Sintoamplificatore AV della inglese Arcam. Perfetto, poche ore di funzionamento, con telecomando, antenna AM, manuale, cavo di alimentazione ed imballo originale.Come vedete dalle foto vi è ancora il cellophane protettivo sul display!!!Altre foto su richiesta Tuning range: FM, MW Power output: 100 watts per channel into 8ohm (stereo) Surround output: 80W (front), 80W (center), 80W (rear) Frequency response: 20Hz to 20kHz Total harmonic distortion: 0.2% Input sensitivity: 500mV (line) Signal to noise ratio: 100dB (line) Digital inputs: coaxial, optical Video Connections: HDMI, component, composite, SVHS Dimensions: 433 x 420 x 145mm Weight: 15.9kg Accessories: CR100 remote control

See full item description, click here. Listed by Frooition Frooition | No-js Template | eBay design, eBay store design, eBay shop design, eBay template design, eBay listing design, eBay Listing Tool (ver:froo_no_js)

Continuous power output, per channel, 8?2 channels driven, 20Hz - 20kHz, <0.02% THD - 90W2 channels driven, 1kHz, 0.2% THD - 115W 7 channels driven, 1kHz, 0.2% THD - 75WResidual noise & hum (A-wtd) - <0.15mV Audio Performance (Stereo line inputs)Signal/noise ratio (A-wtd ref 100W) normal / stereo direct - 100dB / 110dB Frequency response - 20Hz—20kHz ± 0.2dB Video Inputs HDMI - x7, Component - x3, Composite - x4 Video OutputsHDMI - x2 (ARC Compatible), Z2 - x1 (Composite) Audio InputsHDMI - x7Coax SPDIF - x4Toslink - x2RCA Phono - x6USB inputEthernet ClientInternet RadioARC (from display) Audio Outputs7.1 Pre-amp ouput - 6x RCA PhonoZone 2 output - RCA Phono Radio TunerFM Supported Surround Modes IncludeDolby TrueHDDolby Digital PlusDolby Digital EXDolby Digital 5.1Dolby Pro Logic IIx DTS-HD Master AudioDTS-ES 6.1 DiscreteDTS-ES 6.1 MatrixDTS 5.1 General Power consumption (max) - 1.5kW (approx. 5200 BTU/hour)Power consumption (standby) - <0.5W Dimensions & WeightsW x D (inc. speaker terminals) x H (inc. feet) - 433 x 425 x 171mm Weight (net) - 15.1kgWeight (packed) - 18.5kg ARCAM FMJ AVR380SURROUND AMPLIFIER,HAD THIS SINCE NEW, BEEN AN AWESOME AMP AND STILL IS, RECENT HOUSE MOVE AND MUCH SMALLER ROOM AND ROOM RESTRICTIONS HAS FORCED ME TO GO TO A STEREO ONLY SETUP.SO THIS IS UP FOR MOVING ALONG,PLEASE SEE 7TH AND 8TH PHOTOS, THIS SHOWS A MINUTE CHIP IN THE TOP EDGE OF THE UNIT. IT REALLY IS TINY, BUT ITS THERE, THOUGHT IT WAS WORTH MENTIONING. APART FROM THIS AS YOU CAN SEE ITS UNMARKED.AND WORKS PERFECTLY.ALL DETAILS FOR THIS AMP CAN BE FOUND ON THE ARCAM WEBSITE,COMES WITH ITS REMOTE, POWER CABLE, AND MANUAL AND MIC.WILL BE IN ITS ORIGINAL BOX.SORRY BUT COLLECTION ONLY DUE TO ITS WEIGHT, THIS IS A HEAFTY QUALITY UNIT.

Arcam AVR280 7.1 AV Receiver Home Cinema Amp, Silver Surround The AVR280 is a high quality and high performance home cinema processor and multi-channel audio amplifier built to Arcam’s traditional high quality design and manufacturing standards. It combines high resolution digital processing with high performance audio and video components to bring you an unrivalled home entertainment centre. In addition to the built-in tuner, the AVR280 allows switching and volume control of seven analogue and six digital sources, making it an ideal companion for both home cinema and two-channel stereo systems. Since many of these source components are also capable of outputting high quality video signals, the AVR280 includes broadcast quality video switching for composite, S-video, component, RGB- and HDMI-video signals. There are inputs and outputs for both tape and VCR, as well as a digital output. DVD-Audio or SACD can be connected via the multi-channel input. Control of the AVR280 is either by front panel control buttons, IR remote control or an RS232 port (which also can be used to upload future software enhancements).

Continuous power output, per channel, 8?2 channels driven, 20Hz - 20kHz, <0.02% THD - 90W2 channels driven, 1kHz, 0.2% THD - 115W 7 channels driven, 1kHz, 0.2% THD - 75WResidual noise & hum (A-wtd) - <0.15mV Audio Performance (Stereo line inputs)Signal/noise ratio (A-wtd ref 100W) normal / stereo direct - 100dB / 110dB Frequency response - 20Hz—20kHz ± 0.2dB Video Inputs HDMI - x7, Component - x3, Composite - x4 Video OutputsHDMI - x2 (ARC Compatible), Z2 - x1 (Composite) Audio InputsHDMI - x7Coax SPDIF - x4Toslink - x2RCA Phono - x6USB inputEthernet ClientInternet RadioARC (from display) Audio Outputs7.1 Pre-amp ouput - 6x RCA PhonoZone 2 output - RCA Phono Radio TunerFM Supported Surround Modes IncludeDolby TrueHDDolby Digital PlusDolby Digital EXDolby Digital 5.1Dolby Pro Logic IIx DTS-HD Master AudioDTS-ES 6.1 DiscreteDTS-ES 6.1 MatrixDTS 5.1 General Power consumption (max) - 1.5kW (approx. 5200 BTU/hour)Power consumption (standby) - <0.5W Dimensions & WeightsW x D (inc. speaker terminals) x H (inc. feet) - 433 x 425 x 171mm Weight (net) - 15.1kgWeight (packed) - 18.5kg ARCAM FMJ AVR380SURROUND AMPLIFIER,HAD THIS SINCE NEW, BEEN AN AWESOME AMP AND STILL IS, RECENT HOUSE MOVE AND MUCH SMALLER ROOM AND ROOM RESTRICTIONS HAS FORCED ME TO GO TO A STEREO ONLY SETUP.SO THIS IS UP FOR MOVING ALONG,PLEASE SEE 7TH AND 8TH PHOTOS, THIS SHOWS A MINUTE CHIP IN THE TOP EDGE OF THE UNIT. IT REALLY IS TINY, BUT ITS THERE, THOUGHT IT WAS WORTH MENTIONING. APART FROM THIS AS YOU CAN SEE ITS UNMARKED.AND WORKS PERFECTLY.ALL DETAILS FOR THIS AMP CAN BE FOUND ON THE ARCAM WEBSITE,COMES WITH ITS REMOTE, POWER CABLE, AND MANUAL AND MIC.WILL BE IN ITS ORIGINAL BOX.SORRY BUT COLLECTION ONLY DUE TO ITS WEIGHT, THIS IS A HEAFTY QUALITY UNIT.