Tested and works. Comes with a power cord, but no remote.

Ideal for demanding custom installations, the ultra-stable RB-1050 combines audiophile sound quality and bullet-proof circuitry. A multi-mode amplifier, the RB-1050 develops 70 watts per channel for stereo reproduction. Individual sensitivity adjustments and auto on signal sensing circuitry allow use with a variety of distribution devices or processors. Buffered line level outputs allow multiple amplifiers to daisy chain from a single source. The toroid-based power supply and high damping factor ensure precise control of virtually all speakers. 12 volt trigger jacks and a detachable AC cord make this amplifier ideal for remote operated distributed audio systems. A front panel LED array shows clipping and protection modes for quick system analysis. Specifications Power output: 70 watts per channel into 8? (stereo) Frequency response: 10Hz to 100kHz Total harmonic distortion: 0.03% Damping factor: 500 Input sensitivity: 1V Signal to noise ratio: 116dB Speaker load impedance: 4? (minimum) Dimensions: 430 x 92 x 350mm Weight: 8.1kg ****No power cord***

ROTEL RX-1050 A/V Receiver Used, Working Perfectly Including power cord, no remote control Specifications Output Power 100 WPC continuous 20~20,000 Hz at 0.05% THD into 8?.0.05% SMPTE IMD at 100 WPC. Frequency ResponseLine level input: 10 Hz - 70 kHz ±3 dB. Phono input: 20Hz-20kHz ±1dB. Tone Controls±8 dB at 100 Hz and 10 kHz. SNRLine level input: 92 dB A, IHF. Phono input: 74 dB A, IHF. Maximum Input LevelsLine level input: 5 V.Phono input: > 120 mV. FM75? coaxial euro connector.87.5 ~ 108.0 MHz in 200 kHz steps.1.3 V output.Only one default bandwidth.2.0 dB capture ratio.14.2 dBf usable.20.2 dBf mono, 45.3 dBf stereo for 50dB quieting.70 dB SNR mono, 65 dB SNR stereo at 65 dBf.0.3% THD mono, 0.5% THD stereo at 65 dBf.30 Hz ~ 14 kHz ±1.5 dB.47 dB selectivity at ±400 kHz.80 dB spurious response ratio.65 dB image rejection.80 dB IF response ratio.52 dB AM suppression.40 dB separation at 100 Hz, 45 dB at 1 kHz and 35 dB at 10 kHz. AM520 ~ 1710 kHz in standard 10 kHz steps.Loop antenna input. Rated 500 ?V/m, which is weird since there is no ferrite bar antenna, just a loop to connect to the back.Only one default bandwidth.25 dB selectivity.35 dB image response ratio.40 dB SNR.250 mV output. Video1 Volt p-p 75? composite.3 Hz ~ 10 MHz ±3 dB.45 dB SNR. QualityMade in China. Packaging Corrugated cardboard box.Supported by two pieces of expanded polystyrene top and bottom. Rated Power Consumption300W. Size17 x 4-3/4 x 14-1/8 WHD. 432 x 121 x 359 mm WHD.Height with feet removed: 7 (176mm). Weight22.7 lbs. (10.3kg). PLESE SEE PHOTOS FOR ALL THE DETAILS.PLESE CHECK MY STORE AND OTHR ITEMS ALL ITEMS ARE TESTED BEFORE LISTING AND BEFORE SHIPPING. All listings can be canceled without any noticedWe use some other sites for selling to local and international customers If item is used, it has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. CHECK MY FEEDBACK AND BUY WITH CONFIDENCE. POLICY:Buyers have 14 days after the delivery to return the item if return is accept in that sale.We ask all buyers to email us before opening a EBAY CLAIM CASEWe ask all the buyers before leaving a negative or neutral, please email us with the problem first and we will do our best to solve it for you.We care about our buyers and we only want to see them happy.WE WANT TO SEE ALL OUR BUYERS SATISFIEDALL INTERNATIONAL BUYER”ShippingShippings are via FedEx, UPS or USPS ground Shipping will start In same or two days depending on your item.Shipping rate is for USA continental ONLY and is rated to all 48 state, please do not ask for the lower shipping rate. Local pick and inspection is free and can be CASH NO TAX when you do pick up.Shipping address must match eBay profile and CAN NOT be changed ALASKA AND HAWAII BUYERS must ask for the shipping rate before purchase.

Rotel RR-1050 Remote - RSX-1067 RSX-1065 RSX-1056 RSP-1068 RSP-1098 - TESTED Preowned working condition, shows pretty considerable wear, and is missing the ir cover, see pics for detail

SOLD AS-IS FOR PARTS OR REPAIR. It may function properly but I have not fully tested it so I am selling it FOR PARTS OR REPAIR IN “AS-IS” CONDITION WITH ABSOLUTELY NO RETURNS ACCEPTED! This Rotel RDV-1050 single disc player is a great addition to your collection. With its progressive DVD audio playback, you can enjoy your favorite DVDs and DVD-Audio discs. This unit is sold as-is for parts or repair, but it comes in its original box and has the potential to work wonders with a little bit of love and attention. The brand is known for producing high-quality audio equipment, and this model is no exception. If youre a fan of Rotel products or looking for a new addition to your home theater, consider this RDV-1050.

This remote control is compatible with several Rotel models including RSX-1067, RSX-1065, RSX-1056, RSP-1068, and RSP-1098. It is in great working condition and can be yours for an affordable price. The Rotel RR-1050 remote control is a must-have accessory for any audio and video enthusiast. With this remote control, you can easily control your Rotel system without the need for multiple remotes. It is also compatible with other models, such as the USP and 9.95, making it a versatile accessory for your home entertainment system. Purchase this Rotel RR-1050 remote control today and enjoy uninterrupted control of your audio and video equipment.

Rotel RB-1050 2 Channel Power Amplifier *No Reserve + FREE Shipping*The amplifier is fully functional and is in excellent cosmetic condition. The front silver plate has a few light surface scratches..see pics. The auction will include the Rotel RB-1050 2 Channel Power Amplifier and the power cable. There are no other extra accessories included. Auction starts at $599.00 with No Reserve + FREE Shipping! STEREO AMPLIFIERRB-1092The RB-1092 is the stereo version of the RB-1091 Class D amplifier. It can generate up to 2 x 500 watts into an 8 ohm load and can drive virtually any pair of loudspeakers to very loud sound pressure levels when required.The RB-1092 is the stereo version of the RB-1091 Class D amplifier. It can generate up to 2 x 500 watts into an 8 ohm load and can drive virtually any pair of loudspeakers to very loud sound pressure levels when required. When combined with an RB-1091 and another RB-1092 for a five-channel home theater system, the sonic result is absolutely breathtaking. Terms & Conditions:We only ship within the US.You are responsible for all State taxes in your state through eBay’s policy, even if you are located outside of Florida.If the item is purchased in the state of Florida there will be a 7% sales tax added to the sale, No Exceptions.We offer a 30-day money-back guarantee on all of our items!When using PayPal, we ONLY accept United States accounts.Sorry, NO ending the auction early.NO International shipping.We DO NOT Ship to PO Boxes.Items over $200 in value and ALL apartment addresses will require signature confirmation.We ship Mon-Fri, there is no shipping on Saturday.Local pick-up is available only if stated in the auction.Please email us if you have any further questions.We appreciate your business!! Track Page Views WithAuctivas Counter

Excellent condition, fully functional. Programmable for use with Rotel or other brands as it is a learning remote as well. Post within the United States of America only.

Ideal for demanding custom installations, the ultra-stable RB-1050 combines audiophile sound quality and bullet-proof circuitry. A multi-mode amplifier, the RB-1050 develops 70 watts per channel for stereo reproduction. Individual sensitivity adjustments and auto on signal sensing circuitry allow use with a variety of distribution devices or processors. Buffered line level outputs allow multiple amplifiers to daisy chain from a single source. The toroid-based power supply and high damping factor ensure precise control of virtually all speakers. 12 volt trigger jacks and a detachable AC cord make this amplifier ideal for remote operated distributed audio systems. A front panel LED array shows clipping and protection modes for quick system analysis. Specifications Power output: 70 watts per channel into 8? (stereo) Frequency response: 10Hz to 100kHz Total harmonic distortion: 0.03% Damping factor: 500 Input sensitivity: 1V Signal to noise ratio: 116dB Speaker load impedance: 4? (minimum) Dimensions: 430 x 92 x 350mm Weight: 8.1kg ****No power cord***

Rotel DVD, CD Player Spielt auch sehr gut CDs ab, top klang Funktionalitt gegeben. Ohne FB. Verkauf s Umfang wie abgebildet. Mit einer harmonix FB funktioniert das Gert und alle Funktionen sind schaltbar. Ohne funktioniert er auch, aber z.b. nicht die Sprachauswahl der DVD. Privat Verkauf. Keine Garantie, Rcknahme. Etc. EU Versand mglich

SOLD AS-IS FOR PARTS OR REPAIR. It may function properly but I have not fully tested it so I am selling it FOR PARTS OR REPAIR IN “AS-IS” CONDITION WITH ABSOLUTELY NO RETURNS ACCEPTED! This Rotel RDV-1050 single disc player is a great addition to your collection. With its progressive DVD audio playback, you can enjoy your favorite DVDs and DVD-Audio discs. This unit is sold as-is for parts or repair, but it comes in its original box and has the potential to work wonders with a little bit of love and attention. The brand is known for producing high-quality audio equipment, and this model is no exception. If youre a fan of Rotel products or looking for a new addition to your home theater, consider this RDV-1050.

Ideal for demanding custom installations, the ultra-stable RB-1050 combines audiophile sound quality and bullet-proof circuitry. A multi-mode amplifier, the RB-1050 develops 70 watts per channel for stereo reproduction. Individual sensitivity adjustments and auto on signal sensing circuitry allow use with a variety of distribution devices or processors. Buffered line level outputs allow multiple amplifiers to daisy chain from a single source. The toroid-based power supply and high damping factor ensure precise control of virtually all speakers. 12 volt trigger jacks and a detachable AC cord make this amplifier ideal for remote operated distributed audio systems. A front panel LED array shows clipping and protection modes for quick system analysis. Specifications Power output: 70 watts per channel into 8? (stereo) Frequency response: 10Hz to 100kHz Total harmonic distortion: 0.03% Damping factor: 500 Input sensitivity: 1V Signal to noise ratio: 116dB Speaker load impedance: 4? (minimum) Dimensions: 430 x 92 x 350mm Weight: 8.1kg ****No power cord***

This Rotel Power Amplifier RB-1050 is currently not operational and is being sold for parts only. Despite its condition, this amplifier is still a highly sought-after item by audiophiles and collectors alike. The RB-1050 model is known for its high-quality sound and power output, making it a great addition to any home audio setup. The amplifier features 2 channels and is designed to work with a variety of audio sources. Despite its current state, it still retains its original aesthetic and would make a great display piece for any collector. Please note that this item is being sold as-is and no guarantees are made to its functionality.

This Rotel Power Amplifier RB-1050 is currently not operational and is being sold for parts only. Despite its condition, this amplifier is still a highly sought-after item by audiophiles and collectors alike. The RB-1050 model is known for its high-quality sound and power output, making it a great addition to any home audio setup. The amplifier features 2 channels and is designed to work with a variety of audio sources. Despite its current state, it still retains its original aesthetic and would make a great display piece for any collector. Please note that this item is being sold as-is and no guarantees are made to its functionality.

SOLD AS-IS FOR PARTS OR REPAIR. It may function properly but I have not fully tested it so I am selling it FOR PARTS OR REPAIR IN “AS-IS” CONDITION WITH ABSOLUTELY NO RETURNS ACCEPTED! This Rotel RDV-1050 single disc player is a great addition to your collection. With its progressive DVD audio playback, you can enjoy your favorite DVDs and DVD-Audio discs. This unit is sold as-is for parts or repair, but it comes in its original box and has the potential to work wonders with a little bit of love and attention. The brand is known for producing high-quality audio equipment, and this model is no exception. If youre a fan of Rotel products or looking for a new addition to your home theater, consider this RDV-1050.

Ideal for demanding custom installations, the ultra-stable RB-1050 combines audiophile sound quality and bullet-proof circuitry. A multi-mode amplifier, the RB-1050 develops 70 watts per channel for stereo reproduction. Individual sensitivity adjustments and auto on signal sensing circuitry allow use with a variety of distribution devices or processors. Buffered line level outputs allow multiple amplifiers to daisy chain from a single source. The toroid-based power supply and high damping factor ensure precise control of virtually all speakers. 12 volt trigger jacks and a detachable AC cord make this amplifier ideal for remote operated distributed audio systems. A front panel LED array shows clipping and protection modes for quick system analysis. Specifications Power output: 70 watts per channel into 8? (stereo) Frequency response: 10Hz to 100kHz Total harmonic distortion: 0.03% Damping factor: 500 Input sensitivity: 1V Signal to noise ratio: 116dB Speaker load impedance: 4? (minimum) Dimensions: 430 x 92 x 350mm Weight: 8.1kg ****No power cord***

This Rotel Power Amplifier RB-1050 is currently not operational and is being sold for parts only. Despite its condition, this amplifier is still a highly sought-after item by audiophiles and collectors alike. The RB-1050 model is known for its high-quality sound and power output, making it a great addition to any home audio setup. The amplifier features 2 channels and is designed to work with a variety of audio sources. Despite its current state, it still retains its original aesthetic and would make a great display piece for any collector. Please note that this item is being sold as-is and no guarantees are made to its functionality.

Remote Control For Rotel RR-1050 Misiing Cover Tested Works ????. Condition is Used. Shipped with USPS Ground Advantage.

Rotel RX1050 Stereo Receiver . Condition is Used. Shipped with USPS Ground Advantage.

Rotel am/fm StereoReceiver RX-1050. It’s in excellent shape and in good working condition.

Unit tested and functioning well. Has a few scratches but no visible dents or damage otherwise. Zoom on pics for details. Ideal for demanding custom installations, the ultra-stable RB-1050 combines audiophile sound quality and bullet-proof circuitry. A multi-mode amplifier, the RB-1050 develops 70 watts per channel for stereo reproduction. Individual sensitivity adjustments and auto on signal sensing circuitry allow use with a variety of distribution devices or processors. Buffered line level outputs allow multiple amplifiers to daisy chain from a single source. The toroid-based power supply and high damping factor ensure precise control of virtually all speakers. 12 volt trigger jacks and a detachable AC cord make this amplifier ideal for remote operated distributed audio systems. A front panel LED array shows clipping and protection modes for quick system analysis.

Ideal for demanding custom installations, the ultra-stable RB-1050 combines audiophile sound quality and bullet-proof circuitry. A multi-mode amplifier, the RB-1050 develops 70 watts per channel for stereo reproduction. Individual sensitivity adjustments and auto on signal sensing circuitry allow use with a variety of distribution devices or processors. Buffered line level outputs allow multiple amplifiers to daisy chain from a single source. The toroid-based power supply and high damping factor ensure precise control of virtually all speakers. 12 volt trigger jacks and a detachable AC cord make this amplifier ideal for remote operated distributed audio systems. A front panel LED array shows clipping and protection modes for quick system analysis. Specifications Power output: 70 watts per channel into 8? (stereo) Frequency response: 10Hz to 100kHz Total harmonic distortion: 0.03% Damping factor: 500 Input sensitivity: 1V Signal to noise ratio: 116dB Speaker load impedance: 4? (minimum) Dimensions: 430 x 92 x 350mm Weight: 8.1kg ****No power cord***

For sale is a pre-owned Rotel RB-1050 amp. This amp works great and is in “like new” condition. I bought a new receiver and no longer need it. It’s too nice to let collect dust on a shelf. Comes with the power cord. - Ideal for demanding custom installations, the ultra-stable RB-1050 combines audiophile sound quality and bullet-proof circuitry. A multi-mode amplifier, the RB-1050 develops 70 watts per channel for stereo reproduction. Individual sensitivity adjustments and auto on signal sensing circuitry allow use with a variety of distribution devices or processors. Buffered line level outputs allow multiple amplifiers to daisy chain from a single source. The toroid-based power supply and high damping factor ensure precise control of virtually all speakers. 12 volt trigger jacks and a detachable AC cord make this amplifier ideal for remote operated distributed audio systems. A front panel LED array shows clipping and protection modes for quick system analysis.

You are looking at a really nice amplifier/receiver made by ROTEL model RX-1050 Works great and sounds awesome!!!!!! Thanks for looking.