Excellent condition. New cover. Works great! Includes a Shure sme-3009 tone arm with a Shure V15 type 3 cartridge and stylus. Also includes original paperwork.

Desired Color! Revised Thorens TD 125 MKII Turntable Sme 3009 Series IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.You can choose the color of the housing, top plate and tonearm base yourself.You can choose the color of the housing, the cover plate and the tonearm base yourself.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored Thorens TD125 MKII with SME 3009 Series III Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Item description:Limit switch:      NoInner plate: metalSpindle:                    10mmBasic dimensions:             Width: 525mm, depth: 413mm, height 97mmThe following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance testHousing:Painted in your desired color!The housing consists of 40mm side panels and a 16mm thick MDF base. It is painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed.Cover plate:The cover plate is painted in your desired color!Tonearm base:The tonearm base is painted in your desired color!Device feet:There are four height-adjustable ones on the bottom of the case SPIKES Installed from chrome-plated stainless steel.Ortofon VM Alpha cartridge (included):With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine. The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood to be placed on the housing: 160Device feet:Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by 3 rubber buffers.Resonances and feedback are thus effectively prevented.XL (see pictures 11 and 12): 84XXL (see pictures 9 and 10): 130Cartridge MM system including installation: Ortofon VinylMaster Red (naked elliptical cut):             220Ortofon VinylMaster Silver (nude Fritz Gyger 70 cut):        470 Ortofon 2MRed (elliptical):             99Ortofon 2M Blue (diamond cut):   220Ortofon 2M Bronze (fineline diamond cut): 390 Ortofon 2M Black (Shibata diamond cut):         599 Ortofon 2M Black LVB 250 (Shibata diamond cut):              945audio-technica VM740ML Dual MM (Microlinear Needle):        339audio-technica VM750SH Dual MM (Shibata needle):                439 audio-technica VM760SLC Dual MM (Special Line Contact):  699Cartridge MC System including installation: audio-technica AT-OC9XML Dual MC (Microlinear Needle):    599 audio-technica AT-OC9XSH Dual MC (Shibata needle grind):  699 audio-technica AT-OC9XSLDual MC (Special Line Contact): 799The housing consists of 40mm side panels and a 16mm thick MDF base. It is painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxy Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modifizierter Artikel Ja Modell TD 125 MKII Herstellernummer nicht zutreffend Ausländisches Produkt Ja Herstellungsland und -region Deutschland

Excellent condition. New cover. Works great! Includes a Shure sme-3009 tone arm with a Shure V15 type 3 cartridge and stylus. Also includes original paperwork.

Revised Thorens TD 125 MKII Turntable Black Orange Sme 3009 Series IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored Thorens TD125 MKII with SME 3009 Series III Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Item description:Limit switch:      NoInner plate: metalSpindle:                    10mmBasic dimensions:             Width: 525mm, depth: 413mm, height 97mmThe following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance testHousing:The housing consists of 40mm side panels and a 16mm thick MDF base. The surface was painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed.Device feet:There are four height-adjustable ones on the bottom of the case SPIKES Installed from chrome-plated stainless steel. The base is screwed to the frame and can be easily removed.Ortofon VM Alpha cartridge (included):With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine. The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood: The hood is a new product (replica) with a wall thickness of 4mm, extremely stable, Plexiglas XT, absolutely colorless and clear, break-proof to impact-resistant, weatherproof and... Age-resistant, high-quality surface and flatness: 160XXL device feet (Figure 9-12):Solid stainless steel, height adjustable, total weight 2.5kg, diameter 65mm: 129Cartridge MM system including installation:Ortofon VM Red (naked elliptical cut): 199Ortofon VM Silver (Nude Fritz Gyger 70 cut): 435Ortofon 2M Red (elliptical): 99Ortofon 2M Blue (elliptical, naked): 199Ortofon 2M Bronze (Fineline): 360Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata, boron needle carrier): 899Cartridge MC System including installation: Audio-technica AT-OC9XML (Microlinear): 599Audio-technica AT-OC9XSH (Shibata): 699Audio-technica AT-OC9XSL (Special Line Contact): 799The housing consists of 40mm side panels and a 16mm thick MDF base. The surface was painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor m Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe Schwarz Modell TD 125 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Excellent condition. New cover. Works great! Includes a Shure sme-3009 tone arm with a Shure V15 type 3 cartridge and stylus. Also includes original paperwork.

Desired Color! Revised Thorens TD 125 MKII Turntable With Sme 3009The description of this item has been automatically translated. If you have any questions, please feel free to contact us.You can choose the color of the housing, top plate and tonearm base yourself.You can choose the color of the housing, the cover plate and the tonearm base yourself.Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored Thorens TD125 MKII in desired color with SME 3009 ATTENTION: The brass tonearm cutting bearing was replaced by the original plastic one!Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Item description:Limit switch:      NoInner plate: metalSpindle:                    10mmBasic dimensions:             Width: 525mm, depth: 413mm, height 97mmThe following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance testHousing:Painted in your desired color!The housing consists of 40mm side panels and a 16mm thick MDF base. It is painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed.Cover plate:The cover plate is painted in your desired color!Device feet:There are four height-adjustable ones on the bottom of the case SPIKES Installed from chrome-plated stainless steel.Ortofon VM Alpha cartridge (included):With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine. The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions). Plate weight:With a weight of 320g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood: The hood is a new product (replica) with a wall thickness of 4mm, extremely stable, Plexiglas XT, absolutely colorless and clear, break-proof to impact-resistant, weatherproof and... Age-resistant, high-quality surface and flatness: 160XXL device feet:Solid stainless steel, height adjustable, total weight 2.5kg, diameter 65mm: 129Cartridge MM system including installation:Ortofon VM Red (naked elliptical cut): 199Ortofon VM Silver (Nude Fritz Gyger 70 cut): 435Ortofon 2M Red (elliptical): 99Ortofon 2M Blue (elliptical, naked): 199Ortofon 2M Bronze (Fineline): 360Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata, boron needle carrier): 899The housing consists of 40mm side panels and a 16mm thick MDF base. It is painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness. With a weight of 32 Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modifizierter Artikel Ja Modell TD 125 MKII Herstellernummer nicht zutreffend Ausländisches Produkt Ja Herstellungsland und -region Deutschland

tonearm board for thorens td 125 mk II and sme 3009, black. Comes with 4 screws (one a little bent). The board was taken from a td 125 mkII turntable with an sme 3009 arm. It is in fine working condition with signs of use, minor scratches and scuffs. Easily refinished. as is condition. Ships from Pa.

Revised Thorens Td 125 Mkii Turntable With Sme 3009 IN Birnenholz OiledThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available for 220V-240V (50/60Hz) or 100V-130V (50/60Hz) - for example USA and worldwideIndividual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!Revised by ART-AND-SOUND Reconditioned 125 MKII with SME 3009 in a solid oiled pear wood frame20kg turntablePlease note that wood is a natural product. The grain and color will always differ from the item photos.Our record players are lovingly put together, restored and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.Item description:Pickup:         Ortofon VinylMaster Alpha (not as shown)Device feet: Stainless steel, height adjustable, 65mm x 25mm, total weight 2.5kgLift control:          Frontally on the control bar and on the tonearmLimit switch:      NoInner plate: metalSpindle:                    10mmBasic dimensions:             Width: 525mm, depth: 413mm, height 97mmThe following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance testHousing:The housing consists of 40mm solid pear wood side panels and a 16mm thick MDF base. The surface was oiled and polished several times. The connection panel for all required cables is located on the back. Four height-adjustable stainless steel device feet are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed.Basic dimensions of the frame (without feet): 525mm x 413mm x 97mmWeight (without feet): approx. 6.3kgOrtofon VM Alpha cartridge (included):With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine. The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine. Drive belt:The drive belt is manufactured according to the original Thorens specifications (same material and dimensions).Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. --The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood to be placed on the housing: 160Cartridge MM system including installation:Ortofon VM Red (elliptical, naked): 199Ortofon VM Silver (Fritz Gyger 70 cut): 399Ortofon 2M Red (elliptical): 109Ortofon 2M Blue (elliptical, naked):229Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 AUDIO-TECHNICA VM 740ML (Microlinear): 339AUDIO-TECHNICA VM 750 SH (Shibata): 439AUDIO TECHNICA VM 760 SLC (special line contact grind): 699 Cartridge MC System including installation: AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modifizierter Artikel Ja Modell TD 125 MKII Herstellernummer nicht zutreffend Ausländisches Produkt Ja Herstellungsland und -region Deutschland

Revised Thorens TD 125 MKII Turntable With Sme 3009 Birnenholz OiledThe description of this item has been automatically translated. If you have any questions, please feel free to contact us. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 125 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

RESTORED and MODIFIED by ART-AND-SOUND Restored 125 MKII with SME 3009 tonearmDesigner piece - design product - designer productOur turntables are lovingly put together, modified and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.The customer receives a top-class device.The phonograph works with 220V/50Hz.For shipping to the USA the turntable is converted to 110V/60Hz.Item description:Limit switch:     NoInner plate: metalBearing mandrel: 10mm Basic dimensions:            Width: 52cm, depth: 41cm, height approx. 20cmAudio and Power cables are firmly connected to the turntable. The housing:The housing consists of 40mm MDF side panels and a 16mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back.Faceplate:Cover plate made of 1mm gold anodized aluminumThe Ortofon OM10 cartridge:With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 10 is the entry into the series and is a great entry-level system for mid-range turntables.The OM series from Ortofon is compatible with each other. So you can start with an OM 10 and then improve the quality with the appropriate needle insert by using the next needle insert.The audio cable:Original SME cableThe turntable:The turntable is made in five complex and time-consuming steps polished to a high shine.The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine.Spikes made of chrome-plated stainless steel:So that the record player is decoupled from low-frequency vibrations, The chassis is equipped with height-adjustable spikes. Resonances and feedback are thus effectively prevented. The drive belt:The drive belt is new. It is manufactured according to the original Thorens specifications (same material and same dimensions). New stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system. The following Parts are as Accessoriesör erhäliltic and not component this auction:Hood (to be placed on the frame): eBay-item number 112401191474The following parts are available as accessories and not included in this auction:Hood (to put on the housing):    German eBay-article number is 112401191474Cartridge MM systems including installation: Cartidge MC systems including installation:The housing consists of 40mm MDF side panels and a 16mm thick base made of the same material. It is very elaborate with several layers of metallic paint sealed and polished with appropriate intermediate sanding. The connection panel for all required cable connections is located on the back. With the OM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The OM 10 is the entry into the series and is a great entry-level system for mid-range turntables. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strai

Individual production! Please note the processing time stated on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored Thorens TD125 MKII with SME 3009 Series III Our turntables are lovingly put together, modified and assembled by hand. Each of them is unique and differs in model, color and veneer grain. The high-quality housings are restored or newly manufactured using qualified craftsmanship. Electrical components are checked, Moving parts oiled and wearing parts replaced. A final endurance test rounds off the complex work. The customer receives a top-class device.Item description:Limit switch:      NoInner plate: metalSpindle:                    10mmBasic dimensions:             Width: 525mm, depth: 413mm, height 97mmThe following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of an endurance testHousing:The housing consists of 40mm side panels and a 16mm thick MDF base. The surface was painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed.Device feet:There are four height-adjustable ones on the bottom of the case SPIKES Installed from chrome-plated stainless steel. The base is screwed to the frame and can be easily removed.Ortofon VM Alpha cartridge (included):With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine. The high-gloss polish gives your record player a unique look.With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine. Drive belt:This drive belt is manufactured according to the original Thorens specifications (same material and dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood: The hood is a new product (replica) with a wall thickness of 4mm, extremely stable, Plexiglas XT, absolutely colorless and clear, break-proof to impact-resistant, weatherproof and... Age-resistant, high-quality surface and flatness: 160XXL device feet (Figure 9-12):Solid stainless steel, height adjustable, total weight 2.5kg, diameter 65mm: 129Cartridge MM system including installation:Ortofon VM Red (naked elliptical cut): 199Ortofon VM Silver (Nude Fritz Gyger 70 cut): 435Ortofon 2M Red (elliptical): 99Ortofon 2M Blue (elliptical, naked): 199Ortofon 2M Bronze (Fineline): 360Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata, boron needle carrier): 899Cartridge MC System including installation: Audio-technica AT-OC9XML (Microlinear): 599Audio-technica AT-OC9XSH (Shibata): 699Audio-technica AT-OC9XSL (Special Line Contact): 799The housing consists of 40mm side panels and a 16mm thick MDF base. The surface was painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed. With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor m

This turntable is available for 220V-240V (50/60Hz) or 100V-130V (50/60Hz) - for example USA and worldwideIndividual production! Please note the processing time stated on Ebay!Individual production! Please note the processing time specified on Ebay!Revised by ART-AND-SOUND Restored 125 MKII in flight green and stainless steelAlso possible with different SME 3009 tonearms20kg turntableOur record players are lovingly put together, restored and assembled by hand.Each of them is unique and differs in model, color, veneer grain or other details.The high-quality housings are restored or newly manufactured using qualified craftsmanship.Electrical components are checked, Moving parts oiled and wearing parts replaced.A final endurance test rounds off the complex work.Item description:Limit switch:      NoInner plate: metalSpindle: 10mmBasic dimensions:            Width: 525mm, depth: 413mm, height 97mThe following work will be carried out:Revision of electronic and mechanical componentsUm- or Components required for installationSetting and balancing the different speedsAdjustment and adjustment of the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire record playerExecution of endurance testHousing:The housing consists of 40mm MDF side panels and a 16mm thick base, also made of MDF. The surface was painted several times and then polished. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the bottom of the housing. The base is screwed to the frame and can be easily removed.Basic dimensions of the frame (without feet): 525mm x 413mm x 97mmWeight (without feet): 6.3 kgOrtofon VM Alpha cartridge (included):With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot.Audio cable:Branded cable. Ready-made analog audio cinch cable for cabling turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-life signal transmission. Contact security and corrosion protection are guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spaciousness.Stainless steel record weight:With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By using it, you increase the sound performance of your system.Turntable:The turntable is made in five complex and time-consuming steps polished to a high shine. The high-gloss polish gives your record player a unique look. With surface sealing using a special protective coating to prevent repeated tarnishing and for a long-lasting shine. Drive belt:The drive belt is manufactured according to the original Thorens specifications (same material and dimensions).The following Parts are as Accessoriesör erhäliltic and not component this auction:The following parts are available as accessories and not included in this auction:Hood:for placing on the housing: 160 Device feet XXL: 90Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by 3 rubber buffers.Resonances and feedback are thus effectively prevented. Total weight 2520g, diameter 65mm, height 26mmSME tonearms (the matching systems are selected according to the tonearms): SME Series III (replaceable tonearm tube, eff. Mass approx. 5g): 590 SME 3009 improved (fixed headshell, eff. Mass 6.5g): 690 SME 3009 S2 improved (replaceable headshell, eff. Mass 9.5g): 690 SME 3009 Series II (replaceable headshell, eff. Mass 12.5g): 790 Cartridge MM system including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (special line): 699Ortofon 2M Red (elliptical): 109Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330 ORTOFON Quintet Blue (elliptical, naked): 470 ORTOFON Quintet Bronze (Fineline): 660 ORTOFON Quinted Black (Shibata): 940 ORTOFON Cadenza Red (Fineline): 1299 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799With the VM series, Ortofon has long created the reference MM cartridge, the long production time and the characteristic needle body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By

Individuelle Anfertigung! Bitte beachten Sie, die bei Ebay angegebene Bearbeitungszeit! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Bei Selbstabholung 70,00 € Rabatt! Restaurierter Thorens TD125 MKII mit SME 3009 Series III Unsere Plattenspieler werden in liebevoller Handarbeit zusammengestellt, modifiziert und montiert. Jeder von ihnen ist ein Unikat und unterscheidet sich in Modell, Farbe, Furnier-maserung. Die hochwertigen Gehäuse werden in qualifizierter Handwerksarbeit restauriert oder neu angefertigt. Elektrische Bauteile werden überpüft, beweglichen Teile geölt und Verschleißteile ausgetauscht. Einen abschließender Dauerlauftest runden die aufwendigen Arbeiten ab. Der Kunde erhält ein Gerät der Spitzenklasse. Artikelbeschreibung: Endabschaltung: NeinInnenteller: MetallSpindel: 10 mmGrundmaße: Breite: 525mm, Tiefe: 413mm, Höhe 97mm Folgende Arbeiten werden durchgeführt:Revision elektronischer und mechanischer BauteileUm- bzw. Einbau benötigten KomponentenEinstellung und Abgleich der verschiedenen GeschwindigkeitenEinstellung und Justierung der FederungÜberprüfung und Justierung des Tonarmes und des Tonabnehmers Gründliche Reinigung des gesamten PlattenspielersAusführung eines Dauerlauftestes Gehäuse: Das Gehäuse besteht aus 40mm Seitenteilen und einem 16 mm starken Boden aus MDF. Die Oberfläche wurde mit mehreren Farbschichten lackiert und anschließend mit Klarlack versiegelt. An der Rückseite befindet sich das Anschlusspanel für alle benötigten Kabel. Am Gehäuseboden sind vier höhenverstellbare Spikes aus verchromten Edelstahl installiert. Der Boden ist mit dem Rahmen verschraubt und kann leicht entfernt werden. Gerätefüße: Am Gehäuseboden sind vier höhenverstellbare SPIKES aus verchromten Edelstahl installiert. Der Boden ist mit dem Rahmen verschraubt und kann leicht entfernt werden. Tonabnehmer Ortofon VM Alpha (inklusive): Mit der VM-Serie hat Ortofon seit langem die Referenz MM-Tonabnehmer geschaffen, die lange Produktionszeit und der charakteristische Nadelkorpus sind auf der ganzen Welt ein Begriff. Das VM Alpha ist der Einstieg in die Serie und ist ein Super Einstiegssystem für Plattenspieler der mittleren Preislage.Die VM Reihe von Ortofon ist untereinander kompatibel. Sie können also mit einem VM Alpha starten und dann mit dem passenden Nadeleinschub die Qualität verbessern, indem Sie den nächst höheren Nadeleischub verwenden. Audiokabel: Markenkabel. Fertig konfektioniertes analoges Audio-Cinchkabel für die Verkabelung von Plattenspielern! Durch den besonders hochwertigen Innenleiter aus sauerstofffreiem Kupfer (OFC) sorgt dieses Qualitätskabel für eine naturgetreue Signalübertragung. Kontaktsicherheit und Korrosionsschutz ist über die 24 Karat vergoldeten Steckerkontakte garantiert. Das Kabel hat ein neutrales Klangbild mit guter Dynamik und Räumlichkeit. Plattenteller: In fünf aufwendigen und zeitintensiven Arbeitsschritten, wird der Plattenteller auf Hochglanz poliert. Die Hochglanzpolitur verleit Ihrem Plattenspieler ein einzigartiges Aussehen.Mit Oberflächenversiegelung durch eine spezielle Schutzlackierung, gegen wiederholtes Anlaufen und für einen langanhaltenden Glanz. Antriebsriemen: Dieser Antriebsriemen wird nach den ursprünglichen Thorens Spezifikationen (gleiches Material und gleiche Abmessungen) gefertigt. Folgende Teile sind als Zubehör erhältlich und nicht Bestandteil dieser Auktion:The following parts are available as accessories and not included in this auction: Haube: Die Haube ist eine Neuanfertigung (Nachbau) mit einer Wandstärke von 4mm, äußerst stabil, Plexiglas XT, absolut farblos und klar, bruchfest bis schlagzäh, witterungs-u. alterungsbeständig, hochqualitative Oberfläche und Planität: 160 XXL Gerätefüße (Bild 9-12): Edelstahl massiv, höhenverstellbar, Gesamtgewicht 2,5kg, Durchmesser 65mm: 129 Cartridge MM System including installation: Ortofon VM Red (nackter elliptischer Schliff): 199 Ortofon VM Silver (Nude Fritz Gyger 70-Schliff): 435 Ortofon 2M Red (elliptisch): 99 Ortofon 2M Blue (elliptisch, nackt): 199 Ortofon 2M Bronze (Fineline): 360 Ortofon 2M Black (Shibata): 599 Ortofon 2M Black LVB 250 (Shibata, Bor-Nadelträger): 899Cartridge MC System including installation: Audio-technica AT-OC9XML (Microlinear): 599 Audio-technica AT-OC9XSH (Shibata): 699Audio-technica AT-OC9XSL (Special Line Contact): 799

Desired Color! Revised Thorens TD 125 MKII Turntable Sme 3009 Series IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.You can choose the color of the housing, the cover plate and the tonearm base yourself.You can choose the color of the housing, the cover plate and the tonearm base yourself.Individual production! Please note the processing time specified on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored Thorens TD125 MKII with SME 3009 Series III Our turntables are lovingly assembled, modified and assembled by hand. Each of them is unique and differs in model, colour, veneer grain. The high-quality cases are restored or newly manufactured in qualified craftsmanship. Electrical components are checked, moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. The customer receives a top-class device.Item description:limit switch:      Noinner plate: metalSpindle:                    10mmbasic dimensions:             Width: 525mm, depth: 413mm, height 97mmThe following work is carried out:Revision of electronic and mechanical componentschange or Installation required componentsSetting and balancing the different speedsSetting and adjusting the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire turntableExecution of an endurance testHousing:Painted in your desired color!The housing consists of 40mm side panels and a 16mm thick MDF base. It is painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the case back. The bottom is bolted to the frame and can be easily removed.cover plate:The cover plate is painted in your desired color!Tonearm base:The tonearm base is painted in your desired color!Device feet:There are four height-adjustable ones on the bottom of the case SPIKES installed in chromed stainless steel.Pickup Ortofon VM Alpha (included):With the VM series, Ortofon has long created the reference MM pickup, the long production time and the characteristic stylus body are well known all over the world. The VM Alpha is the entry into the series and is a super entry-level system for medium-priced turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot.Audio cable:brand cable. Ready-made analog audio cinch cable for wiring turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-nature signal transmission. Contact security and protection against corrosion is guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality.Turntable:The turntable is made in five laborious and time-consuming steps polished to a high gloss. The mirror finish gives your turntable a unique look.With surface sealing by a special protective coating against repeated tarnishing and for a long-lasting shine. Drive belt:This drive belt is manufactured to original Thorens specifications (same material and dimensions).The following parts are as accessoriesuhright riseetcdaily and not component this auction:the following parts are available like accessories other not included in this auction:Hood to put on the case: 160Device feet:Height adjustable, made of stainless steel. The contact surface to the base is reduced to a minimum by 3 rubber buffers.Resonance and feedback are thus effectively prevented.XL (see picture 11 and 12): 84XXL (see picture 9 and 10): 130Cartridge MM System including installation: Ortofon VinylMaster Red (naked elliptical cut):             220Ortofon VinylMaster Silver (nude Fritz Gyger 70 cut):        470 Ortofon 2MRed (elliptical):             99Ortofon 2M Blue (diamond cut):   220Ortofon 2M Bronze (Fineline diamond cut): 390 Ortofon 2M Black (Shibata diamond cut):         599 Ortofon 2M Black LVB 250 (Shibata diamond cut):              945audio-technica VM740ML Dual MM (Microlinear needle):        339audio technica VM750SH Dual MM (Shibata Needle):                439 audio-technica VM760SLC Dual MM (Special Line Contact):  699Cartridge MC System including installation: audio-technica AT-OC9XML Dual MC (Microlinear Needle):    599 audio technica AT-OC9XSH Dual MC (Shibata needle grind):  699 audio-technica AT-OC9XSLDual MC (Special Line Contact): 799The housing consists of 40mm side panels and a 16mm thick MDF base. It is painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the case back. The bottom is bolted to the frame and can be easily removed. With the VM series, Ortofon has long created the reference MM pickup, the long production time and the characteristic stylus body are well known all over the world. The VM Alpha is the entry into the series and is a super entry-level system for medium-priced turntables. brand cable. Ready-made analog audio cinch cable for wiring turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free coppThe housing consists of 40mm side panels and a 16mm thick MDF base. It is painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the case back. The bottom is bolted to the frame and can be easily removed. With the VM series, Ortofon has long created the reference MM pickup, the long production time and the characteristic stylus body are well known all over the world. The VM Alpha is the entry into the series and is a super entry-level system for medium-priced turntables. brand cable. Ready-made analog audio cinch cable for wiring turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copp Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modifizierter Artikel Ja Modell TD 125 MKII Herstellernummer nicht zutreffend Ausländisches Produkt Ja Herstellungsland und -region Deutschland

Revised Thorens TD 125 MKII Turntable Black Orange Sme 3009 Series IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time specified on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored Thorens TD125 MKII with SME 3009 Series III Our turntables are lovingly assembled, modified and assembled by hand. Each of them is unique and differs in model, colour, veneer grain. The high-quality cases are restored or newly manufactured in qualified craftsmanship. Electrical components are checked, moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. The customer receives a top-class device.Item description:limit switch:      Noinner plate: metalSpindle:                    10mmbasic dimensions:             Width: 525mm, depth: 413mm, height 97mmThe following work is carried out:Revision of electronic and mechanical componentschange or Installation required componentsSetting and balancing the different speedsSetting and adjusting the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire turntableExecution of an endurance testHousing:The housing consists of 40mm side panels and a 16mm thick MDF base. The surface was painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the case back. The bottom is bolted to the frame and can be easily removed.Device feet:There are four height-adjustable ones on the bottom of the case SPIKES installed in chromed stainless steel. The bottom is bolted to the frame and can be easily removed.Pickup Ortofon VM Alpha (included):With the VM series, Ortofon has long created the reference MM pickup, the long production time and the characteristic stylus body are well known all over the world. The VM Alpha is the entry into the series and is a super entry-level system for medium-priced turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot.Audio cable:brand cable. Ready-made analog audio cinch cable for wiring turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-nature signal transmission. Contact security and protection against corrosion is guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality.Turntable:The turntable is made in five laborious and time-consuming steps polished to a high gloss. The mirror finish gives your turntable a unique look.With surface sealing by a special protective coating against repeated tarnishing and for a long-lasting shine. Drive belt:This drive belt is manufactured to original Thorens specifications (same material and dimensions).The following parts are as accessoriesuhright riseetcdaily and not component this auction:the following parts are available like accessories other not included in this auction:Hood: The hood is a new product (replica) with a wall thickness of 4mm, extremely stable, Plexiglas XT, absolutely colorless and clear, unbreakable to impact-resistant, weather-u. age-resistant, high-quality surface and planarity: 160XXL device feet (Picture 9-12):Solid stainless steel, height adjustable, total weight 2.5kg, diameter 65mm: 129Cartridge MM System including installation:Ortofon VM Red (bare elliptical cut): 199Ortofon VM Silver (Nude Fritz Gyger 70 cut): 435Ortofon 2M Red (elliptical): 99Ortofon 2M Blue (elliptical, naked): 199Ortofon 2M Bronze (Fineline): 360Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata, boron cantilever): 899Cartridge MC System including installation: Audio-technica AT-OC9XML (Microlinear): 599Audio-technica AT-OC9XSH (Shibata): 699Audio-technica AT-OC9XSL (Special Line Contact): 799The housing consists of 40mm side panels and a 16mm thick MDF base. The surface was painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the case back. The bottom is bolted to the frame and can be easily removed. With the VM series, Ortofon has long created the reference MM pickup, the long production time and the characteristic stylus body are well known all over the world. The VM Alpha is the entry into the series and is a super entry-level system for medium-priced turntables. brand cable. Ready-made analog audio cinch cable for wiring turntables! Thanks to the particularly high-quality inner conductor made of oxygenThe housing consists of 40mm side panels and a 16mm thick MDF base. The surface was painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the case back. The bottom is bolted to the frame and can be easily removed. With the VM series, Ortofon has long created the reference MM pickup, the long production time and the characteristic stylus body are well known all over the world. The VM Alpha is the entry into the series and is a super entry-level system for medium-priced turntables. brand cable. Ready-made analog audio cinch cable for wiring turntables! Thanks to the particularly high-quality inner conductor made of oxygen Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe Schwarz Modell TD 125 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Sie können die Farbe des Gehäuses, der Deckplatte und der Tonarmbasis selber auswählen.You can choose the color of the housing, the cover plate and the tonearm base yourself. Individuelle Anfertigung! Bitte beachten Sie, die bei Ebay angegebene Bearbeitungszeit! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Bei Selbstabholung 70,00 € Rabatt! Restaurierter Thorens TD125 MKII mit SME 3009 Series III Unsere Plattenspieler werden in liebevoller Handarbeit zusammengestellt, modifiziert und montiert. Jeder von ihnen ist ein Unikat und unterscheidet sich in Modell, Farbe, Furnier-maserung. Die hochwertigen Gehäuse werden in qualifizierter Handwerksarbeit restauriert oder neu angefertigt. Elektrische Bauteile werden überpüft, beweglichen Teile geölt und Verschleißteile ausgetauscht. Einen abschließender Dauerlauftest runden die aufwendigen Arbeiten ab. Der Kunde erhält ein Gerät der Spitzenklasse. Artikelbeschreibung: Endabschaltung: NeinInnenteller: MetallSpindel: 10 mmGrundmaße: Breite: 525mm, Tiefe: 413mm, Höhe 97mm Folgende Arbeiten werden durchgeführt:Revision elektronischer und mechanischer BauteileUm- bzw. Einbau benötigten KomponentenEinstellung und Abgleich der verschiedenen GeschwindigkeitenEinstellung und Justierung der FederungÜberprüfung und Justierung des Tonarmes und des Tonabnehmers Gründliche Reinigung des gesamten PlattenspielersAusführung eines Dauerlauftestes Gehäuse: Lackierung in Ihrer Wunschfarbe! Das Gehäuse besteht aus 40mm Seitenteilen und einem 16 mm starken Boden aus MDF. Es wird mit mehreren Farbschichten lackiert und anschließend mit Klarlack versiegelt. An der Rückseite befindet sich das Anschlusspanel für alle benötigten Kabel. Am Gehäuseboden sind vier höhenverstellbare Spikes aus verchromten Edelstahl installiert. Der Boden ist mit dem Rahmen verschraubt und kann leicht entfernt werden. Deckplatte: Die Deckplatte wird in Ihrer Wunschfarbe lackiert! Tonarmbasis: Die Tonarmbasis wird in Ihrer Wunschfarbe lackiert! Gerätefüße: Am Gehäuseboden sind vier höhenverstellbare SPIKES aus verchromten Edelstahl installiert. Tonabnehmer Ortofon VM Alpha (inklusive): Mit der VM-Serie hat Ortofon seit langem die Referenz MM-Tonabnehmer geschaffen, die lange Produktionszeit und der charakteristische Nadelkorpus sind auf der ganzen Welt ein Begriff. Das VM Alpha ist der Einstieg in die Serie und ist ein Super Einstiegssystem für Plattenspieler der mittleren Preislage.Die VM Reihe von Ortofon ist untereinander kompatibel. Sie können also mit einem VM Alpha starten und dann mit dem passenden Nadeleinschub die Qualität verbessern, indem Sie den nächst höheren Nadeleischub verwenden. Audiokabel: Markenkabel. Fertig konfektioniertes analoges Audio-Cinchkabel für die Verkabelung von Plattenspielern! Durch den besonders hochwertigen Innenleiter aus sauerstofffreiem Kupfer (OFC) sorgt dieses Qualitätskabel für eine naturgetreue Signalübertragung. Kontaktsicherheit und Korrosionsschutz ist über die 24 Karat vergoldeten Steckerkontakte garantiert. Das Kabel hat ein neutrales Klangbild mit guter Dynamik und Räumlichkeit. Plattenteller: In fünf aufwendigen und zeitintensiven Arbeitsschritten, wird der Plattenteller auf Hochglanz poliert. Die Hochglanzpolitur verleit Ihrem Plattenspieler ein einzigartiges Aussehen.Mit Oberflächenversiegelung durch eine spezielle Schutzlackierung, gegen wiederholtes Anlaufen und für einen langanhaltenden Glanz. Antriebsriemen: Dieser Antriebsriemen wird nach den ursprünglichen Thorens Spezifikationen (gleiches Material und gleiche Abmessungen) gefertigt. Folgende Teile sind als Zubehör erhältlich und nicht Bestandteil dieser Auktion:The following parts are available as accessories and not included in this auction: Haube zum Auflegen auf das Gehäuse: 160 Gerätefüße: Höhenverstellbar, aus Edelstahl. Die Kontaktfläche zur Unterlage wird durch 3 Gummipuffer auf ein Minimum reduziert.Resonanzen und Rückkopplungen werden somit effektiv verhindert. XL (siehe Bild 11 und 12): 84 XXL (siehe Bild 9 und 10): 130 Cartridge MM System including installation: Ortofon VinylMaster Red (nackter elliptischer Schliff): 220 Ortofon VinylMaster Silver (nude Fritz Gyger 70-Schliff): 470 Ortofon 2MRed (elliptisch): 99 Ortofon 2M Blue (Diamantschliff): 220 Ortofon 2M Bronze (Fineline-Diamantschliff): 390 Ortofon 2M Black (Shibata-Diamantschliff): 599 Ortofon 2M Black LVB 250 (Shibata-Diamantschliff): 945audio-technica VM740ML Dual MM (Microlinear-Nadel): 339 audio-technica VM750SH Dual MM (Shibata-Nadel): 439 audio-technica VM760SLC Dual MM (Special-Line-Contact): 699 Cartridge MC System including installation: audio-technica AT-OC9XML Dual MC (Microlinear-Nadel): 599 audio-technica AT-OC9XSH Dual MC (Shibata Nadelschliff): 699 audio-technica AT-OC9XSL Dual MC (Special-Line-Contact): 799

Revisionato Thorens TD 125 MKII Giradischi Nero Arancione Sme 3009 Serie IIILa descrizione di questo articolo è stata tradotta automaticamente. Se hai dubbi o domande, ti invitiamo a contattarci.Produzione individuale! Si prega di notare il tempo di elaborazione specificato su Ebay! Produzione individuale! Si prega di notare il tempo di elaborazione specificato su Ebay! Questo giradischi è disponibile in 220V/50Hz o 110V/60Hz (ad esempio Stati Uniti) Thorens TD125 MKII restaurato con SME 3009 Serie III I nostri giradischi sono accuratamente assemblati, modificati e assemblati a mano. Ognuno di essi è unico e si differenzia per modello, colore, venatura dellimpiallacciatura. Le custodie di alta qualità vengono restaurate o prodotte ex novo in maestria qualificata. I componenti elettrici vengono controllati, parti mobili oliate e parti soggette ad usura sostituite. Un ultimo test di resistenza completa il complesso lavoro. Il cliente riceve un dispositivo di prima classe.Descrizione dellarticolo:finecorsa:      NOpiatto interno: metalloMandrino:                    10 mmdimensioni base:             Larghezza: 525 mm, profondità: 413 mm, altezza 97 mmSi esegue il seguente lavoro:Revisione di componenti elettronici e meccaniciordine o Componenti richiesti per linstallazioneImpostazione e bilanciamento delle diverse velocitàImpostazione e regolazione della sospensioneControllo e regolazione del braccio e della testina Pulizia accurata dellintero piatto girevoleEsecuzione di una prova di resistenzaAbitazione:Lalloggiamento è costituito da pannelli laterali da 40 mm e una base in MDF spessa 16 mm. La superficie è stata dipinta con diversi strati di vernice e poi sigillata con vernice trasparente. Il pannello di connessione per tutti i cavi necessari si trova sul retro. Sul fondello sono installate quattro punte regolabili in altezza in acciaio inossidabile cromato. Il fondo è imbullonato al telaio e può essere facilmente rimosso.Piedi del dispositivo:Ce ne sono quattro regolabili in altezza sul fondo della custodia PUNTE installato in acciaio inossidabile cromato. Il fondo è imbullonato al telaio e può essere facilmente rimosso.Ritiro Ortofon VM Alpha (incluso):Con la serie VM, Ortofon ha da tempo creato il pickup MM di riferimento, i lunghi tempi di produzione e il caratteristico corpo della puntina sono ben noti in tutto il mondo. Il VM Alpha è lingresso nella serie ed è un sistema super entry-level per giradischi di fascia media.La serie VM di Ortofon è compatibile tra loro. Quindi puoi iniziare con un VM Alpha e quindi migliorare la qualità con lo slot dellago appropriato utilizzando lo slot dellago immediatamente superiore.Cavo audio:cavo di marca. Cavo cinch audio analogico già pronto per il cablaggio dei giradischi! Grazie al conduttore interno particolarmente pregiato in rame privo di ossigeno (OFC), questo cavo di qualità garantisce una trasmissione naturale del segnale. La sicurezza dei contatti e la protezione dalla corrosione sono garantite dai contatti a spina placcati oro 24 carati. Il cavo ha un suono neutro con una buona dinamica e spazialità.Giradischi:Il giradischi è realizzato in cinque passaggi laboriosi e dispendiosi in termini di tempo lucidato a specchio. La finitura a specchio conferisce al tuo giradischi un aspetto unico.Con sigillatura della superficie mediante uno speciale rivestimento protettivo contro lossidazione ripetuta e per una brillantezza di lunga durata. Cintura di sicurezza:Questa cinghia di trasmissione è prodotta secondo le specifiche originali Thorens (stesso materiale e dimensioni).Il seguente parti Sono COME AccessoriuhGiusto salitaecceteraquotidiano E non componente Questo asta:IL seguente parti Sono disponibile Piace Accessori altro non incluso In Questo asta:Cappuccio: Il cappuccio è un nuovo prodotto (replica) con uno spessore della parete di 4 mm, estremamente stabile, Plexiglas XT, assolutamente incolore e trasparente, infrangibile a resistente agli urti, agli agenti atmosferici. superficie e planarità resistenti allinvecchiamento e di alta qualità: 160Piedi del dispositivo XXL (Figura 9-12):Solido acciaio inossidabile, regolabile in altezza, peso totale 2,5 kg, diametro 65 mm: 129Cartuccia MM System inclusa linstallazione:Ortofon VM Rosso (taglio ellittico nudo): 199Ortofon VM argento (Nudo Fritz Gyger taglio 70): 435Ortofon 2M Rosso (ellittico): 99Ortofon 2M Blu (ellittico, nudo): 199Ortofon 2M Bronzo (fine linea): 360Ortofon 2M Nero (Shibata): 599Ortofon 2M Black LVB 250 (Shibata, cantilever al boro): 899Cartuccia Sistema MC inclusa installazione: Audiotecnica AT-OC9XML (Microlineare): 599Audio-tecnica AT-OC9XSH (Shibata): 699Audio-technica AT-OC9XSL (contatto linea speciale): 799Lalloggiamento è costituito da pannelli laterali da 40 mm e una base in MDF spessa 16 mm. La superficie è stata dipinta con diversi strati di vernice e poi sigillata con vernice trasparente. Il pannello di connessione per tutti i cavi necessari si trova sul retro. Sul fondello sono installate quattro punte regolabili in altezza in acciaio inossidabile cromato. Il fondo è imbullonato al telaio e può essere facilmente rimosso. cavo di marca. Cavo cinch audio analogico già pronto per il cablaggio dei giradischi! Grazie al conduttore interno particolarmente pregiato in rame privo di ossigeno (OFC), questo cavo di qualità garantisce una trasmissione naturale del segnale. La sicurezza dei contatti e la protezione dalla corrosione sono garantite dai contatti a spina placcati oro 24 carati. Il ca Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe Schwarz Modell TD 125 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Restored Thorens TD 125 MKII Turntable Also Sme 3009 PossibleThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.This turntable is available for 220V-240V (50/60Hz) or 100V-130V (50/60Hz) - for example USA and worldwideIndividual production! Please note the processing time specified on Ebay!Individual production! Please note the processing time specified on Ebay!Revised by ART AND SOUND Restored 125 MKII in flight green and stainless steelAlso possible with different SME 3009 tonearms20kg turntableOur turntables are lovingly assembled, restored and assembled by hand.Each of them is unique and differs in model, colour, veneer grain or other details.The high-quality cases are restored or newly manufactured in qualified craftsmanship.Electrical components are checked, moving parts oiled and wearing parts replaced.A final endurance test completes the complex work.Item description:limit switch:      Noinner plate: metalSpindle: 10mmbasic dimensions:            Width: 525mm, depth: 413mm, height 97mThe following work is carried out:Revision of electronic and mechanical componentsorder or Installation required componentsSetting and balancing the different speedsSetting and adjusting the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire turntableExecution of endurance testHousing:The housing consists of 40mm MDF side panels and a 16mm thick floor, also made of MDF. The surface was painted several times and then polished. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the case back. The bottom is bolted to the frame and can be easily removed.Basic dimensions of the frame (without feet): 525mm x 413mm x 97mmWeight (without feet): 6.3 kgOrtofon VM Alpha cartridge (included):With the VM series, Ortofon has long created the reference MM pickup, the long production time and the characteristic stylus body are well known all over the world. The VM Alpha is the entry into the series and is a super entry-level system for medium-priced turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot.Audio cable:brand cable. Ready-made analog audio cinch cable for wiring turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures natural signal transmission. Contact security and protection against corrosion is guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality.Record weight made of stainless steel:With a weight of 310g, it ensures that the record lies flat on the platter and runs smoothly. This record weight plays in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis has been readjusted accordingly. By using it, you increase the sound performance of your system.Turntable:The turntable is made in five laborious and time-consuming steps polished to a high gloss. The high-gloss polish gives your record player a unique look. With surface sealing by a special protective coating against repeated tarnishing and for a long-lasting shine. Drive belt:The drive belt is manufactured to original Thorens specifications (same material and dimensions).The following Parts are as accessoriesuhr riseetcdaily and not component this auction:the following parts are available like accessories other not included in this auction:Hood:for placing on the housing: 160 Device feet XXL: 90Height adjustable, made of stainless steel. The contact area with the base is reduced to a minimum by 3 rubber buffers.Resonance and feedback are thus effectively prevented. Total weight 2520g, diameter 65mm, height 26mmSME tonearms (the matching systems are selected according to the tonearms): SME Series III (replaceable tonearm tube, eff. Mass approx. 5g): 590 SME 3009 improved (fixed headshell, eff. Mass 6.5g): 690 SME 3009 S2 improved (replaceable headshell, eff. Mass 9.5g): 690 SME 3009 Series II (replaceable headshell, eff. Mass 12.5g): 790 Cartridge MM System including installation: AUDIO-TECHNICA VM 740ML (Microlinear): 339 AUDIO-TECHNICA VM 750 SH (Shibata): 439 AUDIO-TECHNICA VM 760 SLC (special line): 699Ortofon 2M Red (elliptical): 109Ortofon 2M Blue (elliptical, naked): 229Ortofon 2M Bronze (Fineline): 390Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata with boron cantilever): 899 Cartridge MC System including installation: ORTOFON Quintet Red (elliptical): 330 ORTOFON Quintet Blue (elliptical, naked): 470 ORTOFON Quintet Bronze (Fineline): 660 ORTOFON Quinted Black (Shibata): 940 ORTOFON Cadenza Red (Fineline): 1299 AUDIO-TECHNICA AT-OC9XEB (elliptical): 279AUDIO-TECHNICA AT-OC9XEN (elliptical, naked): 369 AUDIO-TECHNICA AT-33EV (elliptical): 499AUDIO-TECHNICA AT-33PTG/II (Microlinear): 599AUDIO-TECHNICA AT-33SA (Shibata): 799With the VM series, Ortofon has long created the reference MM pickup, the long production time and the characteristic stylus body are well known all over the world. The VM Alpha is the entry into the series and is a super entry-level system for medium-priced turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot. With a weight of 310g, it ensures that the record lies flat on the platter and runs smoothly. This record weight plays in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis has been readjusted accordi Antriebstyp Riemenantrieb Marke Thorens EAN Nicht zutreffend Modell TD 125 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Revised Thorens TD 125 MKII Turntable With Sme 3009 Birnenholz OiledThe description of this item has been automatically translated. If you have any questions, please feel free to contact us. With the VM series, Ortofon has long created the reference MM pickup, the long production time and the characteristic stylus body are well known all over the world. The VM Alpha is the entry into the series and is a great entry-level system for mid-range turntables. The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot. With a weight of 310g, it ensures that the record sits smoothly on the plate and runs smoothly. This record weight is in the middle weight class. It builds up just enough weight to dampen the vibrations of the plate without putting any strain on the bearing bushes. The suspension of the Thorens sub-chassis was readjusted accordingly. By usi Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Modell TD 125 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Revised Thorens TD 125 MKII Turntable Black Orange Sme 3009 Series IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time specified on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored Thorens TD125 MKII with SME 3009 Series III Our turntables are lovingly assembled, modified and assembled by hand. Each of them is unique and differs in model, colour, veneer grain. The high-quality cases are restored or newly manufactured in qualified craftsmanship. Electrical components are checked, moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. The customer receives a top-class device.Item description:limit switch:      Noinner plate: metalSpindle:                    10mmbasic dimensions:             Width: 525mm, depth: 413mm, height 97mmThe following work is carried out:Revision of electronic and mechanical componentschange or Installation required componentsSetting and balancing the different speedsSetting and adjusting the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire turntableExecution of an endurance testHousing:The housing consists of 40mm side panels and a 16mm thick MDF base. The surface was painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the case back. The bottom is bolted to the frame and can be easily removed.Device feet:There are four height-adjustable ones on the bottom of the case SPIKES installed in chromed stainless steel. The bottom is bolted to the frame and can be easily removed.Pickup Ortofon VM Alpha (included):With the VM series, Ortofon has long created the reference MM pickup, the long production time and the characteristic stylus body are well known all over the world. The VM Alpha is the entry into the series and is a super entry-level system for medium-priced turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot.Audio cable:brand cable. Ready-made analog audio cinch cable for wiring turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-nature signal transmission. Contact security and protection against corrosion is guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality.Turntable:The turntable is made in five laborious and time-consuming steps polished to a high gloss. The mirror finish gives your turntable a unique look.With surface sealing by a special protective coating against repeated tarnishing and for a long-lasting shine. Drive belt:This drive belt is manufactured to original Thorens specifications (same material and dimensions).The following parts are as accessoriesuhright riseetcdaily and not component this auction:the following parts are available like accessories other not included in this auction:Hood: The hood is a new product (replica) with a wall thickness of 4mm, extremely stable, Plexiglas XT, absolutely colorless and clear, unbreakable to impact-resistant, weather-u. age-resistant, high-quality surface and planarity: 160XXL device feet (Picture 9-12):Solid stainless steel, height adjustable, total weight 2.5kg, diameter 65mm: 129Cartridge MM System including installation:Ortofon VM Red (bare elliptical cut): 199Ortofon VM Silver (Nude Fritz Gyger 70 cut): 435Ortofon 2M Red (elliptical): 99Ortofon 2M Blue (elliptical, naked): 199Ortofon 2M Bronze (Fineline): 360Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata, boron cantilever): 899Cartridge MC System including installation: Audio-technica AT-OC9XML (Microlinear): 599Audio-technica AT-OC9XSH (Shibata): 699Audio-technica AT-OC9XSL (Special Line Contact): 799The housing consists of 40mm side panels and a 16mm thick MDF base. The surface was painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the case back. The bottom is bolted to the frame and can be easily removed. With the VM series, Ortofon has long created the reference MM pickup, the long production time and the characteristic stylus body are well known all over the world. The VM Alpha is the entry into the series and is a super entry-level system for medium-priced turntables. brand cable. Ready-made analog audio cinch cable for wiring turntables! Thanks to the particularly high-quality inner conductor made of oxygen Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe Schwarz Modell TD 125 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Revised Thorens TD 125 MKII Turntable Black Orange Sme 3009 Series IIIThe description of this item has been automatically translated. If you have any questions, please feel free to contact us.Individual production! Please note the processing time specified on Ebay! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Restored Thorens TD125 MKII with SME 3009 Series III Our turntables are lovingly assembled, modified and assembled by hand. Each of them is unique and differs in model, colour, veneer grain. The high-quality cases are restored or newly manufactured in qualified craftsmanship. Electrical components are checked, moving parts oiled and wearing parts replaced. A final endurance test completes the complex work. The customer receives a top-class device.Item description:limit switch:      Noinner plate: metalSpindle:                    10mmbasic dimensions:             Width: 525mm, depth: 413mm, height 97mmThe following work is carried out:Revision of electronic and mechanical componentschange or Installation required componentsSetting and balancing the different speedsSetting and adjusting the suspensionChecking and adjusting the tonearm and cartridge Thorough cleaning of the entire turntableExecution of an endurance testHousing:The housing consists of 40mm side panels and a 16mm thick MDF base. The surface was painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the case back. The bottom is bolted to the frame and can be easily removed.Device feet:There are four height-adjustable ones on the bottom of the case SPIKES installed in chromed stainless steel. The bottom is bolted to the frame and can be easily removed.Pickup Ortofon VM Alpha (included):With the VM series, Ortofon has long created the reference MM pickup, the long production time and the characteristic stylus body are well known all over the world. The VM Alpha is the entry into the series and is a super entry-level system for medium-priced turntables.The VM series from Ortofon is compatible with each other. So you can start with a VM Alpha and then improve the quality with the appropriate needle slot by using the next higher needle slot.Audio cable:brand cable. Ready-made analog audio cinch cable for wiring turntables! Thanks to the particularly high-quality inner conductor made of oxygen-free copper (OFC), this quality cable ensures true-to-nature signal transmission. Contact security and protection against corrosion is guaranteed by the 24 carat gold-plated plug contacts. The cable has a neutral sound with good dynamics and spatiality.Turntable:The turntable is made in five laborious and time-consuming steps polished to a high gloss. The mirror finish gives your turntable a unique look.With surface sealing by a special protective coating against repeated tarnishing and for a long-lasting shine. Drive belt:This drive belt is manufactured to original Thorens specifications (same material and dimensions).The following parts are as accessoriesuhright riseetcdaily and not component this auction:the following parts are available like accessories other not included in this auction:Hood: The hood is a new product (replica) with a wall thickness of 4mm, extremely stable, Plexiglas XT, absolutely colorless and clear, unbreakable to impact-resistant, weather-u. age-resistant, high-quality surface and planarity: 160XXL device feet (Picture 9-12):Solid stainless steel, height adjustable, total weight 2.5kg, diameter 65mm: 129Cartridge MM System including installation:Ortofon VM Red (bare elliptical cut): 199Ortofon VM Silver (Nude Fritz Gyger 70 cut): 435Ortofon 2M Red (elliptical): 99Ortofon 2M Blue (elliptical, naked): 199Ortofon 2M Bronze (Fineline): 360Ortofon 2M Black (Shibata): 599Ortofon 2M Black LVB 250 (Shibata, boron cantilever): 899Cartridge MC System including installation: Audio-technica AT-OC9XML (Microlinear): 599Audio-technica AT-OC9XSH (Shibata): 699Audio-technica AT-OC9XSL (Special Line Contact): 799The housing consists of 40mm side panels and a 16mm thick MDF base. The surface was painted with several layers of paint and then sealed with clear varnish. The connection panel for all required cables is located on the back. Four height-adjustable spikes made of chrome-plated stainless steel are installed on the case back. The bottom is bolted to the frame and can be easily removed. With the VM series, Ortofon has long created the reference MM pickup, the long production time and the characteristic stylus body are well known all over the world. The VM Alpha is the entry into the series and is a super entry-level system for medium-priced turntables. brand cable. Ready-made analog audio cinch cable for wiring turntables! Thanks to the particularly high-quality inner conductor made of oxygen Antriebstyp Riemenantrieb Marke Thorens - Restauriert von Art-and-Sound EAN Nicht zutreffend Farbe Schwarz Modell TD 125 MKII Herstellernummer nicht zutreffend Herstellungsland und -region Deutschland

Individuelle Anfertigung! Bitte beachten Sie, die bei Ebay angegebene Bearbeitungszeit! Individual production! Please note the processing time specified on Ebay! This turntable is available in 220V/ 50Hz or 110V/60Hz (for example USA) Bei Selbstabholung 70,00 € Rabatt! Restaurierter Thorens TD125 MKII mit SME 3009 Series III Unsere Plattenspieler werden in liebevoller Handarbeit zusammengestellt, modifiziert und montiert. Jeder von ihnen ist ein Unikat und unterscheidet sich in Modell, Farbe, Furnier-maserung. Die hochwertigen Gehäuse werden in qualifizierter Handwerksarbeit restauriert oder neu angefertigt. Elektrische Bauteile werden überpüft, beweglichen Teile geölt und Verschleißteile ausgetauscht. Einen abschließender Dauerlauftest runden die aufwendigen Arbeiten ab. Der Kunde erhält ein Gerät der Spitzenklasse. Artikelbeschreibung: Endabschaltung: NeinInnenteller: MetallSpindel: 10 mmGrundmaße: Breite: 525mm, Tiefe: 413mm, Höhe 97mm Folgende Arbeiten werden durchgeführt:Revision elektronischer und mechanischer BauteileUm- bzw. Einbau benötigten KomponentenEinstellung und Abgleich der verschiedenen GeschwindigkeitenEinstellung und Justierung der FederungÜberprüfung und Justierung des Tonarmes und des Tonabnehmers Gründliche Reinigung des gesamten PlattenspielersAusführung eines Dauerlauftestes Gehäuse: Das Gehäuse besteht aus 40mm Seitenteilen und einem 16 mm starken Boden aus MDF. Die Oberfläche wurde mit mehreren Farbschichten lackiert und anschließend mit Klarlack versiegelt. An der Rückseite befindet sich das Anschlusspanel für alle benötigten Kabel. Am Gehäuseboden sind vier höhenverstellbare Spikes aus verchromten Edelstahl installiert. Der Boden ist mit dem Rahmen verschraubt und kann leicht entfernt werden. Gerätefüße: Am Gehäuseboden sind vier höhenverstellbare SPIKES aus verchromten Edelstahl installiert. Der Boden ist mit dem Rahmen verschraubt und kann leicht entfernt werden. Tonabnehmer Ortofon VM Alpha (inklusive): Mit der VM-Serie hat Ortofon seit langem die Referenz MM-Tonabnehmer geschaffen, die lange Produktionszeit und der charakteristische Nadelkorpus sind auf der ganzen Welt ein Begriff. Das VM Alpha ist der Einstieg in die Serie und ist ein Super Einstiegssystem für Plattenspieler der mittleren Preislage.Die VM Reihe von Ortofon ist untereinander kompatibel. Sie können also mit einem VM Alpha starten und dann mit dem passenden Nadeleinschub die Qualität verbessern, indem Sie den nächst höheren Nadeleischub verwenden. Audiokabel: Markenkabel. Fertig konfektioniertes analoges Audio-Cinchkabel für die Verkabelung von Plattenspielern! Durch den besonders hochwertigen Innenleiter aus sauerstofffreiem Kupfer (OFC) sorgt dieses Qualitätskabel für eine naturgetreue Signalübertragung. Kontaktsicherheit und Korrosionsschutz ist über die 24 Karat vergoldeten Steckerkontakte garantiert. Das Kabel hat ein neutrales Klangbild mit guter Dynamik und Räumlichkeit. Plattenteller: In fünf aufwendigen und zeitintensiven Arbeitsschritten, wird der Plattenteller auf Hochglanz poliert. Die Hochglanzpolitur verleit Ihrem Plattenspieler ein einzigartiges Aussehen.Mit Oberflächenversiegelung durch eine spezielle Schutzlackierung, gegen wiederholtes Anlaufen und für einen langanhaltenden Glanz. Antriebsriemen: Dieser Antriebsriemen wird nach den ursprünglichen Thorens Spezifikationen (gleiches Material und gleiche Abmessungen) gefertigt. Folgende Teile sind als Zubehör erhältlich und nicht Bestandteil dieser Auktion:The following parts are available as accessories and not included in this auction: Haube: Die Haube ist eine Neuanfertigung (Nachbau) mit einer Wandstärke von 4mm, äußerst stabil, Plexiglas XT, absolut farblos und klar, bruchfest bis schlagzäh, witterungs-u. alterungsbeständig, hochqualitative Oberfläche und Planität: 160 XXL Gerätefüße (Bild 9-12): Edelstahl massiv, höhenverstellbar, Gesamtgewicht 2,5kg, Durchmesser 65mm: 129 Cartridge MM System including installation: Ortofon VM Red (nackter elliptischer Schliff): 199 Ortofon VM Silver (Nude Fritz Gyger 70-Schliff): 435 Ortofon 2M Red (elliptisch): 99 Ortofon 2M Blue (elliptisch, nackt): 199 Ortofon 2M Bronze (Fineline): 360 Ortofon 2M Black (Shibata): 599 Ortofon 2M Black LVB 250 (Shibata, Bor-Nadelträger): 899Cartridge MC System including installation: Audio-technica AT-OC9XML (Microlinear): 599 Audio-technica AT-OC9XSH (Shibata): 699Audio-technica AT-OC9XSL (Special Line Contact): 799