Tascam 122 MKIII 3 Head Professional Cassette DeckThis product data sheet is originally written in English. Description ?Condition? USED?Description?There are no noticeable scratches on the exterior, but please understand that there are minor scratches from use.The movement has been tested to make sure it works perfectly.Please check the listing photos for more details.I played the test tape (TEAC MTT -255 C-Normal tape) and measured it with the OUTPUT jack. By the way, the frequency characteristics were the same level for both the left and right channels with respect to 315 Hz.We have been doing good maintenance and have made the following repairs and adjustments.?Because this model is a direct drive, no belt is used.?The gear C of the drive mechanism has been replaced with a genuine compatible.?Replace pulley rubber with TEAC genuine product?The pinch roller rubber was polished and cleaned.?Mechanic maintenance (Cleaning, lubricating and adjusting)?Demagnetization of tape travel paths, such as heads?Insulation resistance above the limit of measurement (199 megohms) was confirmed at 100 V mega.?Adjustments The following items have been adjusted in accordance with maintenance regulations.- Speed adjustment (The variable range is more than +/- 12% of the specification. Use ABEX ACT -111)- Azimuth adjustment (using TEAC MTT -257)- Input level adjustment (using ABEX MTT -150)- Replay equalizer adjustment (using TEAC MTT -255 C)- Output level adjustment (includes XLR jacks)- VU meter display level adjustment- Bias Adjustment- Calibration of user bias adjustment mechanism?recording characteristics When I switched between Source and Tape while recording after adjusting the bias, I didnt notice any sound changes. Measuring instruments show that when sound sources of 400 Hz and 10 KHz are recorded and played back, the level difference isIt was about +/- 0 dB for Normal, +/- 0.3 dB for CrO2 and +/- 1 dB for Metal. All items shipped from our company are issued a tracking number. We will notify you through eBay after the shipment is completed. Terms of Sale International Buyers - Please Note: These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. ?Condition? USED?Description?There are no noticeable scratches on the exterior, but please understand that there are minor scratches from use.The movement has been tested to make sure it works perfectly.Please check the listing photos for more details.I played the test tape (TEAC MTT -255 C-Normal tape) and measured it with the OUTPUT jack. By the way, the frequency characteristics were the same level for both the left and right channels with respect to 315 Hz.We have been doing good maintenance and have made the following repairs and adjustments.?Because this model is a direct drive, no belt is used.?The gear C of the drive mechanism has been replaced with a genuine compatible.?Replace pulley rubber with TEAC genuine product?The pinch roller rubber was polished and cleaned.?Mechanic mThere are no noticeable scratches on the exterior, but please understand that there are minor scratches from use.The movement has been tested to make sure it works perfectly.Please check the listing photos for more details.I played the test tape (TEAC MTT -255 C-Normal tape) and measured it with the OUTPUT jack. By the way, the frequency characteristics were the same level for both the left and right channels with respect to 315 Hz.We have been doing good maintenance and have made the following repairs and adjustments.?Because this model is a direct drive, no belt is used.?The gear C of the drive mechanism has been replaced with a genuine compatible.?Replace pulley rubber with TEAC genuine product?The pinch roller rubber was polished and cleaned.?Mechanic maintenance (Cleaning, lubricating Bundle Description NA MPN NA Brand TASCAM Country/Region of Manufacture Japan California Prop 65 Warning NA Model 122MK3

Tascam 122 MKIII 3 Head Professional Cassette DeckThis product data sheet is originally written in English. Description ?Condition? USED?Description?There are no noticeable scratches on the exterior, but please understand that there are minor scratches from use.The movement has been tested to make sure it works perfectly.Please check the listing photos for more details.I played the test tape (TEAC MTT -255 C-Normal tape) and measured it with the OUTPUT jack. By the way, the frequency characteristics were the same level for both the left and right channels with respect to 315 Hz.We have been doing good maintenance and have made the following repairs and adjustments.?Because this model is a direct drive, no belt is used.?The gear C of the drive mechanism has been replaced with a genuine compatible.?Replace pulley rubber with TEAC genuine product?The pinch roller rubber was polished and cleaned.?Mechanic maintenance (Cleaning, lubricating and adjusting)?Demagnetization of tape travel paths, such as heads?Insulation resistance above the limit of measurement (199 megohms) was confirmed at 100 V mega.?Adjustments The following items have been adjusted in accordance with maintenance regulations.- Speed adjustment (The variable range is more than +/- 12% of the specification. Use ABEX ACT -111)- Azimuth adjustment (using TEAC MTT -257)- Input level adjustment (using ABEX MTT -150)- Replay equalizer adjustment (using TEAC MTT -255 C)- Output level adjustment (includes XLR jacks)- VU meter display level adjustment- Bias Adjustment- Calibration of user bias adjustment mechanism?recording characteristics When I switched between Source and Tape while recording after adjusting the bias, I didnt notice any sound changes. Measuring instruments show that when sound sources of 400 Hz and 10 KHz are recorded and played back, the level difference isIt was about +/- 0 dB for Normal, +/- 0.3 dB for CrO2 and +/- 1 dB for Metal. All items shipped from our company are issued a tracking number. We will notify you through eBay after the shipment is completed. Terms of Sale International Buyers - Please Note: These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. ?Condition? USED?Description?There are no noticeable scratches on the exterior, but please understand that there are minor scratches from use.The movement has been tested to make sure it works perfectly.Please check the listing photos for more details.I played the test tape (TEAC MTT -255 C-Normal tape) and measured it with the OUTPUT jack. By the way, the frequency characteristics were the same level for both the left and right channels with respect to 315 Hz.We have been doing good maintenance and have made the following repairs and adjustments.?Because this model is a direct drive, no belt is used.?The gear C of the drive mechanism has been replaced with a genuine compatible.?Replace pulley rubber with TEAC genuine product?The pinch roller rubber was polished and cleaned.?Mechanic mThere are no noticeable scratches on the exterior, but please understand that there are minor scratches from use.The movement has been tested to make sure it works perfectly.Please check the listing photos for more details.I played the test tape (TEAC MTT -255 C-Normal tape) and measured it with the OUTPUT jack. By the way, the frequency characteristics were the same level for both the left and right channels with respect to 315 Hz.We have been doing good maintenance and have made the following repairs and adjustments.?Because this model is a direct drive, no belt is used.?The gear C of the drive mechanism has been replaced with a genuine compatible.?Replace pulley rubber with TEAC genuine product?The pinch roller rubber was polished and cleaned.?Mechanic maintenance (Cleaning, lubricatingThere are no noticeable scratches on the exterior, but please understand that there are minor scratches from use.The movement has been tested to make sure it works perfectly.Please check the listing photos for more details.I played the test tape (TEAC MTT -255 C-Normal tape) and measured it with the OUTPUT jack. By the way, the frequency characteristics were the same level for both the left and right channels with respect to 315 Hz.We have been doing good maintenance and have made the following repairs and adjustments.?Because this model is a direct drive, no belt is used.?The gear C of the drive mechanism has been replaced with a genuine compatible.?Replace pulley rubber with TEAC genuine product?The pinch roller rubber was polished and cleaned.?Mechanic maintenance (Cleaning, lubricating Bundle Description NA MPN NA Brand TASCAM Country/Region of Manufacture Japan California Prop 65 Warning NA Model 122MK3