1 tube 12AX7S 1960 ECC83 Thomson CSF France FSE 7248 FF tested good working röhre telefunken rtc mullard

1 Tube 12ax7s RTC used & working ecc83 rohre tubeamp

1 tube 12AX7S 1960 ECC83 Thomson CSF France FSE 7248 FF tested good working röhre telefunken rtc mullard

RARE 12AX7s RTC 4x TUBES NIB CV4004 E83CC ECC83 MULLARD SAME LOT METRIX MATCHED. Le 05-avr.-24 à 14:21:48 Paris, le vendeur a ajouté les informations suivantes : RARE 12AX7s RTC 4x TUBES NIB CV4004 ECC83 MULLARD SAME LOT METRIX MATCHED.

1 Tube 12ax7s RTC used & working ecc83 rohre tubeamp

-Metrix U61b Tested : 1,2mA / 1,3mA (new is 1,2mA) ***OFFER ACCEPTED***

-RARE TUBES NOS NIB FROM SAME LOT PERFECTLY MATCHED & BALANCED -Metrix U61b Tested (nominal is 1,2mA +/-20%) : Tube 1 : 1,2mA / 1,2mATube 2 : 1,2mA / 1,2mATube 3 : 1,2mA / 1,4mATube 4 : 1,4mA / 1,2mA -Come in original boxe Familly of : 5751 12AX7 12AX7s 12AX7WA 12AX7WA 12AX7A ***OFFER ACCEPTED***

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) FRS63052 RT 2 LARGE ARMS CLOSE RING GETTER COPPER ANODES 0,7mA/0,8mA (2,4mA/2,5mA) 42/44 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) FRS63023 RT 2 LARGE ARMS CLOSE RING GETTER COPPER ANODES 1,1mA/1,0mA (2,7mA/2,6mA) 45/44 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) 8332 RTC RING GETTER BOX RIBBED PLATES 1,4mA/1,5mA (3,4/3,5) 46/51 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) FRS7506 5 RTC LARGE ARMS RING GETTER COPPER ANODES 1,5mA/1,4mA (3,4/3,4) 50/48 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) FEM 7238 FF CIFTE 2 ARMS RING GETTER TRIPLE MICA SILVER SQUARE HOLE PLATES VERTICAL STAPPLES 1,0mA/1,0mA (2,8mA/2,7mA) 47/41 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) FRS7506 5 RTC LARGE ARMS RING GETTER COPPER ANODES 1,5mA/1,4mA (3,4/3,4) 50/48 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) 8332 RTC RING GETTER BOX RIBBED PLATES 1,4mA/1,5mA (3,4/3,5) 46/51 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) FRS63052 RT 2 LARGE ARMS CLOSE RING GETTER COPPER ANODES 0,7mA/0,8mA (2,4mA/2,5mA) 42/44 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) FEM 7238 FF CIFTE 2 ARMS RING GETTER TRIPLE MICA SILVER SQUARE HOLE PLATES VERTICAL STAPPLES 1,0mA/1,0mA (2,8mA/2,7mA) 47/41 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) FRS63023 RT 2 LARGE ARMS CLOSE RING GETTER COPPER ANODES 1,1mA/1,0mA (2,7mA/2,6mA) 45/44 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

Wir haben deinradio! Senden Sie uns eine Nachricht Unser Shop Verkäuferprofil Bewertungen Shop speichern Kontakt Mazda 12AX7S Röhre rare tube wie E83CC ECC803S Röhrenverstärker neu Bitte entnehmen Sie den genauen Zustand und Lieferumfang den Bildern.Die Röhre ist noch neu und in der OVP Wir bieten eine Vielzahl an alten Bastel -und Sammelobjekten an.Bitte beachten Sie, dass aufgrund des Alters keine Garantien auf die technischen Funktionen gegeben werden können.The parts are very old, we dont give any guarantee on the technical function. Zahlung Versand Kombiversand nur bei Artikeln möglich, die am gleichen Tag gekauft werden. (aus einer Auktionsrunde) DIe angepasste Rechnung erhalten Sie dann nach Auktionsende. Aufwendiger Versand (klimaneutral) mit DHL Premium in 2-welliger Kartonage und aufwendiger Polsterung! Versand größtenteils plastikfrei, 80 Prozent des Versandmaterial aus recyceltem Altpapier bzw. Second-Hand Kartonagen. WORLDWIDE SHIPPING ON REQUEST! PLEASE ASK BEFORE YOU BUY! Links Unser Shop Verkäuferprofil Bewertungen Shop speichern Kontakt Newsletter Verpassen Sie keine Angebote mehr! Wir informieren Sie über Angebote und Aktionen bequem per E-Mail. Newsletter abonnieren Kontakt Senden Sie uns eine Nachricht

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) FRS7506 5 RTC LARGE ARMS RING GETTER COPPER ANODES 1,5mA/1,4mA (3,4/3,4) 50/48 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) FEM 7238 FF CIFTE 2 ARMS RING GETTER TRIPLE MICA SILVER SQUARE HOLE PLATES VERTICAL STAPPLES 1,0mA/1,0mA (2,8mA/2,7mA) 47/41 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) FRS63052 RT 2 LARGE ARMS CLOSE RING GETTER COPPER ANODES 0,7mA/0,8mA (2,4mA/2,5mA) 42/44 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) FRS63023 RT 2 LARGE ARMS CLOSE RING GETTER COPPER ANODES 1,1mA/1,0mA (2,7mA/2,6mA) 45/44 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

TESTS CONDITIONS (datasheet) DUOVAC RADIOELEC Va = 250V Vg=-2V Ia=1,2mA (Va=250V Vg=-1V Ia=3,2mA) HICKOK TV7D/U EV7-6080 B12 B min=32 (65%) EV2-1030 B12 B min=32 (65%) Please note that HICKOK is not a laboratory tester, though it is very well calibrated...HERE is how I calibrated mine following manual services specifications. I calibrated it to respect the low of the scale for filament... High voltage on filament would damage it...but gives higher values...0.6 (065-0.72) -->0.65V ; 1.1 (1.06-1.16) -->1.14V ; 1.5 (1.26-1.42) -->1.30V ; 2.0 (1.90-2.10) -->1.95V ; 2.5 (2.56-2.88) -->2.77V ; 3.0 (3.25-3.60) -->3.25V ; 4.3 (4.30-4.75) -->4.55V ; 5.0 (5.15-5.68) -->5.49V ; 6.3 (6.20-6.80) -->6.47V ; 7.5 (7.32-8.10) -->7.45V ; 10 (9.60-10.80) -->10.03V ; 12.6 (12.1-13.3) -->12.25V ; 20 (19.0-21.0) -->20.50V ; 25 (25.3-28.0) -->27.65V ; 35 (35.2-39.0) -->38.09V ; 50 (51.5-57.0) -->52.80V ; 75 (74.0-82.0) -->74.82V ; 117 (115-127) -->116.5VIf needed, i can share all other tests calibrations I get (129.5V/130V +o-3V ; 41.35V/40V +o-2V ; 4.21V/4V +o-1V ; 56.5V /56V....) 8332 RTC RING GETTER BOX RIBBED PLATES 1,4mA/1,5mA (3,4/3,5) 46/51 ! NEW OLD STOCK ! CHECK ALL THE LIST TO BUY OTHER REFERENCES AND COMBINE SHIPPING PLEASE CONTACT ME BEFORE BUYING TO CHECK THE BEST OPTION FOR THE SHIPPING COSTSTUBES ARE QUITE FRAGILE, SO YOU SHOULD PAY A BIT MORE FOR A SAFE PACKAGE THAN A BUBBLE LETTER. I DECLINE ANY RESPONSABILITIES IF YOU CHOOSE LETTER AND YOUR ITEMS ARE DAMAGED DURING TRANSPORT...

1 TUBE ANCIEN ECC 83 / 12AX7S , tsf, Ampoule testé