of conventional oil-dump tonearms, such as adjustment by eye and manual adjustment. The adjustment knob can be continuously changed to 3 positions of Light-Normal-Heavy for each rotation, and the performance of the cartridge to be used can be demonstrated. Also, the damping oil is designed to be easily replaced by removing 3 screws. In addition, the standard specification damping oil has a viscosity unit of 200,000 cs, but as an option, low viscosity (100,000 cs) and high viscosity (300,000 cs) were also available. . The inside force canceller is carried. With the one-point support method, it was said that adding an inside force canceller to maintain lateral balance was difficult, but with the AC-300C/AC-400C, the cancel point is located near the suspension axis and maintains lateral balance over the entire surface of the record. By taking , stable operation is ensured and tracing ability is improved. The lateral balancer adopts the NLB (Neutral Lateral Balance) method incorporated in the rear of the center block. With this method, the built-in weight slides by rotating the left and right small knobs, enabling accurate lateral balance on the arm axis. The amount of slide is lock-to-lock with about 9 turns of the knob, and quick adjustment is possible. In addition, the included sublateral weight allows for a sufficiently wide balance range. In addition, a lateral balance gauge is included, allowing you to monitor the lateral balance more reliably. The head shell is equipped with AS-2Plus of 2 lock pin system as standard equipment. Locking to the tonearm is more secure than the conventional one-pin method, and there is no mounting backlash. In addition, it has a robust structure using a light alloy material with a plate thickness of 2.8 mm, and has high rigidity and sufficiently suppresses resonance. Harmful resonance is removed by integrally molding the finger part. Gold plating is applied to the contacts and lead pins. The double weight mechanism is adopted as the weight assembly. The stylus pressure is precisely adjusted by the linear slide of the main weight and the rotation of the counter ring. The indicated value is a direct reading type with 0 to 3g in 0.25g steps. By adopting this double weight mechanism, the overall length of the weight assembly can be varied from 28 to 34 mm for the AC-300C and from 28 to 39 mm for the AC-400C. Improved operational stability. The arm lifter uses a highly reliable one with a unique structure. The oil dump cylinder has a structure that does not leak oil even after many years of use. In addition, the height of the lifter can be adjusted by rotating the ring on the cylinder head in correspondence with the damping amount adjustment mechanism. All contact points, from the lead pin of the head shell to the pin plug of the output cord, are plated with gold to prevent poor contact due to corrosion or the like. In addition, a low dose type (33pF/m) is used for the output cord, and the plug socket connected to the tonearm is also a new type that guarantees a more reliable contact. A large lock nut with a length of 25 mm is used to attach the tone arm to the monitor board, which is an element that suppresses resonance. There were plenty of option parts. ?? AC-300C AC-400C ?? ????????????????? ?? 333mm 379mm ??? 237mm 283mm ??????? 15mm 13mm ????????????????? 222mm 270mm ????????? 0.21?/cm?? 0.13?/cm?? ????? 85mm 90mm ?????? 0?3g(0.25g????)???? ?????????? 3.5?15g ???????? NLB?? ??????? ????????(????????) ??????????????? ???? Please check business term before bidding on my item /////////////////////////////// NOTE: 1. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

Hallo,hier ein Super Plattenspieler der Fa. Thorens. Das Laufwerk wurde von der Fa. Osawa gekauft und als Hi-Endgerät hochgerüstet. Osawa hatte damals ihren Firmensitz in München. Ich habe das Gerät 1985 gebraucht gekauft. Ein treuer Begleiter bis jetzt. Durch eine neue Ausrichtung des Hörverhaltens ist der Spieler jetzt leider über. Der Tonarm ist ein Audiocraft Ultracraft AC33, damals DM 699,-, mit allem Zubehör (Gewichte, Schrauben, Öl, Anleitung). Das Tonabnehmersystem ist ein Denon DL 110, Highoutput MC-System. Das System wird heute noch produziert und Verkauft UVB € 329,-. Die Orginalverpackung liegt auch dabei. Ein Stabilisierungsystem der Fa. Transrotor, Vakuum, für die LPs ist montiert und wird mit verkauft. Der Neupreis war damals DM 2500,-. Die Plexiglashaube ist nicht kratzerfrei aber ich glaube das ist in diesem Alter vertretbar. Die Haltefedern der Haube sind okay und halten die Haube in jeder Stellung. Die Geschwindigkeitsreglung ist in allen drei 33, 45, 78 UPM okay. Gerne würde ich das Gerät so verkaufen wie es jetzt ist. Nachdem Verkauf wird das Gerät so gut wie möglich verpackt. Ich muss mal schauen ob es zwei Pakete werden oder auch drei. https://www.theanalogdept.com/images/spp6-pics/TT%20manuals/Thorens/TD126%20MkIII.pdfhttps://www.hifi-archiv.info/Thorens/TD126/http://thorens-info.de/html/thorens_td_126.html Viel Spaß beim überlegen und vielleicht Kaufen Das LP-Paket Beatles Colletion gehört nicht zur Auktion (die ist Klasse und selten)

Audiocraft Ac-3000Black Ton Arm GepflegtDas Datenblatt dieses Produkts wurde ursprünglich auf Englisch verfasst. Unten finden Sie eine automatische Übersetzung ins Deutsche. Sollten Sie irgendwelche Fragen haben, kontaktieren Sie uns.ZahlungSeien Sie versichert, dass unser Shop eine Vielzahl von Zahlungsmethoden anbietet.Bitte zahlen Sie innerhalb von 5 Tagen nach Auktionsende.Über unsWir sind in Japan ansässig. Überprüfen Sie bei elektrischen Produkten den Hersteller und das Produkt und rechnen Sie die Spannung in das jeweilige Land um. Wir planen den Versand per FedEx oder DHL. Bitte kontaktieren Sie uns, da sich die Versandkosten in einigen Fällen ändern können. Es ist uns eine Freude, Sie glücklich zu machen, indem wir Ihnen unseren empfohlenen Artikel vorschlagen.Wenn Sie Fragen oder Wünsche zu Artikeln haben, wenden Sie sich bitte an uns.Internationale Käufer – Bitte beachten Sie:-Einfuhrzölle, Steuern und Gebühren sind nicht im Artikelpreis oder den Versandkosten enthalten. Diese Gebühren liegen in der Verantwortung des Käufers.- Bitte erkundigen Sie sich vor dem Bieten/Kauf beim Zollamt Ihres Landes, wie hoch diese zusätzlichen Kosten sein werden.-Diese Gebühren werden normalerweise von der liefernden Spedition (Versandfirma) oder bei der Abholung des Artikels erhoben – verwechseln Sie sie nicht mit zusätzlichen Versandkosten.-Wir kennzeichnen Warenwerte nicht unter dem Wert und kennzeichnen Artikel nicht als Geschenke. Die Vorschriften der US-amerikanischen und internationalen Regierung verbieten ein solches Verhalten.]]>Wir sind in Japan ansässig. Überprüfen Sie bei elektrischen Produkten den Hersteller und das Produkt und rechnen Sie die Spannung in das jeweilige Land um. Wir planen den Versand per FedEx oder DHL. Bitte kontaktieren Sie uns, da sich die Versandkosten in einigen Fällen ändern können. -Einfuhrzölle, Steuern und Gebühren sind nicht im Artikelpreis oder den Versandkosten enthalten. Diese Gebühren liegen in der Verantwortung des Käufers. -Diese Gebühren werden normalerweise von der liefernden Spedition (Versandfirma) oder bei der Abholung des Artikels erhoben – verwechseln Sie sie nicht mit zusätzlichen Versandkosten. -Wir kennzeichnen Warenwerte nicht unter dem Wert und kennzeichnen Artikel nicht als Geschenke. Die Vorschriften der US-amerikanischen und internationalen Regierung verbieten e Capacity NA Item Width NA Compatible Product Line NA Country/Region of Manufacture NA Unit Quantity NA Type NA Brand Audiocraft Plug Regional Fitment NA California Prop 65 Warning NA Item Length NA Year Manufactured NA Unit Type NA Country Japan UPC NA Compatible Model NA Item Weight NA Manufacturer Warranty NA Item Height NA Features NA Color NA Compatible Brand NA MPN NA

Audiocraft Ac-300 Ton QuerlenkerDas Datenblatt dieses Produkts wurde ursprünglich auf Englisch verfasst. Unten finden Sie eine automatische Übersetzung ins Deutsche. Sollten Sie irgendwelche Fragen haben, kontaktieren Sie uns.ZahlungSeien Sie versichert, dass unser Shop eine Vielzahl von Zahlungsmethoden anbietet.Bitte zahlen Sie innerhalb von 5 Tagen nach Auktionsende.Über unsWir sind in Japan ansässig. Überprüfen Sie bei elektrischen Produkten den Hersteller und das Produkt und rechnen Sie die Spannung in das jeweilige Land um. Wir planen den Versand per FedEx oder DHL. Bitte kontaktieren Sie uns, da sich die Versandkosten in einigen Fällen ändern können. Es ist uns eine Freude, Sie glücklich zu machen, indem wir Ihnen unseren empfohlenen Artikel vorschlagen.Wenn Sie Fragen oder Wünsche zu Artikeln haben, wenden Sie sich bitte an uns.Internationale Käufer – Bitte beachten Sie:-Einfuhrzölle, Steuern und Gebühren sind nicht im Artikelpreis oder den Versandkosten enthalten. Diese Gebühren liegen in der Verantwortung des Käufers.- Bitte erkundigen Sie sich vor dem Bieten/Kauf beim Zollamt Ihres Landes, wie hoch diese zusätzlichen Kosten sein werden.-Diese Gebühren werden normalerweise von der liefernden Spedition (Versandfirma) oder bei der Abholung des Artikels erhoben – verwechseln Sie sie nicht mit zusätzlichen Versandkosten.-Wir kennzeichnen Warenwerte nicht unter dem Wert und kennzeichnen Artikel nicht als Geschenke. Die Vorschriften der US-amerikanischen und internationalen Regierung verbieten ein solches Verhalten.]]>Wir sind in Japan ansässig. Überprüfen Sie bei elektrischen Produkten den Hersteller und das Produkt und rechnen Sie die Spannung in das jeweilige Land um. Wir planen den Versand per FedEx oder DHL. Bitte kontaktieren Sie uns, da sich die Versandkosten in einigen Fällen ändern können. -Einfuhrzölle, Steuern und Gebühren sind nicht im Artikelpreis oder den Versandkosten enthalten. Diese Gebühren liegen in der Verantwortung des Käufers. -Diese Gebühren werden normalerweise von der liefernden Spedition (Versandfirma) oder bei der Abholung des Artikels erhoben – verwechseln Sie sie nicht mit zusätzlichen Versandkosten. -Wir kennzeichnen Warenwerte nicht unter dem Wert und kennzeichnen Artikel nicht als Geschenke. Die Vorschriften der US-amerikanischen und internationalen Regierung verbieten e Capacity NA Item Width NA Compatible Product Line NA Country/Region of Manufacture NA Unit Quantity NA Type NA Brand Audiocraft Plug Regional Fitment NA California Prop 65 Warning NA Item Length NA Year Manufactured NA Unit Type NA Country Japan UPC NA Compatible Model NA Item Weight NA Manufacturer Warranty NA Item Height NA Features NA Color NA Compatible Brand NA MPN NA

Up for sale is a Pickering XSV4000 cartridge with an AUDIOCRAFT headshell. This cartridge is compatible with universal turntables and specifically designed for Garrard and Pickering turntables. It is ideal for those who are looking for a high-quality replacement cartridge for their turntable. The AUDIOCRAFT headshell ensures that the cartridge is properly aligned with the tonearm, providing excellent sound quality. This cartridge is perfect for audiophiles who demand the best from their turntable setup. So, if you are looking for a reliable cartridge that delivers exceptional performance, this Pickering XSV4000 cartridge is the perfect choice for you. Very rare SELLING WORLDWIDE WITH TRACKING NUMBER

This staight arm stem was used briefly with my turntable as an alternative tube/pipe with a unique cartridge. I elected to disassemble and store this item more than 20 years ago. It is tested and still works just fine, however I am unable to locate the metal cartridge fitting and screws to properly secure the cartridge. Auction includes only what is pictured, and yes, the manual is included too. This Audiocraft straight tube/pipe is designed for use with the Audiocraft AC-300 MK-II tonearm system. It is a high-quality tonearm that is perfect to upgrade turntables with compatible tonearm systems. The tonearm is made in Japan and comes in a sleek silver/chrome color to complement your turntable setup. The Audiocraft brand is known for producing high-quality audio products, and this tonearm is no exception. Buy with confidence knowing that you are purchasing a top-of-the-line product.

This staight arm stem was used briefly with my turntable as an alternative tube/pipe with a unique cartridge. I elected to disassemble and store this item more than 20 years ago. It is tested and still works just fine, however I am unable to locate the metal cartridge fitting and screws to properly secure the cartridge. Auction includes only what is pictured, and yes, the manual is included too. This Audiocraft straight tube/pipe is designed for use with the Audiocraft AC-300 MK-II tonearm system. It is a high-quality tonearm that is perfect to upgrade turntables with compatible tonearm systems. The tonearm is made in Japan and comes in a sleek silver/chrome color to complement your turntable setup. The Audiocraft brand is known for producing high-quality audio products, and this tonearm is no exception. Buy with confidence knowing that you are purchasing a top-of-the-line product.

This staight arm stem was used briefly with my turntable as an alternative tube/pipe with a unique cartridge. I elected to disassemble and store this item more than 20 years ago. It is tested and still works just fine, however I am unable to locate the metal cartridge fitting and screws to properly secure the cartridge. Auction includes only what is pictured, and yes, the manual is included too. This Audiocraft straight tube/pipe is designed for use with the Audiocraft AC-300 MK-II tonearm system. It is a high-quality tonearm that is perfect to upgrade turntables with compatible tonearm systems. The tonearm is made in Japan and comes in a sleek silver/chrome color to complement your turntable setup. The Audiocraft brand is known for producing high-quality audio products, and this tonearm is no exception. Buy with confidence knowing that you are purchasing a top-of-the-line product.

Up for sale is a SHURE V-15 LT phono cartridge load T4P adpator in Audiocraft Headshell.This type is very rare to find in the market.Stylus looks like newGuaranteed fully functional condition RESISTERED AIR PARCEL POST WORLDWIDE FLAT FOR US$ 20.00 THANKS FOR LOOKING.

Audiocraft AC-4000 MC one pivot, oil damping tonearm with original cable * VG+++ This is long version of AC-3000 tonearm with long armward. Very good working condition. ? Model static balance type one point support viscord dump ? Overall length 390 mm ? Execution length 283 mm ? Overhang 13 mm ? Tracking error 2.5° (maximum) ? Stylus pressure range?0 to 3g in 0.25g steps ? Arm height adjustment? ? Arm base hole? ? Anti-skating device available ? Arm lifter available ? Lateral balancer available ? Line capacity ?Released around 1978 ? Discontinued around 1991-92 Variable damping amount Key lock pin adopted for head shell Adoption of pure copper wire for lead wire Arm pipe replaceable Use of double helicoid arm base /////////////////////////////// NOTE: 1. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

Thank you for looking at the product page Description Please check the picture for the contents of the set. The content of the picture is everything. Please contact me if you have any questions. Shipping *This product will be shipped by Fedex Payment *Buyers have a larger selection of payment options such as credit cards, Apple Pay, Google Pay, and PayPal.* They can also make purchases using locally supported payment methods. International Buyers - Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. If the cancellation is due to the buyer, we will charge a PayPal fee. If there is a remote charge for your address, we will charge you for additional shipping. Thank you for your understanding.

This staight arm stem was used briefly with my turntable as an alternative tube/pipe with a unique cartridge. I elected to disassemble and store this item more than 20 years ago. It is tested and still works just fine, however I am unable to locate the metal cartridge fitting and screws to properly secure the cartridge. Auction includes only what is pictured, and yes, the manual is included too. This Audiocraft straight tube/pipe is designed for use with the Audiocraft AC-300 MK-II tonearm system. It is a high-quality tonearm that is perfect to upgrade turntables with compatible tonearm systems. The tonearm is made in Japan and comes in a sleek silver/chrome color to complement your turntable setup. The Audiocraft brand is known for producing high-quality audio products, and this tonearm is no exception. Buy with confidence knowing that you are purchasing a top-of-the-line product.

This staight arm stem was used briefly with my turntable as an alternative tube/pipe with a unique cartridge. I elected to disassemble and store this item more than 20 years ago. It is tested and still works just fine, however I am unable to locate the metal cartridge fitting and screws to properly secure the cartridge. Auction includes only what is pictured, and yes, the manual is included too. This Audiocraft straight tube/pipe is designed for use with the Audiocraft AC-300 MK-II tonearm system. It is a high-quality tonearm that is perfect to upgrade turntables with compatible tonearm systems. The tonearm is made in Japan and comes in a sleek silver/chrome color to complement your turntable setup. The Audiocraft brand is known for producing high-quality audio products, and this tonearm is no exception. Buy with confidence knowing that you are purchasing a top-of-the-line product.

This staight arm stem was used briefly with my turntable as an alternative tube/pipe with a unique cartridge. I elected to disassemble and store this item more than 20 years ago. It is tested and still works just fine, however I am unable to locate the metal cartridge fitting and screws to properly secure the cartridge. Auction includes only what is pictured, and yes, the manual is included too. This Audiocraft straight tube/pipe is designed for use with the Audiocraft AC-300 MK-II tonearm system. It is a high-quality tonearm that is perfect to upgrade turntables with compatible tonearm systems. The tonearm is made in Japan and comes in a sleek silver/chrome color to complement your turntable setup. The Audiocraft brand is known for producing high-quality audio products, and this tonearm is no exception. Buy with confidence knowing that you are purchasing a top-of-the-line product.

Selling the AC3000 arm in perfect working order, very nice including Carrying case and denon 301 braiding needle, phono cable, (BL-91 not included) if you have any questions please message me Standard shipping is SGlink (provided by eBay), which will take 10-25 business days depending on your location and customization process. If you want it fast, please text me and I will send an invoice

Audiocraft AC-4000 MC one pivot, oil damping tonearm with original cable * VG+++ This is long version of AC-3000 tonearm with long armward. Very good working condition. ? Model static balance type one point support viscord dump ? Overall length 390 mm ? Execution length 283 mm ? Overhang 13 mm ? Tracking error 2.5° (maximum) ? Stylus pressure range?0 to 3g in 0.25g steps ? Arm height adjustment? ? Arm base hole? ? Anti-skating device available ? Arm lifter available ? Lateral balancer available ? Line capacity ?Released around 1978 ? Discontinued around 1991-92 Variable damping amount Key lock pin adopted for head shell Adoption of pure copper wire for lead wire Arm pipe replaceable Use of double helicoid arm base /////////////////////////////// NOTE: 1. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

Audiocraft AC-4000 MC one pivot, oil damping tonearm with original cable * VG+++ This is long version of AC-3000 tonearm with long armward. Very good working condition. ? Model static balance type one point support viscord dump ? Overall length 390 mm ? Execution length 283 mm ? Overhang 13 mm ? Tracking error 2.5° (maximum) ? Stylus pressure range?0 to 3g in 0.25g steps ? Arm height adjustment? ? Arm base hole? ? Anti-skating device available ? Arm lifter available ? Lateral balancer available ? Line capacity ?Released around 1978 ? Discontinued around 1991-92 Variable damping amount Key lock pin adopted for head shell Adoption of pure copper wire for lead wire Arm pipe replaceable Use of double helicoid arm base /////////////////////////////// NOTE: 1. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

100% Authentic! All packages are shipped directly from Japan!Condition DescriptionFeatures and Remarks Series from the brands initial launch Please Note shipping from Japan. Policy PaymentYou can use various payment methods based on eBay Managed Payments. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.Cancellations & ReturnsCancellation or returns will be accepted only if the item has an obvious problem that was not mentioned in the listing description. If that, please let us know within 3 days you got the item. Buyer is responsible for shipping costs and any charge incurred shipping products back.International BuyersImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

100% Authentic! All packages are shipped directly from Japan!Condition DescriptionTone Arm Type Statically Balanced One-Point Support, Viscode Dump Total length 345mm Tone Arm Effective Length 237mm Overhang 15mm Tracking error 0.21?/cm Needle pressure adjustment range 0 to 3g in 0.25g steps Supported cartridges For 3 to 17g dead weight Features and Remarks Phono cable is made by DENON Please Note shipping from Japan. Policy PaymentYou can use various payment methods based on eBay Managed Payments. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.Cancellations & ReturnsCancellation or returns will be accepted only if the item has an obvious problem that was not mentioned in the listing description. If that, please let us know within 3 days you got the item. Buyer is responsible for shipping costs and any charge incurred shipping products back.International BuyersImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

Audiocraft AS-12K headshell in excellent condition Comes with lead Wires and screws See my other items for more turntable parts and accessories I can offer shipping discount on multiple items (friendly custom declaration for all buyers)

Condition DescriptionThere are scratches and threads due to long-term use, but there is no damage that affects the operation during use, and it is a product that is clean and in good condition overall. Please Note shipping from Japan. Policy PaymentWe can shipping only registered address on ebay. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.ShippingI send a product by International Priority(FedEx or UPS) or EMS(Japan Post) . I will determine the required shipping company depending on the situation. I attach the tracking number. Please bid it without worrying. Shipping is only available to the address registered in eBay. Please note that any address not registered in eBay is not acceptable to ship. Shipping is available from Monday to Friday. Weekends are not available because post office is closed.Terms of SaleImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to Unconditional Return Policy Customer service and satisfaction are very important to us. I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition. All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.International BuyersImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

Hallo zusammen, zum Verkauf steht ein sehr schön erhaltener Transrotor Rotary, mit dem Spitzentonarm Audiocraft AC 300 MK II (wechselbares Tonarmrohr) sowie einen Denon DL 103.Das Gerät stammt aus einer Inzahlungnahme, es war nicht komplett, bzw. hatte einen defekten Tonarm, das Netzteil fehlte, und es sah, über die Jahre schrecklich ungepflegt aus.Das Gerät wurde komplett zerlegt, alle Acryl Teile incl. der Haube wurden maschinell poliert. Das Ergebnis ist auf den Bildern gut zu erkennen. Als Tonarm habe ich den AC 300 MK II eingesetzt. Zuvor wurde die Basis des Tonarmes aufgearbeitet, damit ein SME-kompatibler Adapter montierbar war. Das macht die Einstellung des Tonabnehmers besonders einfach. Der Tonarm selber und das montierte DL 103 stammen aus meinem Besitz. (Interessierte Beobachter meiner Auktionen werden mich kennen, ebenso, das immer hochwertige Ersatzteile vorhanden sind.)Der Tonabnehmer ist gebraucht, passt aber besonders gut zu diesem Tonarm.Der Motor wurde frisch, mit einem hochflexiblen Kabel, verkabelt. Die steckbare Verbindung unterhalb des Gerätes wurde weggelassen, da diese Kontaktprobleme hatte. Die Verbindung zu dem neu beschafften Netzteil wurde mit einem entsprechenden Stecker komplettiert. Das Gerät wurde konsequent in die Waage gebracht, und frei schwingend eingestellt.Die Aufstellung des Gerätes erfordert ein gewisses Maß an technischem Verständniß.Der Motor, in seinem Gehäuse kann bei unsachgemäßer Aufstellung am Schwingchassis anstoßen, dann werden Motorgeräusche in die Abtastung übertragen.Vorne links in der Acryl Basis ist eine Bohrung erkennbar. An dieser Stelle läßt sich die Motordose befestigen und hinten auf dem Schwingchassis kann ein 2ter 9-10 Tonarm montiert werden. Ich biete den Service an, dieses Gerät bei Ihnen aufzustellen und auszurichten. (Kostenübernahme durch den Käufer, diesen Service biete ich aber nur im Umkreis von 200Km um Krefeld an, gesonderte Absprachen möglich) Zustand: Gebrauchtes Gerät, mit nur geringsten Spuren des Gebrauchs. Meine Fotos entstehen bei gnadenlosem Tageslicht und ergänzen meine Artikelbeschreibung. ABHOLUNG bevorzugt!!!Versand erfolgt mit DHLPrivatauktion, deshalb Ausschluss von Garantie/Rücknahme/Wandlung/Sachmangelhaftung. Mit der Abgabe Ihres Gebotes erklären Sie sich mit dieser Regelung einverstanden. Sollten Sie der Meinung sein, das Gerät entspräche nicht der Beschreibung, erwarte ich, das Sie zuerst mit mir Kontakt aufnehmen, bevor Sie einen Fall öffnen! Es gibt immer eine Möglichkeit.....Versand: am Folge-Tag des Geldeinganges, kostenfrei bei SofortkaufInternational Bidders please ask for shippingcostAbholung natürlich bevorzugt. Versand aber auch möglich.Es sind auch immer unterschiedliche Tonabnehmer vorrätig, Neu oder Gebraucht. Da wird sich schon was finden, obwohl nicht nötig....Fragen beantworte ich auch gerne Telefonisch (01722365660)Der Preis ist absolut gerechtfertigt, für ein Gerät in diesem Zustand, Punkt. Bei Sofortkauf: Versandkostenfrei!!! Oder Anlieferung im Umkreis von 200 Km gegen AufwandentschädigungPS: die erhöhten Versandkosten resultieren aus dem Beschaffen von passenden Versandmaterial!

Audiocraft AC-4000 MC one pivot, oil damping tonearm with original cable * VG+++ This is long version of AC-3000 tonearm with long armward. Very good working condition. ? Model static balance type one point support viscord dump ? Overall length 390 mm ? Execution length 283 mm ? Overhang 13 mm ? Tracking error 2.5° (maximum) ? Stylus pressure range?0 to 3g in 0.25g steps ? Arm height adjustment? ? Arm base hole? ? Anti-skating device available ? Arm lifter available ? Lateral balancer available ? Line capacity ?Released around 1978 ? Discontinued around 1991-92 Variable damping amount Key lock pin adopted for head shell Adoption of pure copper wire for lead wire Arm pipe replaceable Use of double helicoid arm base /////////////////////////////// NOTE: 1. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

This staight arm stem was used briefly with my turntable as an alternative tube/pipe with a unique cartridge. I elected to disassemble and store this item more than 20 years ago. It is tested and still works just fine, however I am unable to locate the metal cartridge fitting and screws to properly secure the cartridge. Auction includes only what is pictured, and yes, the manual is included too. This Audiocraft straight tube/pipe is designed for use with the Audiocraft AC-300 MK-II tonearm system. It is a high-quality tonearm that is perfect to upgrade turntables with compatible tonearm systems. The tonearm is made in Japan and comes in a sleek silver/chrome color to complement your turntable setup. The Audiocraft brand is known for producing high-quality audio products, and this tonearm is no exception. Buy with confidence knowing that you are purchasing a top-of-the-line product.