Pr Audax HM210AZ) 8 Woofers, 6 ohms, quality made and designed in France. They have cast frames, rubber surrounds, excellent quality and design. They were never used, open box, always in a climate controlled non smoking environment, very nice working tested condition. See the impressive specs and description below. The shipping cost includes safe packing, insurance, prompt shipping and tracking number. Buy with confidence, see my feedback. Good listening, SonnY :) The Audax HM210Z0 loudspeaker is a bass/midrange with airgel cone and molded Zamack bowl. This 8-inch high-fidelity loudspeaker is ideal for making 2-way speakers, with for example an Audax TW025A20Mg tweeter or a SEAS T25CF002 above. The HD-A (High Definition Airgel) cone is a real technological breakthrough in this field, surpassing the materials known to date. Through an extraordinary combination of a new material and an original process, Audax has created a composite cone, an innovation whose properties are close to ideal for a direct radiation transducer. Ultra light, extremely rigid and perfectly damped, this uncompromising cone is made of a controlled matrix of acrylic polymer gel enveloping ideally ordered Carbon and Kevlar fibres. An exclusive Audax process allows optimized alignment of the fibers in the polymer chain. The process provides full control of the profile and weight of the cone, while offering the ability to vary the thickness at each location. This 210 mm bass/midrange driver is intended for the design of prestigious 2 or 3-way loudspeakers. It is notably equipped with a molded Zamack chassis with ventilated under the spider to promote the best transient response and a non-resonant warhead to linearize the response at the top of the spectrum. Its good power handling results from the use of a coil on a Kapton support reinforced with glass fiber in flat copper wire on edge. The gold-plated connector allows excellent solderability. The Suggested applications table indicates different types of load (to build your loudspeaker) including the one used for measuring the response curve (Vb REF). The published curves correspond to the bass response for a given volume (Vb) and vent size (Dp-Lp). 2 or 3 way speakers of prestige. It is notably equipped with a molded Zamack chassis with ventilated under the spider to promote the best transient response and a non-resonant warhead to linearize the response at the top of the spectrum. Shielded 8 HDA cone driver High impact polymer chassis HDA (High Definition Aerogel) cone Fully shielded magnet system for audio video application Non resonant high impact polymer chassis High loss rubber surround Built in cosmetic ring designed for front-rear and recessed mounting High temperature voice coil-4 layers Aluminium former General Product type Cone driver Brand Audax Reference AP210Z0 Informations Nominal impedance 6 ohm Datas Weight ~1.4 kg

The woofer is in excellent condition and sounds great. #102047N 296/03. Made in France. The model is NOT a 684, I had to use a description in order to list the item. You are bidding on only one woofer. Please checkout my other items that I am selling in this auction.

The woofer is in excellent condition and sounds great. #102047N 296/03. Made in France. The model is NOT a 684, I had to use a description in order to list the item. You are bidding on only one woofer. Please checkout my other items that I am selling in this auction.

Pr Audax HM210AZ) 8 Woofers, 6 ohms, quality made and designed in France. They have cast frames, rubber surrounds, excellent quality and design. They were never used, open box, always in a climate controlled non smoking environment, very nice working tested condition. See the impressive specs and description below. The shipping cost includes safe packing, insurance, prompt shipping and tracking number. Buy with confidence, see my feedback. Good listening, SonnY :) The Audax HM210Z0 loudspeaker is a bass/midrange with airgel cone and molded Zamack bowl. This 8-inch high-fidelity loudspeaker is ideal for making 2-way speakers, with for example an Audax TW025A20Mg tweeter or a SEAS T25CF002 above. The HD-A (High Definition Airgel) cone is a real technological breakthrough in this field, surpassing the materials known to date. Through an extraordinary combination of a new material and an original process, Audax has created a composite cone, an innovation whose properties are close to ideal for a direct radiation transducer. Ultra light, extremely rigid and perfectly damped, this uncompromising cone is made of a controlled matrix of acrylic polymer gel enveloping ideally ordered Carbon and Kevlar fibres. An exclusive Audax process allows optimized alignment of the fibers in the polymer chain. The process provides full control of the profile and weight of the cone, while offering the ability to vary the thickness at each location. This 210 mm bass/midrange driver is intended for the design of prestigious 2 or 3-way loudspeakers. It is notably equipped with a molded Zamack chassis with ventilated under the spider to promote the best transient response and a non-resonant warhead to linearize the response at the top of the spectrum. Its good power handling results from the use of a coil on a Kapton support reinforced with glass fiber in flat copper wire on edge. The gold-plated connector allows excellent solderability. The Suggested applications table indicates different types of load (to build your loudspeaker) including the one used for measuring the response curve (Vb REF). The published curves correspond to the bass response for a given volume (Vb) and vent size (Dp-Lp). 2 or 3 way speakers of prestige. It is notably equipped with a molded Zamack chassis with ventilated under the spider to promote the best transient response and a non-resonant warhead to linearize the response at the top of the spectrum. Shielded 8 HDA cone driver High impact polymer chassis HDA (High Definition Aerogel) cone Fully shielded magnet system for audio video application Non resonant high impact polymer chassis High loss rubber surround Built in cosmetic ring designed for front-rear and recessed mounting High temperature voice coil-4 layers Aluminium former General Product type Cone driver Brand Audax Reference AP210Z0 Informations Nominal impedance 6 ohm Datas Weight ~1.4 kg

The woofer is in excellent condition and sounds great. #102047N 296/03. Made in France. The model is NOT a 684, I had to use a description in order to list the item. You are bidding on only one woofer. Please checkout my other items that I am selling in this auction.

Audax AP210M0 8 Ohm Speaker Bass/ Midrange 50W Woofer - (Pair) In Used condition In good working order, but one needs re-foaming the other one ok See specifications sheet Email me for any questions Thanks for looking ????

The woofer is in excellent condition and sounds great. #102047N 296/03. Made in France. The model is NOT a 684, I had to use a description in order to list the item. You are bidding on only one woofer. Please checkout my other items that I am selling in this auction.

Audax AP210M0 8 Ohm Speaker Bass/ Midrange 50W Woofer - (Pair) In Used condition In good working order, but one needs re-foaming the other one ok See specifications sheet Email me for any questions Thanks for looking ????

Verkaufe hiermit ein Paar (2) gebrauchte und intakte Vintage Audax HM210X0 21cm Tief-Mitteltner. Ideal fr audiophile 2Wege und Horn Konzepte. Sehr linear im Mittelton bis 2 kHz und einfach zu filtern. Guter Wirkungsgrad und knackiger Bass. Dies ist eine Privatauktion! Eine Garantie, Gewhrleistung oder Rcknahme wird hiermit ausdrcklich ausgeschlossen. Bieten Sie nicht, wenn Sie nicht damit einverstanden sind. Alle Angaben sind ohne Gewhr und wurden nach bestem Wissen und Gewissen gettigt.

Pair Fullrange speaker AUDAX 8 21cm ufo Imp 4-5 ohms Ultra light paper coneProcédé Triangule. Good condition Perfect working

The woofer is in excellent condition and sounds great. #102047N 296/03. Made in France. The model is NOT a 684, I had to use a description in order to list the item. You are bidding on only one woofer. Please checkout my other items that I am selling in this auction.

The woofer is in excellent condition and sounds great. #102047N 296/03. Made in France. The model is NOT a 684, I had to use a description in order to list the item. You are bidding on only one woofer. Please checkout my other items that I am selling in this auction.

haut-parleur Vintage Audax T21PB7 2,5 OHms. Bon tat avec quelques traces dusage et du temps. Le HP fonctionne correctement, a crachouille quand on manipule le bouton de volume intgr. Dim: 24 24 9cm

Ask me for shipping cost France mtropolitaine 6 Union Europenne 24 Reste monde 64 Perfect working Speaker , Haut-parleur AUDAX T21PA15 version ALNICO 4 ohm dual cone , bi-cone Aimant ALNICO, Alnico magnet ! Membrane bleue Diametre 21cm Bi-cone Alnico Test, tested, parfait ! Envoi protg --------------------------- Proche SUPRAVOX REHDEKO FERRIVOX etc T21PA15 4ohm D2 T24pa15 T21pa15 T21pa12 T19pa15 T19pa12 Etc

Pair Fullrange speaker AUDAX 8 21cm ufo Imp 4-5 ohms Ultra light paper coneProcédé Triangule. Good condition Perfect working

The woofer is in excellent condition and sounds great. #102047N 296/03. Made in France. The model is NOT a 684, I had to use a description in order to list the item. You are bidding on only one woofer. Please checkout my other items that I am selling in this auction.

Pair Fullrange speaker AUDAX 8 21cm ufo Imp 4-5 ohms Ultra light paper coneProcédé Triangule. Good condition Perfect working

The woofer is in excellent condition and sounds great. #102047N 296/03. Made in France. The model is NOT a 684, I had to use a description in order to list the item. You are bidding on only one woofer. Please checkout my other items that I am selling in this auction.

The woofer is in excellent condition and sounds great. #102047N 296/03. Made in France. The model is NOT a 684, I had to use a description in order to list the item. You are bidding on only one woofer. Please checkout my other items that I am selling in this auction.

AUDAX Prestige 8 Hi-Fi Audax HM210Z2 HDA Aerogel Cone 70W 2x8? DUAL VOICE COIL (Each) High performance bass drive unit from the prestige range. Featuring a composite Aerogel cone and fully ventilated, die cast chassis / pole piece, this woofer operates as a pure piston upto 400 Hz with a ruler flat response - the bass output and quality is astonishing; alignments with a f3 of below 30 Hz easily achievable for a realistic in room response to around 20 Hz. This unit is not a subwoofer, it is designed for a stereo pair of the highest quality giving excellent texture, detail and extension. Twin edge wound voice coils can be configured for 4, 8 and 16 ohms. New old stock in original factory boxes - very, very rare. Audax were true innovators and released many cutting edge technologies never seen before such as the HDA (High Definition Aerogel) cone - a unique product based on acrylic polymer gel containing carbon and kevlar fibres in perfect molecular alignment. HDA was the product of extensive research for the perfect cone material that is both lightweight, rigid and displays high internal damping.Super high performance, HDA (High Definition Aerogel) cone with rubber surround. This 8 Bass driver was developed for top range, no-compromise high end 2 or 3-way systems. It features a die cast Zamak chassis with unobstructed venting for enhanced transient response and a non resonant phase plug for high end frequency equalization. High power handling results from the flat, edgewound copper coil mounted onto a fiberglass reinforced Kapton voice coil former. Unequaled definition is achieved over a wide spectrum of frequencies and dynamic ranges while retaining a neutral tonal balance with precise and detailed imaging.

Il s’agit d’un large bande AUDAX des années 70 en très bel état version TICONAL bicône. Impédance 4 ohms ( 2.2 ohms mesuré en DC ).

Pair Fullrange speaker AUDAX 8 21cm ufo Imp 4-5 ohms Ultra light paper coneProcédé Triangule. Good condition Perfect working

Audax AP210M0 8 Ohm 8.58 Speaker Bass/ Midrange 50W In good working order You are bidding on one woofer only! Email me for any questions Thanks for looking ????

The woofer is in excellent condition and sounds great. #102047N 296/03. Made in France. The model is NOT a 684, I had to use a description in order to list the item. You are bidding on only one woofer. Please checkout my other items that I am selling in this auction.