Extremely rare sut made in England for highend step up MC cartridge. Wonderful sound. From my highend collection. The AN-S2 is a passive device, designed to convert the mainly current output of your Moving Coil cartridge (MC) to a higher voltage, low current signal of sufficient strength to allow a Moving Magnet (MM) phono stage to amplify it to a suitable level. The internal transformers used in the AN-S2 are manufactured by Audio Note (UK) exclusively, use the very best core materials and winding technology available at the price, and are housed in mumetal screening canisters to minimise noise and interference. The AN-S2 can be supplied in two versions; the AN-S2/L (low impedance) and the AN-S2/H (high impedance). The ‘L’ version has a switchable input impedance of 3 Ohms and 12 Ohms; the ‘H’ version, 15 Ohms and 60 Ohms. The 3 Ohm input of the ‘L’ version has been primarily designed to partner the Audio Note IO Moving Coil cartridges, and the 12 Ohm input is intended to be used with cartridges with an internal impedance of around 3 to 4 Ohms. The 15 Ohm input of the ‘H’ version is designed to partner cartridges with an internal impedance of around 4 to 5 Ohms; the 60 Ohm input is designed for cartridges with internal impedance in the region of 15 to 20 Ohms. It is possible to use our transformers with cartridges that have greater internal impedances, or values that are outside the preferred ranges of the switchable inputs, however, it is important to realise that an input impedance in the region of three to four times the internal impedance of your cartridge will usually provide the best results. Technical Specifications INPUT IMPEDANCE: see text above OUTPUT IMPEDANCE: 47K Ohm CHANNEL BALANCE: +/-0.3dB INTERNAL WIRING: 99.99% pure Copper ? Manual https://www.audionote.co.uk/_files/ugd/3e7c3b_aea1deb56d76436985f1f10a4267044c.pdf

Verkaufe Röhrenvollverstärker Audio Note Jinro / Ausführung Silber / Top-Zustand / Manual / OVP; Gerät stammt aus einem tierlosen Nichtraucherhaushalt und wurde pfleglich behandelt; OVP ist vorhanden, ein transportsicherer Versand ist ohne Probleme möglich; NP = 34.000,-- EUR; Versandkosten innerhalb BRD zu Lasten des Käufers betragen 80,-- EUR. Der Audio Note Jinro ist ein reiner Single-Ended-Röhrenverstärker der Klasse A, der die hoch angesehene 211-Triodenröhre verwendet und ein Leistungsniveau erzeugt, das den meisten aktuellen Designs radikal überlegen ist. Er verwendet das gleiche Schaltungsdesign und die gleiche Topologie wie der legendäre Audio Note ONGAKU-Verstärker. Während der ONGAKU jedoch wo immer möglich Silber verwendet, beispielsweise für alle Transformatorwicklungen, verwendet der JINRO stattdessen Kupfer anstelle von Silber. Spezifikationen: Eingangsimpedanz: 100 kOhm (Leitung) EINGANGSEMPFINDLICHKEIT: 450 mV für volle Leistung MAXIMALE LEISTUNG: 20 Watt RMS pro Kanal an 4 oder 8 Ohm Lasten KANALBALANCE: +/- 0,3 dB VENTILKOMPLETT (LINIE): 2 x 5R4WGB, 2 x 211, 1 x ECC82 / 5814a, 1 x 7044 EINHEITGEWICHT: 38KG VERSANDGEWICHT: 45KG ABMESSUNGEN: 305 mm (H) x 305 mm (B) x 640 mm (T) MAX. STROMVERBRAUCH: 200 Watt Alle von mir bei eBay eingestellten Artikel sind nach bestem Wissen & Gewissen gesichtet und beschrieben worden. Die von mir erkannten Mängel werden in der Artikelbeschreibung benannt. Jedoch erheben sie keinen Anspruch auf Vollständigkeit, die sich gerade bei älteren Artikeln schon aus der Sache heraus ergeben können. Die eingestellten Bilder sind vom Original erstellt worden. Es ist nichts fototechnisch entstellt oder verändert worden. Ich gewähre 12 Monate Gewährleistung Inzahlungnahmen sind möglich. Die MwSt ist nicht ausweisbar (§25 UStG Differenzbesteuerung) Bei weiteren Fragen, einfach Kontakt aufnehmen. Ich bin Fachhändler für diverse Hifi Produkte.

Extremely rare sut made in England for highend step up MC cartridge. Wonderful sound. From my highend collection. The AN-S2 is a passive device, designed to convert the mainly current output of your Moving Coil cartridge (MC) to a higher voltage, low current signal of sufficient strength to allow a Moving Magnet (MM) phono stage to amplify it to a suitable level. The internal transformers used in the AN-S2 are manufactured by Audio Note (UK) exclusively, use the very best core materials and winding technology available at the price, and are housed in mumetal screening canisters to minimise noise and interference. The AN-S2 can be supplied in two versions; the AN-S2/L (low impedance) and the AN-S2/H (high impedance). The ‘L’ version has a switchable input impedance of 3 Ohms and 12 Ohms; the ‘H’ version, 15 Ohms and 60 Ohms. The 3 Ohm input of the ‘L’ version has been primarily designed to partner the Audio Note IO Moving Coil cartridges, and the 12 Ohm input is intended to be used with cartridges with an internal impedance of around 3 to 4 Ohms. The 15 Ohm input of the ‘H’ version is designed to partner cartridges with an internal impedance of around 4 to 5 Ohms; the 60 Ohm input is designed for cartridges with internal impedance in the region of 15 to 20 Ohms. It is possible to use our transformers with cartridges that have greater internal impedances, or values that are outside the preferred ranges of the switchable inputs, however, it is important to realise that an input impedance in the region of three to four times the internal impedance of your cartridge will usually provide the best results. Technical Specifications INPUT IMPEDANCE: see text above OUTPUT IMPEDANCE: 47K Ohm CHANNEL BALANCE: +/-0.3dB INTERNAL WIRING: 99.99% pure Copper ? Manual https://www.audionote.co.uk/_files/ugd/3e7c3b_aea1deb56d76436985f1f10a4267044c.pdf

Extremely rare sut made in England for highend step up MC cartridge. Wonderful sound. From my highend collection. The AN-S2 is a passive device, designed to convert the mainly current output of your Moving Coil cartridge (MC) to a higher voltage, low current signal of sufficient strength to allow a Moving Magnet (MM) phono stage to amplify it to a suitable level. The internal transformers used in the AN-S2 are manufactured by Audio Note (UK) exclusively, use the very best core materials and winding technology available at the price, and are housed in mumetal screening canisters to minimise noise and interference. The AN-S2 can be supplied in two versions; the AN-S2/L (low impedance) and the AN-S2/H (high impedance). The ‘L’ version has a switchable input impedance of 3 Ohms and 12 Ohms; the ‘H’ version, 15 Ohms and 60 Ohms. The 3 Ohm input of the ‘L’ version has been primarily designed to partner the Audio Note IO Moving Coil cartridges, and the 12 Ohm input is intended to be used with cartridges with an internal impedance of around 3 to 4 Ohms. The 15 Ohm input of the ‘H’ version is designed to partner cartridges with an internal impedance of around 4 to 5 Ohms; the 60 Ohm input is designed for cartridges with internal impedance in the region of 15 to 20 Ohms. It is possible to use our transformers with cartridges that have greater internal impedances, or values that are outside the preferred ranges of the switchable inputs, however, it is important to realise that an input impedance in the region of three to four times the internal impedance of your cartridge will usually provide the best results. Technical Specifications INPUT IMPEDANCE: see text above OUTPUT IMPEDANCE: 47K Ohm CHANNEL BALANCE: +/-0.3dB INTERNAL WIRING: 99.99% pure Copper ? Manual https://www.audionote.co.uk/_files/ugd/3e7c3b_aea1deb56d76436985f1f10a4267044c.pdf

Extremely rare sut made in England for highend step up MC cartridge. Wonderful sound. From my highend collection. The AN-S2 is a passive device, designed to convert the mainly current output of your Moving Coil cartridge (MC) to a higher voltage, low current signal of sufficient strength to allow a Moving Magnet (MM) phono stage to amplify it to a suitable level. The internal transformers used in the AN-S2 are manufactured by Audio Note (UK) exclusively, use the very best core materials and winding technology available at the price, and are housed in mumetal screening canisters to minimise noise and interference. The AN-S2 can be supplied in two versions; the AN-S2/L (low impedance) and the AN-S2/H (high impedance). The ‘L’ version has a switchable input impedance of 3 Ohms and 12 Ohms; the ‘H’ version, 15 Ohms and 60 Ohms. The 3 Ohm input of the ‘L’ version has been primarily designed to partner the Audio Note IO Moving Coil cartridges, and the 12 Ohm input is intended to be used with cartridges with an internal impedance of around 3 to 4 Ohms. The 15 Ohm input of the ‘H’ version is designed to partner cartridges with an internal impedance of around 4 to 5 Ohms; the 60 Ohm input is designed for cartridges with internal impedance in the region of 15 to 20 Ohms. It is possible to use our transformers with cartridges that have greater internal impedances, or values that are outside the preferred ranges of the switchable inputs, however, it is important to realise that an input impedance in the region of three to four times the internal impedance of your cartridge will usually provide the best results. Technical Specifications INPUT IMPEDANCE: see text above OUTPUT IMPEDANCE: 47K Ohm CHANNEL BALANCE: +/-0.3dB INTERNAL WIRING: 99.99% pure Copper ? Manual https://www.audionote.co.uk/_files/ugd/3e7c3b_aea1deb56d76436985f1f10a4267044c.pdf

Extremely rare sut made in England for highend step up MC cartridge. Wonderful sound. From my highend collection. The AN-S2 is a passive device, designed to convert the mainly current output of your Moving Coil cartridge (MC) to a higher voltage, low current signal of sufficient strength to allow a Moving Magnet (MM) phono stage to amplify it to a suitable level. The internal transformers used in the AN-S2 are manufactured by Audio Note (UK) exclusively, use the very best core materials and winding technology available at the price, and are housed in mumetal screening canisters to minimise noise and interference. The AN-S2 can be supplied in two versions; the AN-S2/L (low impedance) and the AN-S2/H (high impedance). The ‘L’ version has a switchable input impedance of 3 Ohms and 12 Ohms; the ‘H’ version, 15 Ohms and 60 Ohms. The 3 Ohm input of the ‘L’ version has been primarily designed to partner the Audio Note IO Moving Coil cartridges, and the 12 Ohm input is intended to be used with cartridges with an internal impedance of around 3 to 4 Ohms. The 15 Ohm input of the ‘H’ version is designed to partner cartridges with an internal impedance of around 4 to 5 Ohms; the 60 Ohm input is designed for cartridges with internal impedance in the region of 15 to 20 Ohms. It is possible to use our transformers with cartridges that have greater internal impedances, or values that are outside the preferred ranges of the switchable inputs, however, it is important to realise that an input impedance in the region of three to four times the internal impedance of your cartridge will usually provide the best results. Technical Specifications INPUT IMPEDANCE: see text above OUTPUT IMPEDANCE: 47K Ohm CHANNEL BALANCE: +/-0.3dB INTERNAL WIRING: 99.99% pure Copper ? Manual https://www.audionote.co.uk/_files/ugd/3e7c3b_aea1deb56d76436985f1f10a4267044c.pdf

BLACK GATE CAPACITOR. 10UF 250, STD SERIES AS DUELUND MUNDORF AUDIO NOTE.. COPPIA ,PERFETTAMENTE EFFICENTI.PREGO CONTROLLATE I MIEI FEEDBACK E LE MIE ALTRE INSERZIONI.

Audio Note Japan KONDO NF KSL-LPz Reinsilber 8 Adern - 2x 1,0 Meter inklusive KONDO-Cinch-Steckern - 4.400 Euro Neupreis(laut AN Japan Kondo-Preisliste 2011: für 1-Meter-Paar-Stereo). KSL-LPz Referenz NF-Verbindungskabel Das von KONDO handgefertigte Top-Kabel KSL-LPz mit dem doppelten Leiter-Querschnitt. 36 Litzen aus 99,99%igem Silber x 8 Adern Abschirmkabel mit 0,09 mm Durchmesser, insgesamt 288 Litzen aus reinem Silber pro Kanal. Ohne Gebrauchsspuren, tadelloser Zustand - beim Händler fertig konfektioniert gekauft, wie abgebildet: siehe Fotos. ... Fotos und Beschreibungen der eingestellten Waren zeigen die zu verkaufenden Artikel. Kein Originalkarton, keine Rechnung mehr vorhanden, wird sehr gut verpackt versendet. Es handelt sich um Originalware. ... Ich verkaufe stets mit bestem Wissen und Gewissen. ::: Versand innerhalb Deutschlands: DHL-Paket 7,00 Euro, 7 Werktage.......Weiterer internationaler DHL-Versand auf Anfrage!...Hinweise:Ich habe 20 km Anfahrt zu der nächstmöglichen Postfiliale - berechne trotzdem lediglich den Schalterpreis für ein versichertes DHL-Paket: 7,00 Euro.Das ist auch der Grund meiner Bearbeitungszeit von 7 Werktagen -> ALLERDINGS VERSUCHE ICH DIESE AUF MAX. 5 WERKTAGE ZU BESCHRÄNKEN!Privatverkauf: keine Garantie, keine Gewährleistung, keine Rücknahme, keine Erstattung, keine Teilerstattung, keine Verantwortung für Transportschäden.Der Markenname ist Eigentum des Rechteinhabers: wird hier nur verwendet, weil er Bestandteil des Produktes ist und die Qualität kennzeichnet.

Extremely rare sut made in England for highend step up MC cartridge. Wonderful sound. From my highend collection. The AN-S2 is a passive device, designed to convert the mainly current output of your Moving Coil cartridge (MC) to a higher voltage, low current signal of sufficient strength to allow a Moving Magnet (MM) phono stage to amplify it to a suitable level. The internal transformers used in the AN-S2 are manufactured by Audio Note (UK) exclusively, use the very best core materials and winding technology available at the price, and are housed in mumetal screening canisters to minimise noise and interference. The AN-S2 can be supplied in two versions; the AN-S2/L (low impedance) and the AN-S2/H (high impedance). The ‘L’ version has a switchable input impedance of 3 Ohms and 12 Ohms; the ‘H’ version, 15 Ohms and 60 Ohms. The 3 Ohm input of the ‘L’ version has been primarily designed to partner the Audio Note IO Moving Coil cartridges, and the 12 Ohm input is intended to be used with cartridges with an internal impedance of around 3 to 4 Ohms. The 15 Ohm input of the ‘H’ version is designed to partner cartridges with an internal impedance of around 4 to 5 Ohms; the 60 Ohm input is designed for cartridges with internal impedance in the region of 15 to 20 Ohms. It is possible to use our transformers with cartridges that have greater internal impedances, or values that are outside the preferred ranges of the switchable inputs, however, it is important to realise that an input impedance in the region of three to four times the internal impedance of your cartridge will usually provide the best results. Technical Specifications INPUT IMPEDANCE: see text above OUTPUT IMPEDANCE: 47K Ohm CHANNEL BALANCE: +/-0.3dB INTERNAL WIRING: 99.99% pure Copper ? Manual https://www.audionote.co.uk/_files/ugd/3e7c3b_aea1deb56d76436985f1f10a4267044c.pdf

Pre Owned Untested* Our delivery speed (Business days) is much faster than eBay estimated date.*------------------------------------------[ You will receive ]: As pictured and as described in title. [ Physical Condition ]: Untested. See all pictures please. [ Working Condition ]: Untested [ Warranty (days )]: Used and new items (30 days), the rest (No warranty). [ Attention please ]: Read title and item description carefully please, and check all pictures before your purchase. Some information in item specifics may be added automatically by eBay, there is no guarantee those are correct. ---------------------------------------------((( Shipping ))) Parcel: USA (1-7 days)Economy shipping (Letter mail) : USA (4-12 days) Delivery speed may vary for reasons (customs, distance, holiday, etc.), and we keep the right to change shipping options and couriers. Inv# 2 ((( Payment )))PayPal preferred, more options accepted. Please send timely payment, otherwise eBay will send an unpaid strike automatically. Please contact us (please do not make payment before our reponse) for any service exceptions or address changes, otherwise buyers must pay any loss, shipping charge and fees.

Audio Note AN-S2 H MC Step Up Klingt sehr neutral und warm. Absolut Rausch und Brummfrei. Die H-Version des Audio Note AN-S2 ist zwischen Eingangsimpedanzen von 15 Ohm und 60 Ohm umschaltbar. Der 15 Ohm Eingang der H-Version ist für MC Tonabnehmer mit einer internen Impedanz von etwa 4 bis 5 Ohm ausgelegt. Der 60 Ohm Eingang ist für MC Tonabnehmer mit einer internen Impedanz im Bereich von 15 bis 20 Ohm ausgelegt. Optisch ist AN sehr schön erhalten, es sind nur minimale Gebrauchsspuren zu finden. Eingangsimpedanz AN-S2 H: 15 Ohm, 60 Ohm (schaltbar) Ausgangsimpedanz: 47 kOhm Kanalgleichheit: +/- 0,3 dB Gain: 35dB verwendetes Drahtmaterial: 99,99% reines Kupfer Schneller Versand oder Abholung in Hamburg 22765 möglich. ++++ Tier - und Nikotinfreier Haushalt ++++ Privatverkauf, keine Rücknahme. Bezahlung per PayPal, Überweisung oder bar bei Abholung. Sending Worldwide, pleas ask for the price.

Audio Note Japan KONDO NF KSL-LPz Reinsilber 8 Adern - 2x 0,5 Meter inklusive KONDO-Cinch-Steckern - 2.200 Euro Neupreis.(4.400 Euro NP laut AN Japan Kondo-Preisliste 2011: für 1-Meter-Paar-Stereo). KSL-LPz Referenz NF-Verbindungskabel Das von KONDO handgefertigte Top-Kabel KSL-LPz mit dem doppelten Leiter-Querschnitt. 36 Litzen aus 99,99%igem Silber x 8 Adern Abschirmkabel mit 0,09 mm Durchmesser, insgesamt 288 Litzen aus reinem Silber pro Kanal. Ohne Gebrauchsspuren, tadelloser Zustand - beim Händler fertig konfektioniert gekauft, wie abgebildet: siehe Fotos. ... Fotos und Beschreibungen der eingestellten Waren zeigen die zu verkaufenden Artikel. Kein Originalkarton, keine Rechnung mehr vorhanden, wird sehr gut verpackt versendet. Es handelt sich um Originalware. ... Ich verkaufe stets mit bestem Wissen und Gewissen. ... Versand innerhalb Deutschlands: DHL-Paket 7 Euro.Internationaler DHL-Versand auch Anfrage!... Hinweise:Ich habe 20 km Anfahrt zu der nächstmöglichen Postfiliale - berechne trotzdem lediglich den Schalterpreis für ein versichertes DHL-Paket: 7,00 Euro.Das ist auch der Grund meiner Bearbeitungszeit von 7 Werktagen -> ALLERDINGS VERSUCHE ICH DIESE AUF MAX. 5 WERKTAGE ZU BESCHRÄNKEN! Privatverkauf: keine Garantie, keine Gewährleistung, keine Rücknahme, keine Erstattung, keine Teilerstattung, keine Verantwortung für Transportschäden. Der Markenname ist Eigentum des Rechteinhabers: wird hier nur verwendet, weil er Bestandteil des Produktes ist und die Qualität kennzeichnet.

Extremely rare sut made in England for highend step up MC cartridge. Wonderful sound. From my highend collection. The AN-S2 is a passive device, designed to convert the mainly current output of your Moving Coil cartridge (MC) to a higher voltage, low current signal of sufficient strength to allow a Moving Magnet (MM) phono stage to amplify it to a suitable level. The internal transformers used in the AN-S2 are manufactured by Audio Note (UK) exclusively, use the very best core materials and winding technology available at the price, and are housed in mumetal screening canisters to minimise noise and interference. The AN-S2 can be supplied in two versions; the AN-S2/L (low impedance) and the AN-S2/H (high impedance). The ‘L’ version has a switchable input impedance of 3 Ohms and 12 Ohms; the ‘H’ version, 15 Ohms and 60 Ohms. The 3 Ohm input of the ‘L’ version has been primarily designed to partner the Audio Note IO Moving Coil cartridges, and the 12 Ohm input is intended to be used with cartridges with an internal impedance of around 3 to 4 Ohms. The 15 Ohm input of the ‘H’ version is designed to partner cartridges with an internal impedance of around 4 to 5 Ohms; the 60 Ohm input is designed for cartridges with internal impedance in the region of 15 to 20 Ohms. It is possible to use our transformers with cartridges that have greater internal impedances, or values that are outside the preferred ranges of the switchable inputs, however, it is important to realise that an input impedance in the region of three to four times the internal impedance of your cartridge will usually provide the best results. Technical Specifications INPUT IMPEDANCE: see text above OUTPUT IMPEDANCE: 47K Ohm CHANNEL BALANCE: +/-0.3dB INTERNAL WIRING: 99.99% pure Copper ? Manual https://www.audionote.co.uk/_files/ugd/3e7c3b_aea1deb56d76436985f1f10a4267044c.pdf

Audio Note Japan early AN B yellow Speaker Cables, 2 x 3m stereo pair.The item pictured is the actual item for sale.

Extremely rare sut made in England for highend step up MC cartridge. Wonderful sound. From my highend collection. The AN-S2 is a passive device, designed to convert the mainly current output of your Moving Coil cartridge (MC) to a higher voltage, low current signal of sufficient strength to allow a Moving Magnet (MM) phono stage to amplify it to a suitable level. The internal transformers used in the AN-S2 are manufactured by Audio Note (UK) exclusively, use the very best core materials and winding technology available at the price, and are housed in mumetal screening canisters to minimise noise and interference. The AN-S2 can be supplied in two versions; the AN-S2/L (low impedance) and the AN-S2/H (high impedance). The ‘L’ version has a switchable input impedance of 3 Ohms and 12 Ohms; the ‘H’ version, 15 Ohms and 60 Ohms. The 3 Ohm input of the ‘L’ version has been primarily designed to partner the Audio Note IO Moving Coil cartridges, and the 12 Ohm input is intended to be used with cartridges with an internal impedance of around 3 to 4 Ohms. The 15 Ohm input of the ‘H’ version is designed to partner cartridges with an internal impedance of around 4 to 5 Ohms; the 60 Ohm input is designed for cartridges with internal impedance in the region of 15 to 20 Ohms. It is possible to use our transformers with cartridges that have greater internal impedances, or values that are outside the preferred ranges of the switchable inputs, however, it is important to realise that an input impedance in the region of three to four times the internal impedance of your cartridge will usually provide the best results. Technical Specifications INPUT IMPEDANCE: see text above OUTPUT IMPEDANCE: 47K Ohm CHANNEL BALANCE: +/-0.3dB INTERNAL WIRING: 99.99% pure Copper ? Manual https://www.audionote.co.uk/_files/ugd/3e7c3b_aea1deb56d76436985f1f10a4267044c.pdf

JUMPER cable in Jampers : Audio Note Lexus 96 , Original cable . Speaker Cable Jumper with Y-Spade to Y-Spade Connectors total length 20 cm; Spade-Spade

ANK kits (Audio Note) L2 Phono(MM) Preamp, 240Volt, built 2018. 3x line inputs and one MM Phono input. Built in 2018 with many Audio Note upgrades incorporated during the build, (see below).The Preamp gives out a lot of gain, so I’m including the Rothwell attenuators that I’ve been using between the preamp and power amp. Without them there is a hum from the excessive gain. Valve used (Current type supplied in brackets)Power board: ECL82 (Russian) and 6X5 (RCA)Line stage: Two x 12AU7 (Electro Harmonix)Phono Board: 12AX7 (Electro Harmonix) and 6922 (JJ) Updgrades on the Phono and Line stageAudio Note Tantalum ResistorsAudio Note Copper CapsAudio Note Kaisei Electrolytic CapacitorsSilver Mica capacitors Updgrades on Power boardAudio Note Tin Foil CapacitorAudio Note Standard Capacitor x1 Other upgradesAudio Note AN-A wire, (the yellow one, through-out see photos)Audio Note volume potAudio Note Power Transformer and Choke from HiFi collectiveAudio Note RCA silver terminalsUnderside on Line and Phono boards hardwired with silver wire, see construction picture Reason for sale: I was having problems with my power amp and had listened to several AN power amps in conjunction with this preamp. I also listened to an AN integrated amp and decided to change direction and buy that, although it was double my budget.So this preamp has been resting for the last couple of years. Collection in person would be preferred, so you can hear it, albeit with a SS power amp. Otherwise UK only by UPS courier.

used for about 2 years in my CD

------------------------------------------------------- Information in: English see below ------------------------------------------------------- High End CHINCH / RCA KABEL2 Stück / Paar für Stereo - Länge je 7,5 Meter PHONO CABLE with RCA PLUGS AUDIO NOTEMUSICs FINEST CONDUCTORAN - V AUDIO NOTEAN-V SYMMETRICAL 99,99% PURE SILVER COAXIAL INTERCONNECT CABLE 2-mal 7,5 Meter High End Mono Chinchkabel.Reinsilberkabel mit original Audio Note Chinch / RCA Steckern an den Kabelenden. Das ursprüngliche 7,5 Meter Stereokabel wurde in 2 Mono-Kabel geteilt da es als Verbindungkabel von einem Audio Note M3 Vorverstärker zu zwei separat aufgestellten Audio Note Conquest Mono-Endstufen genutzt wurde. Der Neupreis pro Meter als Stereo-Kabel lag bei ca. 400,- € Aufdruck am Kabel: An Audio Note AN-V 99.99 % PURE SILVER COAXIAL INTERCONNECT CABLE--- RIGHT CHANNEL--- LEFT CHANNEL Technischer & optischer Zustand: Gebrauchtes NF-Kabel aus Nichtraucher Haushalt.Oberflächlich mit leichten Gebrauchsspuren,technisch in einwandfreien Zustand - keine Knicke, keine Verletzungen der Isolierung.Ausführung und Lieferumfang siehe auch Fotos. Alle Bilder sind Originalfotos der angebotenen Kabel. All pictures are original photos. Versand / Abholung: Versand erfolgt gut und sicher verpackt als versicherte Sendung. Selbstverständlich ist auch Abholung möglich. Kontaktdaten sowie Anschrift bzw. Abholadresse siehe unter: Rechtliche Informationen des Verkäufers. Habe noch weitere sehr interessante Artikel hier auf eBay, bitte klicken Sie oben rechts bei den Angaben zum Verkäufer auf: Andere Artikel aufrufen Danke für Ihr Interesse an diesem Angebot. ------------------------------------------------------------------------------- 24 ft HIGH END RCA CABLE AUDIO NOTE AN-V Audio Note AN V 99,99% pure silver symmetrical coaxial interconnect cablewith Audio Note RCA plugs. The original 24,5ft stereo cable was divided into 2 mono cables as it was used as a connection cable from an Audio Note M3 preamplifier to two separately positioned Audio Note Conquest valve power amplifiers. Cable lenght: ca. 7,5 m ( ? 24,5 ft ) each.Optical condition and scope of delivery, see original images. All pictures are original photos of the offered cables Item will be well packed for shippingThanks for looking--------------------

Extremely rare sut made in England for highend step up MC cartridge. Wonderful sound. From my highend collection. The AN-S2 is a passive device, designed to convert the mainly current output of your Moving Coil cartridge (MC) to a higher voltage, low current signal of sufficient strength to allow a Moving Magnet (MM) phono stage to amplify it to a suitable level. The internal transformers used in the AN-S2 are manufactured by Audio Note (UK) exclusively, use the very best core materials and winding technology available at the price, and are housed in mumetal screening canisters to minimise noise and interference. The AN-S2 can be supplied in two versions; the AN-S2/L (low impedance) and the AN-S2/H (high impedance). The ‘L’ version has a switchable input impedance of 3 Ohms and 12 Ohms; the ‘H’ version, 15 Ohms and 60 Ohms. The 3 Ohm input of the ‘L’ version has been primarily designed to partner the Audio Note IO Moving Coil cartridges, and the 12 Ohm input is intended to be used with cartridges with an internal impedance of around 3 to 4 Ohms. The 15 Ohm input of the ‘H’ version is designed to partner cartridges with an internal impedance of around 4 to 5 Ohms; the 60 Ohm input is designed for cartridges with internal impedance in the region of 15 to 20 Ohms. It is possible to use our transformers with cartridges that have greater internal impedances, or values that are outside the preferred ranges of the switchable inputs, however, it is important to realise that an input impedance in the region of three to four times the internal impedance of your cartridge will usually provide the best results. Technical Specifications INPUT IMPEDANCE: see text above OUTPUT IMPEDANCE: 47K Ohm CHANNEL BALANCE: +/-0.3dB INTERNAL WIRING: 99.99% pure Copper ? Manual https://www.audionote.co.uk/_files/ugd/3e7c3b_aea1deb56d76436985f1f10a4267044c.pdf

Extremely rare sut made in England for highend step up MC cartridge. Wonderful sound. From my highend collection. The AN-S2 is a passive device, designed to convert the mainly current output of your Moving Coil cartridge (MC) to a higher voltage, low current signal of sufficient strength to allow a Moving Magnet (MM) phono stage to amplify it to a suitable level. The internal transformers used in the AN-S2 are manufactured by Audio Note (UK) exclusively, use the very best core materials and winding technology available at the price, and are housed in mumetal screening canisters to minimise noise and interference. The AN-S2 can be supplied in two versions; the AN-S2/L (low impedance) and the AN-S2/H (high impedance). The ‘L’ version has a switchable input impedance of 3 Ohms and 12 Ohms; the ‘H’ version, 15 Ohms and 60 Ohms. The 3 Ohm input of the ‘L’ version has been primarily designed to partner the Audio Note IO Moving Coil cartridges, and the 12 Ohm input is intended to be used with cartridges with an internal impedance of around 3 to 4 Ohms. The 15 Ohm input of the ‘H’ version is designed to partner cartridges with an internal impedance of around 4 to 5 Ohms; the 60 Ohm input is designed for cartridges with internal impedance in the region of 15 to 20 Ohms. It is possible to use our transformers with cartridges that have greater internal impedances, or values that are outside the preferred ranges of the switchable inputs, however, it is important to realise that an input impedance in the region of three to four times the internal impedance of your cartridge will usually provide the best results. Technical Specifications INPUT IMPEDANCE: see text above OUTPUT IMPEDANCE: 47K Ohm CHANNEL BALANCE: +/-0.3dB INTERNAL WIRING: 99.99% pure Copper ? Manual https://www.audionote.co.uk/_files/ugd/3e7c3b_aea1deb56d76436985f1f10a4267044c.pdf

Extremely rare sut made in England for highend step up MC cartridge. Wonderful sound. From my highend collection. The AN-S2 is a passive device, designed to convert the mainly current output of your Moving Coil cartridge (MC) to a higher voltage, low current signal of sufficient strength to allow a Moving Magnet (MM) phono stage to amplify it to a suitable level. The internal transformers used in the AN-S2 are manufactured by Audio Note (UK) exclusively, use the very best core materials and winding technology available at the price, and are housed in mumetal screening canisters to minimise noise and interference. The AN-S2 can be supplied in two versions; the AN-S2/L (low impedance) and the AN-S2/H (high impedance). The ‘L’ version has a switchable input impedance of 3 Ohms and 12 Ohms; the ‘H’ version, 15 Ohms and 60 Ohms. The 3 Ohm input of the ‘L’ version has been primarily designed to partner the Audio Note IO Moving Coil cartridges, and the 12 Ohm input is intended to be used with cartridges with an internal impedance of around 3 to 4 Ohms. The 15 Ohm input of the ‘H’ version is designed to partner cartridges with an internal impedance of around 4 to 5 Ohms; the 60 Ohm input is designed for cartridges with internal impedance in the region of 15 to 20 Ohms. It is possible to use our transformers with cartridges that have greater internal impedances, or values that are outside the preferred ranges of the switchable inputs, however, it is important to realise that an input impedance in the region of three to four times the internal impedance of your cartridge will usually provide the best results. Technical Specifications INPUT IMPEDANCE: see text above OUTPUT IMPEDANCE: 47K Ohm CHANNEL BALANCE: +/-0.3dB INTERNAL WIRING: 99.99% pure Copper ? Manual https://www.audionote.co.uk/_files/ugd/3e7c3b_aea1deb56d76436985f1f10a4267044c.pdf

Audio Note AX-Two stand-mount speakers in White Ash finish. Excellent condition. Supplied in the original packaging (no grills supplied).Can bi-wire/amp them - links are in place if not. Work best close to rear walls or corners.Stands NOT included. I have upgraded to Devore O/Baby. New cost is £2850 now. ** Note - Im away now, back Wednesday 20th Sept. First day to ship. For a good review of these, please google Stereonet / AX-Two Standmount. THE VERDICTThe AX-Two may be small, but it has a surprisingly large sound that propagates well to deliver a real sense of presence. It can also deftly convey the dynamics and instrumental layers of a recording and ensure that it all keeps moving with great rhythmic integrity. Its inherent quality is such that it can be used with any high-quality amplifier.

You are bidding on a pair of Audio Note AX2 Bookshelf Speakers in used, fully functional, original condition. Please inspect the photos carefully to understand their cosmetic condition - it isnt perfect yet good for their age. International buyers are welcome but please ask for a shipping quote before you bid. If you intent to use forwarding company please let me know upfront. The international postage will comply to the eBays rules and will include insurance. The international buyer accepts the responsibility for custom duties and other expenses caused by the respective countries regulations. The price on the paperwork will be the selling price plus postage and insurance. The speakers will be send well packed in tick, double wall boxes and wrapped in shockproof bubble wrap paper. Those are extremely musical, easy to drive, neutral to warm speakers using dedicated Scanspec drivers sporting a very simple yet efficient crossover. Specs 6 ohms89dB. 100W RMS55Hz to 23kHz. No reserve, happy bidding.