Selling due to upgrade.Same day dispatchI have another (buy it now) listing with more information.

Selling due to upgrade, want to sell before my wife comes back from holiday in one week. (this way she would not notice thst I bought a new one)Same day dispatch if payment goes through before 3pm. I have another (buy it now) listing with more information.

Normal 0 false false false EN-GB X-NONE X-NONE Arcam SA20 Class G Integrated Amplifier Arcam SA20 still in original packaging, comes with manual and power lead. In very good used condition with surface scratches and small marks. In full working order. The Arcam SA20 is an Integrated Amplifier that improves upon the performance of the previous Arcam A29. Class G amplification and 80W of power per channel contribute to impeccable sound and efficiency. The design of the HDA range draws upon all of Arcam’s experience as one of the UK’s most respected audio companies, to produce Arcam’s best performing range of audio products yet – using the best quality components and engineering practices, the HDA range is designed and built to give you years of listening enjoyment. There are two frequent problems with hi-fi amplifiers. Class A, the traditional audiophile’s choice, uses a single power supply constantly running at full capacity, even when there’s no signal coming through. Great for reproducing those subtle details at low levels however struggles to provide extreme power when needed. Class A/B, the most common amp class, switches between the two internal amplifiers, one for each half of the waveform. Far more efficient but often a recipe for crossover distortion, since those low-level details we crave can get lost within any mis-match between the two switching over. Class G is essentially a hybrid amplifier, utilising Class A specifically for low-level signals, but when required switching in an additional power supply to power those larger sections of the waveform. Hybrid Amplifier The SA20 is rated at 80wpc into 8 ohms (both channels driven). It delivers just under 20wpc in pure Class A, while allowing for huge extra power reserves for the most demanding of loudspeakers. This groundbreaking amplifier is an absolute must for those seeking true excellence in an amplifier at an incredibly affordable price. Connectivity As with the SA10 this amplifier has 5x analogue inputs (1x line/MM switchable) but the 3x digital inputs (2x SPDIF and 1x optical) are supplied by the ESS Sabre 9038 reference DAC (as employed in the irDAC2). Compatibility The SA20 also comes with a brand new learning backlit infra-red handset and can be controlled over IP by ARCAM’s IOS app, Musiclife or by RS232. This amplifier is the direct replacement to the A29. Specifications Continuous power output (20Hz—20kHz at 0.5% THD), per channel Both channels, 8?, 20Hz—20kHz 90W Single channel, 4?, at 1kHz 180W Harmonic distortion, 80% power, 8? at 1kHz 0.002% Analogue Inputs Phono (MM) cartridge Input sensitivity at 1kHz 5mV Input impedance 47k? + 100pF Frequency response (ref. RIAA curve) 20Hz – 20kHz ± 1dB Signal/Noise ratio (A-wtd) 50W, ref. 5mV input 80dB Overload margin, ref. 5mV at 1kHz 21dB Line Inputs Nominal Sensitivity 1V Input impedance 10k? Maximum input 6Vrms Frequency response 20Hz – 20kHz ± 0.2dB Signal/Noise ratio (A-wtd) 50W, ref. 1V input 106dB Digital Inputs DAC ESS9038K2M Frequency response 20Hz - 20kHz ± 0.05dB Total harmonics distortion + Noise 0.0007% Signal/Noise ratio (A-wtd) 115dB Supported Sample Rates (Optical) 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz Supported Sample Rates (Coaxial) 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz Bit depth 16-bit – 24-bit Pre-amplifier output Nominal output level 630mV Output impedance 230? Headphone output Maximum output level into 600? 5Vrms Output impedance 1? Load range 16? – 2k? General Mains voltage 110–120V or 220–240V, 50–60Hz Maximum power consumption 500W Dimensions W x H x D (including feet, control knob and speaker terminals) 433 x 87 x 323mm Weight (net) 9.2kg Weight (gross) 11.1kg Please check all of the photographs as these helps to form part of the description. If you require any help with your order, please don’t hesitate to contact us by eBay contact form.

Ex Display unit, boxed with all accessories 12 Month Warranty Delivery or collection in person from our New Malden showroom Unilet Sound & Vision 35 High Street New Malden Surrey KT3 4BY We will only ship to the UK.

This is an excellent audiofile amplifier. I have owned it for just over two years and it has been well used but never misused. It still sounds and performs just as well in every way as when I first bought it. My only reason for selling is that I have been fortunate enough to be able to upgrade to a much more expensive model. It carries a five year manufacturers warranty and I will supply you with the original receipt for its purchase in March 2021 (so it still has well over two years warranty remaining. It was purchased from Richer Sounds so, in the unlikely event that it was to develop a fault, they would be your point of contact. All that you can see in the first picture is what you will get. I do not still have the original box but will will send the amp very carefully packaged and fully insured. On inspecting the amp before sale I discovered two small marks in the paintwork on the underside of the unit (see the last picture but one). Neither of these marks is visible from the front of the unit (see final picture). The rest of the amp is in excellent cosmetic condition. Check my feedback and bid with confidence. The Hi-Fi Choice magazine review of this amplifier is copied below- Arcam has thrown its hat firmly back into the two-channel ring with the arrival of its new HDA Series. HFC takes the plunge with the SA20Arcam has been a British success story ever since it first burst onto the hi-fi scene in the late seventies. From my point of view it has always been a reliable go-to, with products that never fail to perform admirably. The SA20 is one of three units that mark the arrival of the new HDA range. This is the first selection of two-channel components announced since the acquisition of the company in 2017 by Harman International. As always when such an event occurs, a certain amount of uncertainty over the future of the name ensues, but the new lineup underlines the firm commitment that both Arcam and its new owners have to the resurgence in two-channel audio. Even more interesting is that the second model in the HDA lineup is a lower-cost amplifier, the £699 Class A/B SA10, while the third is the CDS50 CD player. Yes, that’s right – a CD player. OK, it has the requisite network player and streaming facilities, but the fact remains it’s also a high-quality CD and SACD player. You know – one of those things we were all assured would be dying out any day now!The SA20, however, is somewhat more unusual, despite being essentially an 80W-per-channel integrated amplifier. The headline is its use of a Class G topology in its output stage, which is a rather clever method that builds on basic Class A technology. The result is more power when required, but without the concomitant downside of unwanted heat when things are playing more quietly. More details can be found in the In Sight boxout overleaf but, briefly, the amplifier has two power rails for its output stage – one for normal, low-level listening and a second that is brought into play when more volume is demanded. Essentially, you can think of it as being a bit like a turbocharger on a car engine, albeit without the bangs and flames from the rear when the demand drops off once more...The HDA series also marks the arrival of a slight re-style for the company’s products. The Arcam DNA is still there, but the units are sleeker, more stylish and definitely more feature packed than before. A comprehensive control menu structure is accessible through both the remote control handset and the front panel, giving more options than might be first expected. In the case of the SA20, this provides access to five digital filter options, display dimming settings, an A/V pass-through setting for any of the inputs, a standby timeout and the option to choose whether the insertion of a headphone plug automatically mutes the speakers or not.Overall, the SA20 is neatly laid out and easy to operate. Three digital inputs are available – one optical and two coaxial – plus three line inputs and an MM phono stage. Other socketry at the rear includes RS232 and Ethernet connections to link the unit to a home automation network, for which a more than comprehensive programming guide document is available on the Arcam website. In addition, the supplied remote control handset can be programmed to operate other equipment from additional manufacturers and, again, instructions and a range of pre-programmed codes for common partnering items is available.A USB socket can also be found on the rear panel, but this is for software upgrades only and is not a dedicated input as such. Those wishing to connect a personal audio player will need to do so via the front panel AUX input, which is a standard 3.5mm stereo jack socket. Beside this, an additional 3.5mm socket provides connection for headphones.For auditioning, I set the SA20 up with my regular PMC twenty.24 loudspeakers and driven by a Naim CD5 XS/Flatcap XS CD player into the CD input, plus a Michell Gyro SE turntable with SME 309 arm and Ortofon 2M Black cartridge (HFC 434) into the MM phono input.Sound quality I generally find Arcam products to have something of a house sound and I am pleased to note that the SA20 has continued this tradition, as it is very much a good thing. There is nothing about its performance that will ‘frighten the horses’ and yet it never sounds especially drab or soporific. The SA20 strikes a very well-judged balance between pulling you into the music with its fine level of detail, but never throwing absolutely everything at you in a bit of a jumble. It is generally composed, yet ebullient.The first thing that strikes me about it, and which is something that takes me back to a more recent Arcam favourite in the form of the FMJ A28 (HFC 311), is the delightful midrange performance. The SA20 has a remarkable sense of image depth and is able to deftly paint surprisingly expansive sonic pictures between the loudspeakers.As a result, the Arcam really helps to bring music alive before your ears in a way that belies its price tag. Vocalists, in particular, stand firmly centre stage, locked into pin-sharp focus and with just the right amount of fine detail that makes intakes of breath easy to pick out, but not distracting. Donnie Munro’s magnificent version of Runrig’s Always The Winner, recorded live at the Royal Albert Hall and accompanied by just a piano, is a true hairs-on-the-back-of-the-neck moment through the SA20. Furthermore, the sense of scale of the location is surprisingly easy to discern.The delightful midrange is aided in its endeavours by a sweet and open treble performance. Top-end detail is most impressive and the SA20 does a fine job of pulling the subtleties that are buried in the back of recordings neatly to the fore. The caveat here is that this sense of poise and clarity is only guaranteed at normal volume and slightly above, but once you start to push things further, there is a tendency to harden up. At a standard listening level the explosive cymbal strike in the middle of Jeff Buckley’s So Real is impressively dynamic, but turn the wick up further and it turns into a rather splashy crash.At the low end, the SA20 sets off to a fine start by serving up a main course of deep, firm bass with a pleasing side order of additional detail. Simpler synthesiser bass lines bound along enthusiastically while double basses have a delightful roundness to their notes. In addition, Ian Maidman’s fretless bass line on David Sylvian’s Taking The Veil comes across in all its sinuous, fluid glory and propels the track along perfectly.The only time this impressive performance starts to show a few cracks is, again, when the SA20 is pushed harder. When elevated to neighbour-annoying volume levels, the thumping bass line from Underworld’s Jumbo sees the Arcam starting to sound a little uncertain for the first time. The bass notes are certainly solid and weighty, but the SA20 seems to be struggling ever so slightly to keep up with their pace, making the underlying tempo of the track a little less tight than usual. Bringing the volume back down a touch restores order, but it seems a shame not to be able to pound something like this out noisily.Conclusion The SA20 marks a fine return to the forefront of well-priced two-channel reproduction for Arcam. It is well constructed, neat and blessed with a good range of inputs and functions. As long as it is not pushed too hard, it has a sound that is typically Arcam in the very best sense and makes a convincing case for itself at the price (£999).

Amplificateurs Arcam SA20 Avec facture en date du 07/01/2020boîte dorigine la garantie est de 5 ans/larticle à été enregistré sur le site dArcamlampli devra être retiré sur Bruxelles Sappuyant sur le niveau de performance de lA29, lamplificateur intégré ARCAM SA20 utilise la technologie de classe G propriétaire à Arcam. LARCAM SA20 a une puissance de 80W RMS sous 8 ohms. Il délivre un peu moins de 20 W en pure classe A, tout en permettant dénormes réserves de puissance supplémentaire pour les enceintes les plus exigeantes. Cet amplificateur est un must absolu pour ceux qui recherchent lexcellence dans un amplificateur à un prix incroyablement abordable. Comme pour lARCAM SA10, lampli possède 5 entrées analogiques (dont une entrée phono), les 3 entrées numériques (2 SPDIF et 1 optique) sont fournies par le DAC de référence ESS Sabre 9038 (tel quutilisé dans lirDAC 2). LARCAM SA20 est également livré avec une toute nouvelle télécommande rétro-éclairé et peut être contrôlé sur IP (via la prise réseau RJ-45) par lapplication iOS dARCAM, Musiclife ou par RS232. Cet amplificateur est le remplaçant direct de lA29. La prise USB servira à mettre à jour votre Arcam lorsque des nouvelles fonctionnalités seront disponibles. Le SA20 dispose dun mode processeur sur nimporte quelle entrée. Dans ce mode, lARCAM SA20 est réglé sur un niveau fixe. En accédant au menu de configuration (via un maintien de 3 secondes sur le bouton MUTE de la façade), vous aurez accès à divers paramètres de lARCAM SA20, comme le réglage de la luminosité de laffichage, la durée avant la mise en veille, le choix de lentrée dédiée au mode processeur, entre autres. Arcam conçoit et fabrique des électroniques de grande qualité depuis plus de trois décennies et le nouvel ampli intégré SA20 est le dernier modèle dune longue lignée de produits hi-fi prisés.

Custom made A & R Cambridge C200 Pre-Amplifier to A & R Cambridge SA200/SA150 Interconnect (Arcam) A very high quality 500mm long analogue interconnect. This interconnect is suitable for connecting the output of a A & R C200 pre-amplifier to the matching power amplifiers; the A & R SA200 and SA150. The interconnect is also suitable for connecting the output from the A & R C200 pre-amplifier to the A & R A60P amplifier. Please note; this interconnect is not suitable for Naim Audio or Quad equipment. It is specific to the listing combinations and must be connected the correct way which is indicated by the red marker. This Van Damme cable is of professional quality and features a central conductor of Ultra Pure Oxygen Free Copper (UPOFC) in combination with silver plated UPOFC. Insulation is cross linked Polyethylene with a heavily braided screen of tinned oxygen free copper. The black jacket is a very flexible PVC/Neoprene composite. The robust nickel plated professional Deltron DIN plugs are fully screened with brass, silver plated, contact pins. Tidy up your equipment rack with custom lengths and replace tired cables. All cables hand assembled and tested prior to dispatch. E mail me if you require a different length, termination and/or quantity. Ask for a full list of interconnects available. I can also provide a comprehensive range of interconnects and adapters for the A & R Cambridge A60, A & R Cambridge A60AP+ Integrated Amplifiers, A & R Cambridge T21 Tuner, A & R Cambridge C200 Pre-Amplifier and A & R Cambridge SA200/SA150 Power Amplifier. A 3.5mm stereo jack to 5 pin DIN interconnect suitable for connecting your iPod/iPad/iPhone/MP3 is also available to order. Please ask any questions you may have prior to purchase.

ARCAM SA20 INTEGRATED AMPLIFIER. Immaculate condition. Comes with remote, power lead and manual. Collection only from Bracknell, Berkshire as no box available.

Arcam SA20 Stereo integrated amplifier with built-in DAC - BRAND NEW 2-channel.

Amp is less than 1 yr old. No issues. Will double box for shipping.

Product Details Nearly New - Arcam SA20 Integrated Amplifier This product comes with a 5 Year warranty. All of our Nearly New products are usually customer returns or Ex Display items and they have been professionally checked by our dedicated Service Department prior to being advertised. All products are supplied with a full manufacturer’s warranty, some even include Peter Tyson’s 5 Year Extended Warranty, giving you the ability to buy with confidence. Please see the description section for additional information regarding this specific product. The Arcam SA20 is an Integrated Amplifier that improves upon the performance of the previous Arcam A29. Class G amplification and 80W of power per channel contribute to impeccable sound and efficiency. Product Details Box Original - Good Condition Packaging Original - Good Condition Product Excellent Condition - Product is blemish free Accessories Complete

Product Details Nearly New - Arcam SA20 Integrated Amplifier This product comes with a 5 Year warranty. All of our Nearly New products are usually customer returns or Ex Display items and they have been professionally checked by our dedicated Service Department prior to being advertised. All products are supplied with a full manufacturer’s warranty, some even include Peter Tyson’s 5 Year Extended Warranty, giving you the ability to buy with confidence. Please see the description section for additional information regarding this specific product. The Arcam SA20 is an Integrated Amplifier that improves upon the performance of the previous Arcam A29. Class G amplification and 80W of power per channel contribute to impeccable sound and efficiency. Product Details Box Original - Good Condition Packaging Original - Good Condition Product Excellent Condition - Product is blemish free Accessories Complete

Genuine New Arcam SA10 & SA20 AVR And Player Remote Control. This is NOT an Open BOX item. Remotes come unpackaged in the box of the New Arcam Receivers Two (2) NEW AAA ENERGIZER MAX Batteries are Included

Custom made A & R Cambridge C200 Pre-Amplifier to A & R Cambridge SA200/SA150 Interconnect (Arcam) A very high quality 500mm long analogue interconnect. This interconnect is suitable for connecting the output of a A & R C200 pre-amplifier to the matching power amplifiers; the A & R SA200 and SA150. The interconnect is also suitable for connecting the output from the A & R C200 pre-amplifier to the A & R A60P amplifier. Please note; this interconnect is not suitable for Naim Audio or Quad equipment. It is specific to the listing combinations and must be connected the correct way which is indicated by the red marker. This Van Damme cable is of professional quality and features a central conductor of Ultra Pure Oxygen Free Copper (UPOFC) in combination with silver plated UPOFC. Insulation is cross linked Polyethylene with a heavily braided screen of tinned oxygen free copper. The black jacket is a very flexible PVC/Neoprene composite. The robust nickel plated professional Deltron DIN plugs are fully screened with brass, silver plated, contact pins. Tidy up your equipment rack with custom lengths and replace tired cables. All cables hand assembled and tested prior to dispatch. E mail me if you require a different length, termination and/or quantity. Ask for a full list of interconnects available. I can also provide a comprehensive range of interconnects and adapters for the A & R Cambridge A60, A & R Cambridge A60AP+ Integrated Amplifiers, A & R Cambridge T21 Tuner, A & R Cambridge C200 Pre-Amplifier and A & R Cambridge SA200/SA150 Power Amplifier. A 3.5mm stereo jack to 5 pin DIN interconnect suitable for connecting your iPod/iPad/iPhone/MP3 is also available to order. Please ask any questions you may have prior to purchase.

Custom made A & R Cambridge C200 Pre-Amplifier to A & R Cambridge SA200/SA150 Interconnect (Arcam) A very high quality 500mm long analogue interconnect. This interconnect is suitable for connecting the output of a A & R C200 pre-amplifier to the matching power amplifiers; the A & R SA200 and SA150. The interconnect is also suitable for connecting the output from the A & R C200 pre-amplifier to the A & R A60P amplifier. Please note; this interconnect is not suitable for Naim Audio or Quad equipment. It is specific to the listing combinations and must be connected the correct way which is indicated by the red marker. This Van Damme cable is of professional quality and features a central conductor of Ultra Pure Oxygen Free Copper (UPOFC) in combination with silver plated UPOFC. Insulation is cross linked Polyethylene with a heavily braided screen of tinned oxygen free copper. The black jacket is a very flexible PVC/Neoprene composite. The robust nickel plated professional Deltron DIN plugs are fully screened with brass, silver plated, contact pins. Tidy up your equipment rack with custom lengths and replace tired cables. All cables hand assembled and tested prior to dispatch. E mail me if you require a different length, termination and/or quantity. Ask for a full list of interconnects available. I can also provide a comprehensive range of interconnects and adapters for the A & R Cambridge A60, A & R Cambridge A60AP+ Integrated Amplifiers, A & R Cambridge T21 Tuner, A & R Cambridge C200 Pre-Amplifier and A & R Cambridge SA200/SA150 Power Amplifier. A 3.5mm stereo jack to 5 pin DIN interconnect suitable for connecting your iPod/iPad/iPhone/MP3 is also available to order. Please ask any questions you may have prior to purchase.

Custom made A & R Cambridge C200 Pre-Amplifier to A & R Cambridge SA200/SA150 Interconnect (Arcam) A very high quality 500mm long analogue interconnect. This interconnect is suitable for connecting the output of a A & R C200 pre-amplifier to the matching power amplifiers; the A & R SA200 and SA150. The interconnect is also suitable for connecting the output from the A & R C200 pre-amplifier to the A & R A60P amplifier. Please note; this interconnect is not suitable for Naim Audio or Quad equipment. It is specific to the listing combinations and must be connected the correct way which is indicated by the red marker. This Van Damme cable is of professional quality and features a central conductor of Ultra Pure Oxygen Free Copper (UPOFC) in combination with silver plated UPOFC. Insulation is cross linked Polyethylene with a heavily braided screen of tinned oxygen free copper. The black jacket is a very flexible PVC/Neoprene composite. The robust nickel plated professional Deltron DIN plugs are fully screened with brass, silver plated, contact pins. Tidy up your equipment rack with custom lengths and replace tired cables. All cables hand assembled and tested prior to dispatch. E mail me if you require a different length, termination and/or quantity. Ask for a full list of interconnects available. I can also provide a comprehensive range of interconnects and adapters for the A & R Cambridge A60, A & R Cambridge A60AP+ Integrated Amplifiers, A & R Cambridge T21 Tuner, A & R Cambridge C200 Pre-Amplifier and A & R Cambridge SA200/SA150 Power Amplifier. A 3.5mm stereo jack to 5 pin DIN interconnect suitable for connecting your iPod/iPad/iPhone/MP3 is also available to order. Please ask any questions you may have prior to purchase.

Product Details Nearly New - Arcam SA20 Integrated Amplifier This product comes with a 5 Year warranty. All of our Nearly New products are usually customer returns or Ex Display items and they have been professionally checked by our dedicated Service Department prior to being advertised. All products are supplied with a full manufacturer’s warranty, some even include Peter Tyson’s 5 Year Extended Warranty, giving you the ability to buy with confidence. Please see the description section for additional information regarding this specific product. The Arcam SA20 is an Integrated Amplifier that improves upon the performance of the previous Arcam A29. Class G amplification and 80W of power per channel contribute to impeccable sound and efficiency. Product Details Box Original – Poor Condition – Box shows signs of wear and tear Packaging Original - Good Condition Product Excellent Condition - Product is blemish free Accessories Complete

Arcam SA20 Class G Integrated stereo Amplifier As New Condition. With remote Batteries Instructions Never used and in mint new condition. Hi quality sound for hi end audio Superb power, detail, midrange base. English made with superb build quality 5 star reviews in hifi choice and what hifi