1 kHz Track Alignment Cassette 87B GennLab 1 kHz Track Alignment Cassette Version 87B The Cassette is recorded for the Playback Head Height calibration of Nakamichi cassette decks. Adjust Playback Head Height Gear to obtain the MINIMUM reading of the Output Signal for both channels. Please note. This new Cassette can now be used to adjust all other brands of cassette tape deck equipped with adjustable Tape Guides NOT permanently attached to the head. The Tape is recorded on new TDK 18u tape OFF SHELL using the OTARI 0.15 (3.81 mm) Reel-to-Reel MX-5050BIII-1-P2/1 Production tape recorder and professional test equipment.This tape recorder, is equipped with the Focused-Field Narrow Track Instrumental Record Heads and has precisely machined Tape Guides. This provides an extremely stable Track position on the tape. The 1 kHz Track is recorded at the END of tape starting at the last 5 minutes. The 87B version of the Tape is equivalent to Nakamichi DA09087B Test Tapes. It can be used to calibrate Nakamichi decks equipped with Playback Head with wide gap between channels: CR Series (CR-3, CR-4, CR-7), BX-300, Dragon etc. FYI, The Japanese ABEX stopped the production and sales of ALL test cassettes in October 2010

I’m the original owner of this gem and comes from a smoke free environment. Selling for parts as is NO returns. Unit itself is good, forward plays clear, but when it auto reverses, it sounds muddy. Email any questions Thanks

1 kHz Track Alignment Cassette 07A GennLab 1 kHz Track Alignment Cassette Version 07A The Cassette is recorded for the Playback Head Height calibration of Nakamichi cassette decks. Adjust Playback Head Height Gear to obtain the MINIMUM reading of the Output Signal for both channels. Please note. This new Cassette can now be used to adjust all other brands of cassette tape deck equipped with adjustable Tape Guides NOT permanently attached to the head. The Tape is recorded on new TDK 18u tape OFF SHELL using the OTARI 0.15 (3.81 mm) Reel-to-Reel MX-5050BIII-1-P2/1 Production tape recorder and professional test equipment.This tape recorder, is equipped with the Focused-Field Narrow Track Instrumental Record Heads and has precisely machined Tape Guides. This provides an extremely stable Track position on the tape. The 1 kHz Track is recorded at the END of tape starting at the last 5 minutes. The 07A version of the Tape is equivalent to Nakamichi DA09007A Test Tapes. It can be used to calibrate Nakamichi decks equipped with Playback Head with narrow gap between channels: 480, 481, 482Z, 582, 582Z, 600, 600II, 660ZX, 670ZX, 680ZX, 682ZX, 700, 700II, 700ZXE, 700ZXL, 1000II, 1000ZXL, ZX-3, ZX7, ZX9. FYI, The Japanese ABEX stopped the production and sales of ALL test cassettes in October 2010

1 kHz Track Alignment Cassette 87B GennLab 1 kHz Track Alignment Cassette Version 87B The Cassette is recorded for the Playback Head Height calibration of Nakamichi cassette decks. Adjust Playback Head Height Gear to obtain the MINIMUM reading of the Output Signal for both channels. Please note. This new Cassette can now be used to adjust all other brands of cassette tape deck equipped with adjustable Tape Guides NOT permanently attached to the head. The Tape is recorded on new TDK 18u tape OFF SHELL using the OTARI 0.15 (3.81 mm) Reel-to-Reel MX-5050BIII-1-P2/1 Production tape recorder and professional test equipment.This tape recorder, is equipped with the Focused-Field Narrow Track Instrumental Record Heads and has precisely machined Tape Guides. This provides an extremely stable Track position on the tape. The 1 kHz Track is recorded at the END of tape starting at the last 5 minutes. The 87B version of the Tape is equivalent to Nakamichi DA09087B Test Tapes. It can be used to calibrate Nakamichi decks equipped with Playback Head with wide gap between channels: CR Series (CR-3, CR-4, CR-7), BX-300, Dragon etc. FYI, The Japanese ABEX stopped the production and sales of ALL test cassettes in October 2010

1 kHz Track Alignment Cassette 87B GennLab 1 kHz Track Alignment Cassette Version 87B The Cassette is recorded for the Playback Head Height calibration of Nakamichi cassette decks. Adjust Playback Head Height Gear to obtain the MINIMUM reading of the Output Signal for both channels. Please note. This new Cassette can now be used to adjust all other brands of cassette tape deck equipped with adjustable Tape Guides NOT permanently attached to the head. The Tape is recorded on new TDK 18u tape OFF SHELL using the OTARI 0.15 (3.81 mm) Reel-to-Reel MX-5050BIII-1-P2/1 Production tape recorder and professional test equipment.This tape recorder, is equipped with the Focused-Field Narrow Track Instrumental Record Heads and has precisely machined Tape Guides. This provides an extremely stable Track position on the tape. The 1 kHz Track is recorded at the END of tape starting at the last 5 minutes. The 87B version of the Tape is equivalent to Nakamichi DA09087B Test Tapes. It can be used to calibrate Nakamichi decks equipped with Playback Head with wide gap between channels: CR Series (CR-3, CR-4, CR-7), BX-300, Dragon etc. FYI, The Japanese ABEX stopped the production and sales of ALL test cassettes in October 2010

1 kHz Track Alignment Cassette 07A GennLab 1 kHz Track Alignment Cassette Version 07A The Cassette is recorded for the Playback Head Height calibration of Nakamichi cassette decks. Adjust Playback Head Height Gear to obtain the MINIMUM reading of the Output Signal for both channels. Please note. This new Cassette can now be used to adjust all other brands of cassette tape deck equipped with adjustable Tape Guides NOT permanently attached to the head. The Tape is recorded on new TDK 18u tape OFF SHELL using the OTARI 0.15 (3.81 mm) Reel-to-Reel MX-5050BIII-1-P2/1 Production tape recorder and professional test equipment.This tape recorder, is equipped with the Focused-Field Narrow Track Instrumental Record Heads and has precisely machined Tape Guides. This provides an extremely stable Track position on the tape. The 1 kHz Track is recorded at the END of tape starting at the last 5 minutes. The 07A version of the Tape is equivalent to Nakamichi DA09007A Test Tapes. It can be used to calibrate Nakamichi decks equipped with Playback Head with narrow gap between channels: 480, 481, 482Z, 582, 582Z, 600, 600II, 660ZX, 670ZX, 680ZX, 682ZX, 700, 700II, 700ZXE, 700ZXL, 1000II, 1000ZXL, ZX-3, ZX7, ZX9. FYI, The Japanese ABEX stopped the production and sales of ALL test cassettes in October 2010

1 kHz Track Alignment Cassette 87B GennLab 1 kHz Track Alignment Cassette Version 87B The Cassette is recorded for the Playback Head Height calibration of Nakamichi cassette decks. Adjust Playback Head Height Gear to obtain the MINIMUM reading of the Output Signal for both channels. Please note. This new Cassette can now be used to adjust all other brands of cassette tape deck equipped with adjustable Tape Guides NOT permanently attached to the head. The Tape is recorded on new TDK 18u tape OFF SHELL using the OTARI 0.15 (3.81 mm) Reel-to-Reel MX-5050BIII-1-P2/1 Production tape recorder and professional test equipment.This tape recorder, is equipped with the Focused-Field Narrow Track Instrumental Record Heads and has precisely machined Tape Guides. This provides an extremely stable Track position on the tape. The 1 kHz Track is recorded at the END of tape starting at the last 5 minutes. The 87B version of the Tape is equivalent to Nakamichi DA09087B Test Tapes. It can be used to calibrate Nakamichi decks equipped with Playback Head with wide gap between channels: CR Series (CR-3, CR-4, CR-7), BX-300, Dragon etc. FYI, The Japanese ABEX stopped the production and sales of ALL test cassettes in October 2010

1 kHz Track Alignment Cassette 07A GennLab 1 kHz Track Alignment Cassette Version 07A The Cassette is recorded for the Playback Head Height calibration of Nakamichi cassette decks. Adjust Playback Head Height Gear to obtain the MINIMUM reading of the Output Signal for both channels. Please note. This new Cassette can now be used to adjust all other brands of cassette tape deck equipped with adjustable Tape Guides NOT permanently attached to the head. The Tape is recorded on new TDK 18u tape OFF SHELL using the OTARI 0.15 (3.81 mm) Reel-to-Reel MX-5050BIII-1-P2/1 Production tape recorder and professional test equipment.This tape recorder, is equipped with the Focused-Field Narrow Track Instrumental Record Heads and has precisely machined Tape Guides. This provides an extremely stable Track position on the tape. The 1 kHz Track is recorded at the END of tape starting at the last 5 minutes. The 07A version of the Tape is equivalent to Nakamichi DA09007A Test Tapes. It can be used to calibrate Nakamichi decks equipped with Playback Head with narrow gap between channels: 480, 481, 482Z, 582, 582Z, 600, 600II, 660ZX, 670ZX, 680ZX, 682ZX, 700, 700II, 700ZXE, 700ZXL, 1000II, 1000ZXL, ZX-3, ZX7, ZX9. FYI, The Japanese ABEX stopped the production and sales of ALL test cassettes in October 2010

Cassette Tape Transport Alignment Gauge.Aluminum alloy. Gebraucht. Weitere Details siehe Bilder.Sie bekommen genau das, was auf den Original Fotos abgebildet ist. Da Privatverkauf keine Garantie / Gewährleistung sowie kein Rückgaberecht.

1 kHz Track Alignment Cassette 07A GennLab 1 kHz Track Alignment Cassette Version 07A The Cassette is recorded for the Playback Head Height calibration of Nakamichi cassette decks. Adjust Playback Head Height Gear to obtain the MINIMUM reading of the Output Signal for both channels. Please note. This new Cassette can now be used to adjust all other brands of cassette tape deck equipped with adjustable Tape Guides NOT permanently attached to the head. The Tape is recorded on new TDK 18u tape OFF SHELL using the OTARI 0.15 (3.81 mm) Reel-to-Reel MX-5050BIII-1-P2/1 Production tape recorder and professional test equipment.This tape recorder, is equipped with the Focused-Field Narrow Track Instrumental Record Heads and has precisely machined Tape Guides. This provides an extremely stable Track position on the tape. The 1 kHz Track is recorded at the END of tape starting at the last 5 minutes. The 07A version of the Tape is equivalent to Nakamichi DA09007A Test Tapes. It can be used to calibrate Nakamichi decks equipped with Playback Head with narrow gap between channels: 480, 481, 482Z, 582, 582Z, 600, 600II, 660ZX, 670ZX, 680ZX, 682ZX, 700, 700II, 700ZXE, 700ZXL, 1000II, 1000ZXL, ZX-3, ZX7, ZX9. FYI, The Japanese ABEX stopped the production and sales of ALL test cassettes in October 2010

1 kHz Track Alignment Cassette 87B GennLab 1 kHz Track Alignment Cassette Version 87B The Cassette is recorded for the Playback Head Height calibration of Nakamichi cassette decks. Adjust Playback Head Height Gear to obtain the MINIMUM reading of the Output Signal for both channels. Please note. This new Cassette can now be used to adjust all other brands of cassette tape deck equipped with adjustable Tape Guides NOT permanently attached to the head. The Tape is recorded on new TDK 18u tape OFF SHELL using the OTARI 0.15 (3.81 mm) Reel-to-Reel MX-5050BIII-1-P2/1 Production tape recorder and professional test equipment.This tape recorder, is equipped with the Focused-Field Narrow Track Instrumental Record Heads and has precisely machined Tape Guides. This provides an extremely stable Track position on the tape. The 1 kHz Track is recorded at the END of tape starting at the last 5 minutes. The 87B version of the Tape is equivalent to Nakamichi DA09087B Test Tapes. It can be used to calibrate Nakamichi decks equipped with Playback Head with wide gap between channels: CR Series (CR-3, CR-4, CR-7), BX-300, Dragon etc. FYI, The Japanese ABEX stopped the production and sales of ALL test cassettes in October 2010

1 kHz Track Alignment Cassette 87B GennLab 1 kHz Track Alignment Cassette Version 87B The Cassette is recorded for the Playback Head Height calibration of Nakamichi cassette decks. Adjust Playback Head Height Gear to obtain the MINIMUM reading of the Output Signal for both channels. Please note. This new Cassette can now be used to adjust all other brands of cassette tape deck equipped with adjustable Tape Guides NOT permanently attached to the head. The Tape is recorded on new TDK 18u tape OFF SHELL using the OTARI 0.15 (3.81 mm) Reel-to-Reel MX-5050BIII-1-P2/1 Production tape recorder and professional test equipment.This tape recorder, is equipped with the Focused-Field Narrow Track Instrumental Record Heads and has precisely machined Tape Guides. This provides an extremely stable Track position on the tape. The 1 kHz Track is recorded at the END of tape starting at the last 5 minutes. The 87B version of the Tape is equivalent to Nakamichi DA09087B Test Tapes. It can be used to calibrate Nakamichi decks equipped with Playback Head with wide gap between channels: CR Series (CR-3, CR-4, CR-7), BX-300, Dragon etc. FYI, The Japanese ABEX stopped the production and sales of ALL test cassettes in October 2010

1 kHz Track Alignment Cassette 07A GennLab 1 kHz Track Alignment Cassette Version 07A The Cassette is recorded for the Playback Head Height calibration of Nakamichi cassette decks. Adjust Playback Head Height Gear to obtain the MINIMUM reading of the Output Signal for both channels. Please note. This new Cassette can now be used to adjust all other brands of cassette tape deck equipped with adjustable Tape Guides NOT permanently attached to the head. The Tape is recorded on new TDK 18u tape OFF SHELL using the OTARI 0.15 (3.81 mm) Reel-to-Reel MX-5050BIII-1-P2/1 Production tape recorder and professional test equipment.This tape recorder, is equipped with the Focused-Field Narrow Track Instrumental Record Heads and has precisely machined Tape Guides. This provides an extremely stable Track position on the tape. The 1 kHz Track is recorded at the END of tape starting at the last 5 minutes. The 07A version of the Tape is equivalent to Nakamichi DA09007A Test Tapes. It can be used to calibrate Nakamichi decks equipped with Playback Head with narrow gap between channels: 480, 481, 482Z, 582, 582Z, 600, 600II, 660ZX, 670ZX, 680ZX, 682ZX, 700, 700II, 700ZXE, 700ZXL, 1000II, 1000ZXL, ZX-3, ZX7, ZX9. FYI, The Japanese ABEX stopped the production and sales of ALL test cassettes in October 2010

1 kHz Track Alignment Cassette 07A GennLab 1 kHz Track Alignment Cassette Version 07A The Cassette is recorded for the Playback Head Height calibration of Nakamichi cassette decks. Adjust Playback Head Height Gear to obtain the MINIMUM reading of the Output Signal for both channels. Please note. This new Cassette can now be used to adjust all other brands of cassette tape deck equipped with adjustable Tape Guides NOT permanently attached to the head. The Tape is recorded on new TDK 18u tape OFF SHELL using the OTARI 0.15 (3.81 mm) Reel-to-Reel MX-5050BIII-1-P2/1 Production tape recorder and professional test equipment.This tape recorder, is equipped with the Focused-Field Narrow Track Instrumental Record Heads and has precisely machined Tape Guides. This provides an extremely stable Track position on the tape. The 1 kHz Track is recorded at the END of tape starting at the last 5 minutes. The 07A version of the Tape is equivalent to Nakamichi DA09007A Test Tapes. It can be used to calibrate Nakamichi decks equipped with Playback Head with narrow gap between channels: 480, 481, 482Z, 582, 582Z, 600, 600II, 660ZX, 670ZX, 680ZX, 682ZX, 700, 700II, 700ZXE, 700ZXL, 1000II, 1000ZXL, ZX-3, ZX7, ZX9. FYI, The Japanese ABEX stopped the production and sales of ALL test cassettes in October 2010

1 kHz Track Alignment Cassette 87B GennLab 1 kHz Track Alignment Cassette Version 87B The Cassette is recorded for the Playback Head Height calibration of Nakamichi cassette decks. Adjust Playback Head Height Gear to obtain the MINIMUM reading of the Output Signal for both channels. Please note. This new Cassette can now be used to adjust all other brands of cassette tape deck equipped with adjustable Tape Guides NOT permanently attached to the head. The Tape is recorded on new TDK 18u tape OFF SHELL using the OTARI 0.15 (3.81 mm) Reel-to-Reel MX-5050BIII-1-P2/1 Production tape recorder and professional test equipment.This tape recorder, is equipped with the Focused-Field Narrow Track Instrumental Record Heads and has precisely machined Tape Guides. This provides an extremely stable Track position on the tape. The 1 kHz Track is recorded at the END of tape starting at the last 5 minutes. The 87B version of the Tape is equivalent to Nakamichi DA09087B Test Tapes. It can be used to calibrate Nakamichi decks equipped with Playback Head with wide gap between channels: CR Series (CR-3, CR-4, CR-7), BX-300, Dragon etc. FYI, The Japanese ABEX stopped the production and sales of ALL test cassettes in October 2010

1 kHz Track Alignment Cassette 87B GennLab 1 kHz Track Alignment Cassette Version 87B The Cassette is recorded for the Playback Head Height calibration of Nakamichi cassette decks. Adjust Playback Head Height Gear to obtain the MINIMUM reading of the Output Signal for both channels. Please note. This new Cassette can now be used to adjust all other brands of cassette tape deck equipped with adjustable Tape Guides NOT permanently attached to the head. The Tape is recorded on new TDK 18u tape OFF SHELL using the OTARI 0.15 (3.81 mm) Reel-to-Reel MX-5050BIII-1-P2/1 Production tape recorder and professional test equipment.This tape recorder, is equipped with the Focused-Field Narrow Track Instrumental Record Heads and has precisely machined Tape Guides. This provides an extremely stable Track position on the tape. The 1 kHz Track is recorded at the END of tape starting at the last 5 minutes. The 87B version of the Tape is equivalent to Nakamichi DA09087B Test Tapes. It can be used to calibrate Nakamichi decks equipped with Playback Head with wide gap between channels: CR Series (CR-3, CR-4, CR-7), BX-300, Dragon etc. FYI, The Japanese ABEX stopped the production and sales of ALL test cassettes in October 2010

1 kHz Track Alignment Cassette 07A GennLab 1 kHz Track Alignment Cassette Version 07A The Cassette is recorded for the Playback Head Height calibration of Nakamichi cassette decks. Adjust Playback Head Height Gear to obtain the MINIMUM reading of the Output Signal for both channels. Please note. This new Cassette can now be used to adjust all other brands of cassette tape deck equipped with adjustable Tape Guides NOT permanently attached to the head. The Tape is recorded on new TDK 18u tape OFF SHELL using the OTARI 0.15 (3.81 mm) Reel-to-Reel MX-5050BIII-1-P2/1 Production tape recorder and professional test equipment.This tape recorder, is equipped with the Focused-Field Narrow Track Instrumental Record Heads and has precisely machined Tape Guides. This provides an extremely stable Track position on the tape. The 1 kHz Track is recorded at the END of tape starting at the last 5 minutes. The 07A version of the Tape is equivalent to Nakamichi DA09007A Test Tapes. It can be used to calibrate Nakamichi decks equipped with Playback Head with narrow gap between channels: 480, 481, 482Z, 582, 582Z, 600, 600II, 660ZX, 670ZX, 680ZX, 682ZX, 700, 700II, 700ZXE, 700ZXL, 1000II, 1000ZXL, ZX-3, ZX7, ZX9. FYI, The Japanese ABEX stopped the production and sales of ALL test cassettes in October 2010

1 kHz Track Alignment Cassette 07A GennLab 1 kHz Track Alignment Cassette Version 07A The Cassette is recorded for the Playback Head Height calibration of Nakamichi cassette decks. Adjust Playback Head Height Gear to obtain the MINIMUM reading of the Output Signal for both channels. Please note. This new Cassette can now be used to adjust all other brands of cassette tape deck equipped with adjustable Tape Guides NOT permanently attached to the head. The Tape is recorded on new TDK 18u tape OFF SHELL using the OTARI 0.15 (3.81 mm) Reel-to-Reel MX-5050BIII-1-P2/1 Production tape recorder and professional test equipment.This tape recorder, is equipped with the Focused-Field Narrow Track Instrumental Record Heads and has precisely machined Tape Guides. This provides an extremely stable Track position on the tape. The 1 kHz Track is recorded at the END of tape starting at the last 5 minutes. The 07A version of the Tape is equivalent to Nakamichi DA09007A Test Tapes. It can be used to calibrate Nakamichi decks equipped with Playback Head with narrow gap between channels: 480, 481, 482Z, 582, 582Z, 600, 600II, 660ZX, 670ZX, 680ZX, 682ZX, 700, 700II, 700ZXE, 700ZXL, 1000II, 1000ZXL, ZX-3, ZX7, ZX9. FYI, The Japanese ABEX stopped the production and sales of ALL test cassettes in October 2010

1 kHz Track Alignment Cassette 87B GennLab 1 kHz Track Alignment Cassette Version 87B The Cassette is recorded for the Playback Head Height calibration of Nakamichi cassette decks. Adjust Playback Head Height Gear to obtain the MINIMUM reading of the Output Signal for both channels. Please note. This new Cassette can now be used to adjust all other brands of cassette tape deck equipped with adjustable Tape Guides NOT permanently attached to the head. The Tape is recorded on new TDK 18u tape OFF SHELL using the OTARI 0.15 (3.81 mm) Reel-to-Reel MX-5050BIII-1-P2/1 Production tape recorder and professional test equipment.This tape recorder, is equipped with the Focused-Field Narrow Track Instrumental Record Heads and has precisely machined Tape Guides. This provides an extremely stable Track position on the tape. The 1 kHz Track is recorded at the END of tape starting at the last 5 minutes. The 87B version of the Tape is equivalent to Nakamichi DA09087B Test Tapes. It can be used to calibrate Nakamichi decks equipped with Playback Head with wide gap between channels: CR Series (CR-3, CR-4, CR-7), BX-300, Dragon etc. FYI, The Japanese ABEX stopped the production and sales of ALL test cassettes in October 2010

1 kHz Track Alignment Cassette 87B GennLab 1 kHz Track Alignment Cassette Version 87B The Cassette is recorded for the Playback Head Height calibration of Nakamichi cassette decks. Adjust Playback Head Height Gear to obtain the MINIMUM reading of the Output Signal for both channels. Please note. This new Cassette can now be used to adjust all other brands of cassette tape deck equipped with adjustable Tape Guides NOT permanently attached to the head. The Tape is recorded on new TDK 18u tape OFF SHELL using the OTARI 0.15 (3.81 mm) Reel-to-Reel MX-5050BIII-1-P2/1 Production tape recorder and professional test equipment.This tape recorder, is equipped with the Focused-Field Narrow Track Instrumental Record Heads and has precisely machined Tape Guides. This provides an extremely stable Track position on the tape. The 1 kHz Track is recorded at the END of tape starting at the last 5 minutes. The 87B version of the Tape is equivalent to Nakamichi DA09087B Test Tapes. It can be used to calibrate Nakamichi decks equipped with Playback Head with wide gap between channels: CR Series (CR-3, CR-4, CR-7), BX-300, Dragon etc. FYI, The Japanese ABEX stopped the production and sales of ALL test cassettes in October 2010

1 kHz Track Alignment Cassette 07A GennLab 1 kHz Track Alignment Cassette Version 07A The Cassette is recorded for the Playback Head Height calibration of Nakamichi cassette decks. Adjust Playback Head Height Gear to obtain the MINIMUM reading of the Output Signal for both channels. Please note. This new Cassette can now be used to adjust all other brands of cassette tape deck equipped with adjustable Tape Guides NOT permanently attached to the head. The Tape is recorded on new TDK 18u tape OFF SHELL using the OTARI 0.15 (3.81 mm) Reel-to-Reel MX-5050BIII-1-P2/1 Production tape recorder and professional test equipment.This tape recorder, is equipped with the Focused-Field Narrow Track Instrumental Record Heads and has precisely machined Tape Guides. This provides an extremely stable Track position on the tape. The 1 kHz Track is recorded at the END of tape starting at the last 5 minutes. The 07A version of the Tape is equivalent to Nakamichi DA09007A Test Tapes. It can be used to calibrate Nakamichi decks equipped with Playback Head with narrow gap between channels: 480, 481, 482Z, 582, 582Z, 600, 600II, 660ZX, 670ZX, 680ZX, 682ZX, 700, 700II, 700ZXE, 700ZXL, 1000II, 1000ZXL, ZX-3, ZX7, ZX9. FYI, The Japanese ABEX stopped the production and sales of ALL test cassettes in October 2010

1 kHz Track Alignment Cassette 07A GennLab 1 kHz Track Alignment Cassette Version 07A The Cassette is recorded for the Playback Head Height calibration of Nakamichi cassette decks. Adjust Playback Head Height Gear to obtain the MINIMUM reading of the Output Signal for both channels. Please note. This new Cassette can now be used to adjust all other brands of cassette tape deck equipped with adjustable Tape Guides NOT permanently attached to the head. The Tape is recorded on new TDK 18u tape OFF SHELL using the OTARI 0.15 (3.81 mm) Reel-to-Reel MX-5050BIII-1-P2/1 Production tape recorder and professional test equipment.This tape recorder, is equipped with the Focused-Field Narrow Track Instrumental Record Heads and has precisely machined Tape Guides. This provides an extremely stable Track position on the tape. The 1 kHz Track is recorded at the END of tape starting at the last 5 minutes. The 07A version of the Tape is equivalent to Nakamichi DA09007A Test Tapes. It can be used to calibrate Nakamichi decks equipped with Playback Head with narrow gap between channels: 480, 481, 482Z, 582, 582Z, 600, 600II, 660ZX, 670ZX, 680ZX, 682ZX, 700, 700II, 700ZXE, 700ZXL, 1000II, 1000ZXL, ZX-3, ZX7, ZX9. FYI, The Japanese ABEX stopped the production and sales of ALL test cassettes in October 2010

1 kHz Track Alignment Cassette 87B GennLab 1 kHz Track Alignment Cassette Version 87B The Cassette is recorded for the Playback Head Height calibration of Nakamichi cassette decks. Adjust Playback Head Height Gear to obtain the MINIMUM reading of the Output Signal for both channels. Please note. This new Cassette can now be used to adjust all other brands of cassette tape deck equipped with adjustable Tape Guides NOT permanently attached to the head. The Tape is recorded on new TDK 18u tape OFF SHELL using the OTARI 0.15 (3.81 mm) Reel-to-Reel MX-5050BIII-1-P2/1 Production tape recorder and professional test equipment.This tape recorder, is equipped with the Focused-Field Narrow Track Instrumental Record Heads and has precisely machined Tape Guides. This provides an extremely stable Track position on the tape. The 1 kHz Track is recorded at the END of tape starting at the last 5 minutes. The 87B version of the Tape is equivalent to Nakamichi DA09087B Test Tapes. It can be used to calibrate Nakamichi decks equipped with Playback Head with wide gap between channels: CR Series (CR-3, CR-4, CR-7), BX-300, Dragon etc. FYI, The Japanese ABEX stopped the production and sales of ALL test cassettes in October 2010

1 kHz Track Alignment Cassette 87B GennLab 1 kHz Track Alignment Cassette Version 87B The Cassette is recorded for the Playback Head Height calibration of Nakamichi cassette decks. Adjust Playback Head Height Gear to obtain the MINIMUM reading of the Output Signal for both channels. Please note. This new Cassette can now be used to adjust all other brands of cassette tape deck equipped with adjustable Tape Guides NOT permanently attached to the head. The Tape is recorded on new TDK 18u tape OFF SHELL using the OTARI 0.15 (3.81 mm) Reel-to-Reel MX-5050BIII-1-P2/1 Production tape recorder and professional test equipment.This tape recorder, is equipped with the Focused-Field Narrow Track Instrumental Record Heads and has precisely machined Tape Guides. This provides an extremely stable Track position on the tape. The 1 kHz Track is recorded at the END of tape starting at the last 5 minutes. The 87B version of the Tape is equivalent to Nakamichi DA09087B Test Tapes. It can be used to calibrate Nakamichi decks equipped with Playback Head with wide gap between channels: CR Series (CR-3, CR-4, CR-7), BX-300, Dragon etc. FYI, The Japanese ABEX stopped the production and sales of ALL test cassettes in October 2010