Acurus by Mondial A-200X3 Endstufe im guten Zustand mit leichten Gebrauchsspuren! Technische Daten Leistung: 200 Watt pro Kanal dauernd, 3 Kanäle belastet mit 8 Ohm 20 Hz bis 20 kHz nicht mehr als 0.06% THD 250 Watt pro Kanal dauernd , 3 Kanäle belastet mit 4 Ohm 20 Hz bis 20 kHz Eingangs Impedanz: 20 k Ohm Signal to Noise Ratio: 110 dBA Weighted Eingangsempfindlichkeit: 1.1 Volt für Nennleistung Maße: 43,2 cm Breit 17,8 cm Hoch 38,1 cm Tief Gewicht: 21,5 kg Versand möglich, aber teuer wegen dem hohen Gewicht! Am liebsten wäre mir Abholung!

Up for auction is an ACURUS 200X3, power amplifier. The amplifier has 3 channels at 200W RMS/channel and two large power supply filter caps at 24000uF each. The unit is in almost excellent condition, considering the age (see the pictures). This is a 120V model, S/N 7158. All the questions are very welcome. I moved recently in US from Greece, where I was working in Greek Nakamichi service during 90s and I have all the professional equipment (original test tapes, oscilloscope, wow & flutter meter, distortion meter, frequency response meter, CR-7 test unit, 1000ZXL test unit). If you need to service your deck Ill be happy to help you, 7085281523. See also my other items and my feedback. Thank you for looking.

awesome shape, no dents or dings, works perfect, flaws shown in pics

ACURUS 200X3 THREE CHANNEL POWER AMPLIFIER Perfect Working Condition. NOTES: We appreciate your business and want to make sure you’re always 100% satisfied with your product! IF YOU HAVE ANY ISSUE: We kindly ask that you please first message us to work out any issue/concern as our team will assist you asap (usually within 24 hours M-F) WHATS INCLUDED: Please review pictures prior to purchase. ONLY comes with what's pictured. Products will not come with a power adapter unless shown or mentioned in the listing.

Up for sale is my Acurus A200X3 amplifier. 200W per channel @ 8-Ohms. 350W per channel @ 4-Ohms. Made in the USA by Mondial, the same company that makes the renowned Krell brand. Glass epoxy circuit board (not paper). Fully discrete solid state devices (not low cost integrated circuits). Higher cost metal film resistors (not cheaper carbon resistors). High gauge metal chassis with permanently attached nuts and machine screws (not sheet metal screws). An Audiokarma discussion on the product is found with a web search articulating well all of the quality built into this amp. Item will be packaged and protected very well. Check my feedback and buy with confidence...

The Acurus 200X3 is a high end amplifier of exceptional smoothness. This smoothness is not achieved at the expense of detail. The ability to retrieve detail found within the original source has actually been improved. The Symmetrical Channel Configuration reduces harshness and inter-channel anomalies allowing for the increased smoothness and detail. The glass epoxy circuit board employed are found in medical and military equipment. The amplifier has heavy gauge copper wire toroidal transformers for continuous power into lower impedance real world speaker loads. The power reserves are immense to the extent that even after the amplifier is turned off, the music keeps on playing for a few minutes until it slowly fusses out. The amplifier has efficient thermal management and can be played for hours without getting hot. The Acurus 200X3 will not be able to drive very low efficiency speakers such as ribbon/planar type speakers which has impedance of 2 ohms or lower. However, it can drive most 8 ohms speakers with ease and plenty of 4 ohms speakers easily. The sonic qualities of the Acurus 200X3 are characterized as revealing, and forward but not grainy. The bass is powerful and tight, the midrange is smooth and warm, and the highs are appealing and sweet. It is able to play with the most subtle delicacy at a moment, then play at shattering volumes with no strain, and produces a wide and terrific soundstage. The vocals are slightly warm, but when listening to brass instruments it can sometimes become harsh and fatiguing. Drums seem to have vigor and comes alive with the music and cymbal crashes resonate with crispness. The Acurus 200X3 is a capable preamplifier of superb build quality and delivers high end experience time to time without fail. Specifications : Rated Power(200 watts)....................Continuous into 8 ohms, 20Hz to 20kHz, ....................0.005% intermodulation distortion ....................No more than 0.06% total harmonic distortion Rated Power(300 watts)....................Continuous into 4 ohms, 20Hz to 20kHz ....................No more than 0.03% total harmonic distortion Signal-to-Noise Ratio........................110dB A-weighted Power Consumption.........................1,200 watts, all three channels driven at rated power Quiescent Power Consumption..........75 watts, all three channels with no signal Input Sensitivity................................1.1V for full rated power Input Impedance..............................20k ohms Frequency Response........................20Hz to 20kHz, +/- 0.1dB .......................10Hz to 100kHz, +/- 0.5dB .......................1Hz to 130kHz, +/- 0.1dB Channel Separation..........................90dB Damping Factor................................8 ohms, 50Hz: 500 Dimensions(w x d x h)......................48.5 x 35.5 x 16 cm Weight............................................15kg Miscellaneous : Made In...........................................USA Condition.........................................8/10 Product Information : http://www.hbassociates.us/Acurusamps.pdf (Brochure) Reviews : http://www.audioreview.com/cat/amplification/amplifiers/acurus/a200x3/prd_115528_1583crx.aspx http://www.avsforum.com/t/1319601/my-acurus-a200x3-arrived-today

The Acurus 200X3 is a high end amplifier of exceptional smoothness. This smoothness is not achieved at the expense of detail. The ability to retrieve detail found within the original source has actually been improved. The Symmetrical Channel Configuration reduces harshness and inter-channel anomalies allowing for the increased smoothness and detail. The glass epoxy circuit board employed are found in medical and military equipment. The amplifier has heavy gauge copper wire toroidal transformers for continuous power into lower impedance real world speaker loads. The power reserves are immense to the extent that even after the amplifier is turned off, the music keeps on playing for a few minutes until it slowly fusses out. The amplifier has efficient thermal management and can be played for hours without getting hot. The Acurus 200X3 will not be able to drive very low efficiency speakers such as ribbon/planar type speakers which has impedance of 2 ohms or lower. However, it can drive most 8 ohms speakers with ease and plenty of 4 ohms speakers easily. The sonic qualities of the Acurus 200X3 are characterized as revealing, and forward but not grainy. The bass is powerful and tight, the midrange is smooth and warm, and the highs are appealing and sweet. It is able to play with the most subtle delicacy at a moment, then play at shattering volumes with no strain, and produces a wide and terrific soundstage. The vocals are slightly warm, but when listening to brass instruments it can sometimes become harsh and fatiguing. Drums seem to have vigor and comes alive with the music and cymbal crashes resonate with crispness. The Acurus 200X3 is a capable preamplifier of superb build quality and delivers high end experience time to time without fail. Specifications : Rated Power(200 watts)....................Continuous into 8 ohms, 20Hz to 20kHz, ....................0.005% intermodulation distortion ....................No more than 0.06% total harmonic distortion Rated Power(300 watts)....................Continuous into 4 ohms, 20Hz to 20kHz ....................No more than 0.03% total harmonic distortion Signal-to-Noise Ratio........................110dB A-weighted Power Consumption.........................1,200 watts, all three channels driven at rated power Quiescent Power Consumption..........75 watts, all three channels with no signal Input Sensitivity................................1.1V for full rated power Input Impedance..............................20k ohms Frequency Response........................20Hz to 20kHz, +/- 0.1dB .......................10Hz to 100kHz, +/- 0.5dB .......................1Hz to 130kHz, +/- 0.1dB Channel Separation..........................90dB Damping Factor................................8 ohms, 50Hz: 500 Dimensions(w x d x h)......................48.5 x 35.5 x 16 cm Weight............................................15kg Miscellaneous : Made In...........................................USA Condition.........................................8/10 Product Information : http://www.hbassociates.us/Acurusamps.pdf (Brochure) Reviews : http://www.audioreview.com/cat/amplification/amplifiers/acurus/a200x3/prd_115528_1583crx.aspx http://www.avsforum.com/t/1319601/my-acurus-a200x3-arrived-today