Tested Good working . Shipping us only.

Pair of B&W 801 matrix series 2 aniversary edition.crossovers. Were pulled from a working pair of speakers. Changed due to an upgrade. Will pack carefully and ship insured free of charge.

Up for sale is a pair of Jamo S 801 Bookshelf Speakers, Black, in excellent condition. The speakers were used for about six months before I upgraded to a pair of S 803s. The speakers come from a pet-free, smoke-free household. One of the speakers has a small scratch in the top corner (see pictures), but other than that, the speakers are in excellent working condition; speakers will be shipped via USPS with tracking numbers to the lower 48 states only. Good luck and happy bidding!

Up for sale is a pair of Jamo S 801 Bookshelf Speakers, Black, in excellent condition. The speakers were used for about six months before I upgraded to a pair of S 803s. The speakers come from a pet-free, smoke-free household. One of the speakers has a small scratch in the top corner (see pictures), but other than that, the speakers are in excellent working condition; speakers will be shipped via USPS with tracking numbers to the lower 48 states only. Good luck and happy bidding!

Daiwa CN-801 Professional Series Bench Meters. Frequency Range 1.8-200MHz. SWR/Wattmeter, 1.8-200 MHz, 2,000 W Max., Cross Needle, UHF Female, SO-239, 13.8 Vdc, Each.

TIVO Series 4 Premiere Power Supply for Models TCD746320, TCD746500, and TCD748000. Board # ST8015. This was tested under a load in a working TiVo unit by a qualified technician. Each board was under test for at least 1 hour to verify it worked under normal operating temperature. Since I cannot test your individual TiVo to verify your power supply is indeed the cause of your problem, I cannot guarantee this replacement power supply will repair your non functional TiVo. You will need to verify that either your board’s fuse is open, or that your board is not putting out the correct voltages. This item is being sold as is.

TIVO Series 4 Power Supply ST8015 for Models TCD746320 TCD746500 TCD748000.

Sams Photofact Tape Recorder Series TR-18 Aug 1965. Original factory issued manual. Large & heavy at 159 pages. In good condition Include a stiff cardboard insert and a Please Do Not Bend sticker to help maintain the integrity of the manual.

TIVO Series 4 Power Supply ST8015 for Models TCD746320 TCD746500 TCD748000.

2 x B&W Bowers & Wilkins Matrix 801 Series 3 Generic Replacement Tweeter Loudspeakers Coils Foils.Always fit in pairs, that way they will look exactly the same & they will also sound exactly the same.You are buying a pair of generic replacement tweeter coils & foils (as seen on these pictures) to fit the bowers & wilkins matrix 800 series loudspeakers.They are a very good replacement for your old blown or dented tweeters.Dependant on when exactly your tweeters were made, these will either slot straight into place or you will find they are about 1.5mm wider that the slot for them.If they are slightly wider, then all you need to do is to put a very thin edge of superglue around the edge of your plastic tweeter surround (use the tip of a cotton bud) & then place the tweeter coil - foil in place using the magnet part of your complete unit to line it up while the glue sets.BEFORE you first open the tweeter up make sure that you mark the position of both parts of the tweeter, they slot together in a certain place & marking them before opening them will save you loads of time & agro later on.You will need the following tools to fit these.A philips screwdriver (small - medium head)A flathead screwdriver (small - medium head)A soldering iron & solder.Some superglug & a cotton bud.These replacement tweeter coils & foils can be used with many bowers & wilkins loudspeakers.You will need a steady hand, a fair degree of common sence (like do not glue into place until you have made sure it fits together correctly) & a few minutes spare time when fitting these.REMEMBER, THEY ARE VERY DELICATE, NO RETURNS ON ANY COILS - FOILS THAT YOU DAMAGE WHILST FITTING THEM.RETURNS ON BRAND NEW NOT FITTED COILS - FOILS ONLY.If you are not still not sure about fitting these, in the first instance have a look on youtube, you will be able to find videos on there showing what to do.If you still have issues, then send an email through ebay messaging to us, we will attempt to get back to you within 24hrs (we are NOT sat on the computer 24/7)FREE UK SHIPPING ON THIS ITEM.All items are sent by signed for & recorded delivery.

TIVO Series 4 Power Supply ST8015 for Models TCD746320 TCD746500 TCD748000.

TIVO Series 4 Power Supply ST8015 for Models TCD746320 TCD746500 TCD748000.

TIVO Series 4 Power Supply ST8015 for Models TCD746320 TCD746500 TCD748000.

Samsung HW-S801B S-Series Ultra Slim 3.1.2ch Soundbar With True Dolby Atmos BNIB. Brand new, unwanted part of deal. Retail 649

B&W MODEL 801/2 LOUDSPEAKERS (Sales Brochures) Series 80 Pre-Release information Sales brochures in mint condition (1979) ------------------------------ Thanks for looking.

B&W MODEL 801/2 LOUDSPEAKERS (Sales Brochures) Series 80 Pre-Release information Sales brochures in mint condition (1979) ------------------------------ Thanks for looking.

2 x Bowers Wilkins 801 Series 80 Generic Replacement Tweeter Loudspeakers Coils.Always fit in pairs, that way they will look exactly the same & they will also sound exactly the same.You are buying a pair of generic replacement tweeter coils & foils (as seen on these pictures) to fit the bowers & wilkins Matrix 2 loudspeakers.They are a very good replacement for your old blown or dented tweeters.Dependant on when exactly your tweeters were made, these will either slot straight into place or you will find they are about 1.5mm wider that the slot for them.If they are slightly wider, then all you need to do is to put a very thin edge of superglue around the edge of your plastic tweeter surround (use the tip of a cotton bud) & then place the tweeter coil - foil in place using the magnet part of your complete unit to line it up while the glue sets.BEFORE you first open the tweeter up make sure that you mark the position of both parts of the tweeter, they slot together in a certain place & marking them before opening them will save you loads of time & agro later on.You will need the following tools to fit these.A philips screwdriver (small - medium head)A flathead screwdriver (small - medium head)A soldering iron & solder.Some superglug & a cotton bud.These replacement tweeter coils & foils can be used with many bowers & wilkins loudspeakers.You will need a steady hand, a fair degree of common sence (like do not glue into place until you have made sure it fits together correctly) & a few minutes spare time when fitting these.REMEMBER, THEY ARE VERY DELICATE, NO RETURNS ON ANY COILS - FOILS THAT YOU DAMAGE WHILST FITTING THEM.RETURNS ON BRAND NEW NOT FITTED COILS - FOILS ONLY.If you are not still not sure about fitting these, in the first instance have a look on youtube, you will be able to find videos on there showing what to do.If you still have issues, then send an email through ebay messaging to us, we will attempt to get back to you within 24hrs (we are NOT sat on the computer 24/7)FREE UK SHIPPING ON THIS ITEM.All items are sent by signed for & recorded delivery.

RM Series Replcement Remote Control For Vestel 23801838 This is a fully compatible replacement remote control and performs all fixed functions of the original remote.No programming or setup required. Works straight out the boxImage is to show the design of the remote and actual layout depends on the make and model of the remote.This remote control is premium designed by SparesXpert.

RM Series Replcement Remote Control For Vestel 23801852 This is a fully compatible replacement remote control and performs all fixed functions of the original remote.No programming or setup required. Works straight out the boxImage is to show the design of the remote and actual layout depends on the make and model of the remote.This remote control is premium designed by SparesXpert.

RM Series Replcement Remote Control For Vestel 23801855 This is a fully compatible replacement remote control and performs all fixed functions of the original remote.No programming or setup required. Works straight out the boxImage is to show the design of the remote and actual layout depends on the make and model of the remote.This remote control is premium designed by SparesXpert.

RM Series Replcement Remote Control For Vestel 23801828 This is a fully compatible replacement remote control and performs all fixed functions of the original remote.No programming or setup required. Works straight out the boxImage is to show the design of the remote and actual layout depends on the make and model of the remote.This remote control is premium designed by SparesXpert.

RM Series Replcement Remote Control For Vestel 23801839 This is a fully compatible replacement remote control and performs all fixed functions of the original remote.No programming or setup required. Works straight out the boxImage is to show the design of the remote and actual layout depends on the make and model of the remote.This remote control is premium designed by SparesXpert.

RM Series Replcement Remote Control For Vestel 23801823 This is a fully compatible replacement remote control and performs all fixed functions of the original remote.No programming or setup required. Works straight out the boxImage is to show the design of the remote and actual layout depends on the make and model of the remote.This remote control is premium designed by SparesXpert.

RM Series Replcement Remote Control For Vestel 23801830 This is a fully compatible replacement remote control and performs all fixed functions of the original remote.No programming or setup required. Works straight out the boxImage is to show the design of the remote and actual layout depends on the make and model of the remote.This remote control is premium designed by SparesXpert.