Product highlights:50 watts x 2 channels into 8 ohms (20-20,000 Hz) at .5% THDefficient Class A/B amplifierTHD: 0.003% (80% power, 8 ohms at 1kHz)built-in high-performance ESS9016K2M Sabre DACtoroidal power transformer for low noise and high-current outputProcessor Mode lets you connect to a surround sound receiver or pre/pro and use the SA10 as a power ampremote control includedInputs:1 optical and 2 coaxial digital audio inputs3 stereo RCA audio inputsstereo RCA phono input for moving magnet phono cartridgesEthernet port for connecting to a home networkenables wireless control with your mobile device using Arcams free control appRS-232 port for use with third-party control systemsType-A USB for firmware updatesOutputs:1 stereo RCA preamp outputL/R speaker outputs with binding-post connectorsDimensions and Warranty:17-1/16W x 3-7/16H x 12-1/4Dweight: 18.5 lbs.warranty: 5 years60-day returnsMFR # ARC-SA10-USWhats in the box:Arcam SA10 owners manualIntegrated Amplifier6.5 AC power cordRemote control2 AAA batteriesHandbook ManualThank You Letter

Hear every detailHigh-quality amplification isnt just about making your speakers play loud — its also about reproducing detail and dynamics. The efficient Class A/B amplifier inside Arcams SA10 lets you hear each note a finger-picking guitarist plucks, and every nuance of a trained singers voice. Put it between your favorite music source and your favorite pair of speakers, and let er rip. Yes, thats plenty of powerWe know 50 watts per channel might not sound like a lot on paper, but this cleverly designed amplifier delivers that power when and where its needed, and thats whats important. The high-performance ESS9016K2M Sabre DAC and a low noise floor also help that seemingly modest power budget go a long way. Convenient connectionsThe SA10 gives you plenty of options for connecting music sources. Theres a Toslink optical connector and two digital coaxial inputs on the back of the chassis, along with three stereo analog RCA inputs. For vinyl enthusiasts, theres a dedicated phono input for turntables with moving magnet phono cartridges. My hands-on experience with the SA10Some of my colleagues like to set up demonstrations at HQ, so we can all experience how various gear setups perform. To that end, a couple of them set up the SA10 in our training room to drive a pair of Monitor Audio Studio bookshelf speakers. A Bluesound Node 2i was connected via the digital coaxial input on the back of the amp to serve as a streaming source. The setup sounded pretty good as I poked around a playlist filled with classic rock tunes — I especially liked hearing some extra nuances in Van Morrisons voice — but I wanted to find something that would really command the space. Our training room is a converted three-door car installation bay, so it takes a lot of filling. I finally found what I was looking for, and began jamming to a Summer BBQ playlist filled with Outkast, DJ Jazzy Jeff and the Fresh Prince, and Beyonce. The SA10 provided 85 watts per channel to the 4-ohm Monitor Audio speakers, so things got lively. The speakers, even without a subwoofer, put out a convincing, danceable amount of bass. Music lovers rest assured. The Arcam SA10 is an excellent centerpiece for a solid two-channel system.

Comes with remote USA Power cord 120v Manual / handbook Ships in the original box Purchased new in 2020 from an Arcam dealer Used in a bedroom system Experience high-quality audio with the Arcam SA10 Class AB Integrated Amplifier. This gray amplifier features 6 inputs including coaxial digital, stereo L/R RCA, and digital optical TOSLINK. It also has 1 line output including RCA, headphone jack, stereo L/R RCA, and digital optical TOSLINK. The Arcam SA10 has a power of 50 W and an amplifier class of AB. It offers both analog and digital features, making it a versatile addition to your home audio setup. This integrated amplifier is perfect for those who want a sleek and compact design without compromising on audio quality.

Comes with remote USA Power cord 120v Manual / handbook Ships in the original box Purchased new in 2020 from an Arcam dealer Used in a bedroom system Experience high-quality audio with the Arcam SA10 Class AB Integrated Amplifier. This gray amplifier features 6 inputs including coaxial digital, stereo L/R RCA, and digital optical TOSLINK. It also has 1 line output including RCA, headphone jack, stereo L/R RCA, and digital optical TOSLINK. The Arcam SA10 has a power of 50 W and an amplifier class of AB. It offers both analog and digital features, making it a versatile addition to your home audio setup. This integrated amplifier is perfect for those who want a sleek and compact design without compromising on audio quality.

Hear every detailHigh-quality amplification isnt just about making your speakers play loud — its also about reproducing detail and dynamics. The efficient Class A/B amplifier inside Arcams SA10 lets you hear each note a finger-picking guitarist plucks, and every nuance of a trained singers voice. Put it between your favorite music source and your favorite pair of speakers, and let er rip. Yes, thats plenty of powerWe know 50 watts per channel might not sound like a lot on paper, but this cleverly designed amplifier delivers that power when and where its needed, and thats whats important. The high-performance ESS9016K2M Sabre DAC and a low noise floor also help that seemingly modest power budget go a long way. Convenient connectionsThe SA10 gives you plenty of options for connecting music sources. Theres a Toslink optical connector and two digital coaxial inputs on the back of the chassis, along with three stereo analog RCA inputs. For vinyl enthusiasts, theres a dedicated phono input for turntables with moving magnet phono cartridges. My hands-on experience with the SA10Some of my colleagues like to set up demonstrations at HQ, so we can all experience how various gear setups perform. To that end, a couple of them set up the SA10 in our training room to drive a pair of Monitor Audio Studio bookshelf speakers. A Bluesound Node 2i was connected via the digital coaxial input on the back of the amp to serve as a streaming source. The setup sounded pretty good as I poked around a playlist filled with classic rock tunes — I especially liked hearing some extra nuances in Van Morrisons voice — but I wanted to find something that would really command the space. Our training room is a converted three-door car installation bay, so it takes a lot of filling. I finally found what I was looking for, and began jamming to a Summer BBQ playlist filled with Outkast, DJ Jazzy Jeff and the Fresh Prince, and Beyonce. The SA10 provided 85 watts per channel to the 4-ohm Monitor Audio speakers, so things got lively. The speakers, even without a subwoofer, put out a convincing, danceable amount of bass. Music lovers rest assured. The Arcam SA10 is an excellent centerpiece for a solid two-channel system.

This is an Arcam SA10 Class AB Integrated Amplifier that delivers exceptional sound quality. With 8 audio inputs including Coaxial Digital, USB, Stereo L/R RCA, and Digital Optical TOSLINK, you can connect all your audio devices and enjoy your favorite music. The amplifier boasts a power output of 50 W and features both analog and digital capabilities. It comes in a sleek gray color and includes audio outputs such as RCA, headphone jack, stereo L/R RCA, and digital optical TOSLINK. This amplifier is perfect for any music lover looking for an outstanding audio experience. This unit has very low run hours and has all original accessories and shipping container. Great condition.

Arcam SA-10 integrated amplifier. Purchased new in Jan 24 for a 2-channel system but no longer have the space for a separate setup. Used very little. Mint condition. Sounds fantastic. Ships in original box and packaging with manual, remote, and power cable. MSRP was $880.

Arcam SA-10 in like new condition. Used in a second system. Less than 20 hours of use. Forced to sell. Flawless sonically and cosmetically. Beautiful amp with excellent phono section. Also listing cd player and turntable - see other listings. Purchased brand new from authorized dealer. View my feedback and bid with complete confidence.

Originalowner like new

Unit has been tested and sanitized. Functioning perfectly with a few minor scuffs and dents. Extremely efficient class A/B amplification 50W of power per channel 5 analogue inputs including phono 3 digital inputs 32-bit DAC,Sabre ESS9016K2M Full I/P control Total harmonic distortion + noise = 0.003%

Unit has been tested and sanitized. Functioning perfectly with a few minor scuffs and dents. Extremely efficient class A/B amplification 50W of power per channel 5 analogue inputs including phono 3 digital inputs 32-bit DAC,Sabre ESS9016K2M Full I/P control Total harmonic distortion + noise = 0.003%

ELECTRO CITY TRADING CONDITIONUsed works great. Has light marks. Missing the remote, original packaging, and other accessoires. Include the Amp and power cable. The knob has small scratch. Items are tested, some may have minor signs of handling. We only ship to the 48 lower states. Returns will NOT be accepted if serial numbers do not match. A restocking fee of 20% will be deducted from refund for ALL items returned for any reason other than DOA (Dead On Arrival) We don’t ship Saturday and Sunday, Please allow 1-2 business days for questions to be answered. Please contact us if you have any problems with the item. We ship items within a couple of hours from the purchase. We appreciate your positive feedback. Thank You All

We have this preowned Arcam SA10 integrated amplifier in black. The amplifier is in very good condition with some very minor cosmetic marks and hairline scratches. It comes with its remote control and mains lead. It does not come with its original packaging but we will send it in suitable alternative packaging. Unit Serial Number: GP0001-DI0001024 £20 Mainland UK Delivery Any queries please do not hesitate to contact us. TI-1-65074-93009 Auction items can be viewed and demoed if practical at our demo rooms in Hull, please make an appointment in advance. Fanthorpes Hifi is based in a stunning Edwardian Arcade in Hull East Yorkshire. There are no pressure sales, we only sell the brands we believe in and always put the customer first. We are specialists in CHORD, PMC, Bryston, Devialet, Arcam, Musical Fidelity, Martin Logan amongst others please check our website for more details. HS

Powered by SixBits eCommerce Solution

Unit has been tested and sanitized. Functioning perfectly with a few minor scuffs and dents. Extremely efficient class A/B amplification 50W of power per channel 5 analogue inputs including phono 3 digital inputs 32-bit DAC,Sabre ESS9016K2M Full I/P control Total harmonic distortion + noise = 0.003%

Originalowner like new

Unit has been tested and sanitized. Functioning perfectly with a few minor scuffs and dents. Extremely efficient class A/B amplification 50W of power per channel 5 analogue inputs including phono 3 digital inputs 32-bit DAC,Sabre ESS9016K2M Full I/P control Total harmonic distortion + noise = 0.003%

Originalowner like new

Unit has been tested and sanitized. Functioning perfectly with a few minor scuffs and dents. Extremely efficient class A/B amplification 50W of power per channel 5 analogue inputs including phono 3 digital inputs 32-bit DAC,Sabre ESS9016K2M Full I/P control Total harmonic distortion + noise = 0.003%

The Arcam SA10 Class AB Integrated Amplifier is a top-of-the-line product that delivers exceptional audio quality. With a brand like Arcam, you can expect nothing but the best from this amplifier. This amplifier has 8 audio inputs, including Coaxial Digital, USB, Stereo L/R RCA, and Digital Optical TOSLINK, which provide a wide range of connectivity options. The SA10 model features both analog and digital capabilities, making it the perfect choice for audiophiles who want to enjoy their music in high fidelity. This amplifier has a maximum power output of 50 W and is equipped with Amplifier Class AB. Additionally, it comes in a sleek gray color that will complement any home audio setup. With this amplifier, you can experience a superior listening experience like no other. It is in mint condition and will shipped in the original packaging.

Originalowner like new

We have this ex-display Arcam SA10 integrated amplifier in black. Supplied with a 12 month warranty It is in very good condition with some very minor cosmetic marks and scratches which can be seen in the pictures attached. The unit comes with its remote control, user manual and UK & EU mains leads, as well as its original box & packaging. Unit Serial Number: GP0001-DI0001018 £20 Mainland UK Delivery Any queries please do not hesitate to contact us. Auction items can be viewed and demoed if practical at our demo rooms in Hull, please make an appointment in advance. Fanthorpes Hifi is based in a stunning Edwardian Arcade in Hull East Yorkshire. There are no pressure sales, we only sell the brands we believe in and always put the customer first. We are specialists in CHORD, PMC, Bryston, Devialet, Arcam, Musical Fidelity, Martin Logan amongst others please check our website for more details. HS

Original owner like new. Arcam - SA10 170W 2.0-Ch. Integrated Amplifier - Gray.