Brand new never removed from protect container. Shipping will be signature confirmation. Listing also on Criaglist and Marketplace so could be sold locally. If that’s the case I will cancel this listing if sold.

Rega rp8 turntable with Dynavector 20X2 MM cartridge. The deck is in great condition some marks to lid the psu has some white marks please check pictures. Its in fully working order and sounds absolutely fantastic has a Dynavector 20X2 MM cartridge fitted. Comes with a ttpsu, funk matt and fabric one and original box. Collection more then welcome penge or south norwood london. Shipping with ups 48 hour fully insured International shipping welcome but please only through ebay International shipping Please check my other hifi items

You are buying a beautiful: Dynavector 20X2 High Output Moving Coil MC Phono Cartridge Comes with original Rega Headshell The condition is used but it works as new Pictures are part of the description so please see them carefully and make your own conclusion about the item’s WHAT YOU SEE IS WHAT YOU GET Thanks for looking selling as the pictures shown. ABOUT SHIPPING Shipping Within US 48 Continental States Only (No shipping to Puerto Rico, Alaska, Hawaii) will be shipped by Fedex UPS Or USPS Ground according your location with free tracking number and It will be shipped thru the address provided by eBay so please make sure it's right during checkout! Feel free to any questions. NOT SHIPPING TO P.O BOX ADDRESSES For International buyer we will use eBay Global shipping option no exceptions. ABOUT RETURN Please contact seller if you have any inconvenience with your item, before open an eBay case or leave a negative feedback (There are many ways to solve any issue) Is very important for Us make our costumers happy’s. Buy with confidence. ?????TOP SELLER ????? • See other items in our eBay page!!! https://www.ebay.com/str/jarvingracestore More information about the product: Since its debut, the DV-20X has been supported by a wide range of audiophiles, and this time it has been upgraded to the new 20X2. The 20X2 retains the same solid aluminum machined body and hard aluminum cantilever with a microridge stylus tip attached, but adopts the same high-rigidity magnetic circuit structure as the XX2MKII for the support part of the magnetic circuit. As a result, the intimacy between the neodymium magnet, the flux damper and the softening magnet is enhanced, and the total performance is even more stable and powerful. ? High output type The high-output MC cartridge was first made possible by the unique winding technology developed by Dynavector. By winding a power-generating coil with ultra-fine wire many times, an output voltage that does not require a head amplifier or step-up transformer is ensured. doing. In addition, the newly adopted powerful neodymium magnet increases the output voltage to 2.8 mV (15% higher than our previous model).The high-output MC does not require a head amplifier or step-up transformer, so it is not affected by the sound of these devices. There are some advantages over low output types. To use, connect to the MM position PHONO input terminal of the amplifier. ? Highly rigid solid aluminum body We have also carefully considered the cartridge shell, which has a great effect on the playback sound, and adopted a heavy-duty machined solid aluminum body. ? Hard aluminum cantilever Equipped with a microridge stylus tip on a 6 mm long hard aluminum cantilever, it features high resolution and solid mid-low range reproduction. ? Newly adopted neodymium magnets The 20X uses an even stronger neodymium magnet instead of the traditional samarium cobalt magnet. However, increasing the magnetic flux density in the air gap alone increases the output voltage, but increases the magnetic resistance, which is a characteristic of rare earth magnets, resulting in an increase in magnetostriction. Therefore, in order to solve these problems, the Dynavector cartridge inherits the conventional flux damper and softening magnet and further pursues the ideal magnetic circuit in the MC cartridge. Format: High output MC cartridge (with flux damper and softening magnet) Output voltage: 2.8mV (at 1KHz, 5cm/sec.) Channel separation: 25 dB or more (at 1KHz) Channel balance: 1.0 dB or less (at 1KHz) Frequency characteristics: 20 - 20,000Hz (±2dB) Compliance: 12 x 10-6 cm/dyn Needle force: 1.8 - 2.2g DC resistance: 150 ? Recommended load resistance: 1K ? or more Cantilever: 6mm long hard aluminum pipe Stylus: Microridge (special line contact needle) Weight: 9.2g

This is a Dynavector 20x2 low output MC cartridge less than a year old. The cartridge itself has less than 50 hours. I recently sent the cartridge to the amazing Joseph Long (Groovetickler) for an upgrade to a boron cantilever and Fritz Gyger FG2 nude Diamond ($500 service). This was a remarkable improvement over the original setup, with improvements in lower end weight and deeper soundstage, among others. I’ve put well less than 10 hours on the retip. While this cart was away for the retip I overspent on new cartridges, so it’s time to sell off a couple pieces. I genuinely hate to let it go, but I need the money. Here’s Joseph’s post after he finished work on the cart: https://www.instagram.com/p/CxBUnYauXZZ/?igshid=MzRlODBiNWFlZA==

For sale my Dynavector DV-20X2L moving coil cartridge. I have just had this cartridge fully refurbished and upgraded by the Expert Stylus And Cartridge Company, with a brand new boron cantilever and ultra-low mass paratrace diamond stylus, their top rebuild option. The cartridge is unused since return from Expert, and Ive only opened the box to take the photos for this listing. (For completeness please note the Dynavector box included in the sale is correct for this model cartridge but isnt the original box which came with the cartridge because it shows a different serial number). The upgrades carried out by Expert should put performance close to the next model up in the Dynavector range, the DVXX2 MkII. Id keep this very special cartridge to use myself except Ive acquired quite a number of moving coils now, including a few exotic models and I cant listen to them all at once! I hope the listing is self-explanatory but please contact me with any questions. I am sure someone is going to really enjoy this one - buy with confidence!

Dynavector DV20X2L moving coil cartridge. Approximately 300 hours use. Sounds lovely. I am selling it because I have moved up to the Dynavector XX2 mk2.Includes original box with headshell screws, allen key and stylus guard.Will be sent via Royal Mail Parcel Force 48 hour delivery.Returns not accepted.Please check out my other listing for Dynavector P75 mk4 phono stage which I used with this cartridge.

Dynavector DV-20X2L Moving Coil Cartridge. Approx 500 hours use. VGC+ with original box.

Dynavector DV-20X2/H MC Cartridge in excellent condition. This is the high-output version making it compatible with MM phono stages. I bought this new in 2019 from Cymbiosis, its spent half its life in a box and the other half on my second deck which only gets occasional use, so has plenty of life left. TypeHigh output moving coil cartridge with flux damper and softened magnetismOutput Voltage2.8mV (at 1KHz, 5cm/sec.)Channel Separation25 dB (at 1KHz)Channel balance1.0 dB (at 1KHz)Frequency response20 - 20,000Hz (± 1dB)Compliance12 mm/NTracking force1.8 - 2.2 gImpedance150 ohms Recommended load impedance> 1,000 ohmsCantilever6mm length, hard aluminium pipeStylus tipMicro Ridge Nude diamondWeight9.2 g

Dynavector Moving Coil Cartridge DV-20X2 H - Unused with box & hardware.

Hello, this fine cartridge was re-tipped by Soundsmith in 2021 and used for about 6 months. Its been sitting in a drawer since then. I like to try a different cartridge every year. Soundsmith replaced the aluminum cantilever with a boron version as used in Dynavectors more expensive models.This is the High Output model, usable with a standard MM preamp. Bidding starts at $450. Conus only, thanks.