Preowned condition tested to work.

Offered for your consideration is a vintage PIONEER #25-737A-1 10 inch woofer removed from my HPM-40 speakers, manufactured in Japan. This cast basket mid/bass driver with carbon-fiber blend cone was also used in the HPM-60. It bears what appears to be a 1979 build code on the basket’s rear. So, please have a look at my large photos and read the remaining description to decide if this capable PIONEER woofer should be yours. *Although the listing is written largely in singular to avoid any confusion, two (2) PIONEER #25-737A-1 10” woofers are available at time of this writing. Please choose if you’d like to buy one or both in the quantity field at the top of the listing. The shipping cost will be automatically calculated by eBay checkout. This PIONEER woofer is in relatively clean, very good condition. The sturdy ribbed, carbon-fiber impregnated paper cone is structurally flawless with perfect voice coil cap, but it exhibits some staining as pictured (the first of the two woofers to sell, not pictured, has a cone that is less stained). Plus, the surround is permanent “accordion-style” textile material, instead of the fragile foam used on the early version of this driver, and is urethane-coated for added durability. Also, the sizeable cast aluminum-alloy basket is perfect and there are no chips or oxidation on the large magnet structure. And, the +/- terminals are marked for polarity (red dot = +), measure the standard .205”, and have never been soldered on the spades. Overall, this is a well-preserved vintage woofer. Most importantly, it was tested recently and sounds great with clear, fast midrange and ample low-end. It’s rated down to 35Hz and carries to 4kHz in the HPM-40, so it’s a stout wide-range driver. Plus, I tested its DC resistance at 5.9?, consistent with an 8 ohm nominal rating of the past (it would be considered 6 ohm today). Lastly, the basket measures 10?” across, 11½” at the rounded corners, stands just a bit over 4” tall, and the mounting holes are spaced 7?” adjacent / 10?” diagonal, c-t-c. So, if you have a blown or damaged 10” woofer in your 1977-80 HPM-40, HPM-60, or other suitable model, you’ve found the right listing! Your speaker will be soundest its finest again in no time. Discontinued long ago, and become scarcer every year, it’d also make a smart “rainy-day” spare to have around just in case. As pictured and described, this PIONEER #25-737A-1 10” woofer is offered at a competitive price. Terms of Sale: I encourage interested parties to ask any questions they may have about this listing before committing to purchase. Payment is due at checkout by PayPal or other accepted methods. U.S. mailing addresses will pay $18.95 for very carefully packed shipping via U.S. Postal Service, FedEx, or UPS with tracking and delivery confirmation. International purchases accepted only from those who are able to pay with PayPal including shipping by U.S Postal Service First Class Parcel Air Mail. Thanks for looking! *the speaker label photo is presented only for donor model reference

Hello, I have for sale my Pair of Pioneer HPM-40 CrossoversThese are in working condition. Removed from working speakersThese are in As Pictured physical condition.These will be packed with carewith protection on all sides top and bottom!The shipping is for the lower 48 states only.If you have any questions please feel free to ask, thank you!

1- Pioneer HPM-40 Speaker Super Tweeter HP-015A Supertweeter. Listing is for 1 speaker removed from Pioneer HPM-40 speaker with cosmetic damage to wood box. Tested to work before removal. You will receive the exact part pictured. May fit or was original to other models In very good working condition. Missing outer face cover. Fast safe shipping

Offered for your consideration is one (1) vintage PIONEER #HP-015A-4 High Polymer super tweeter removed from my HPM-40 speakers, manufactured in Japan. This ultra-high frequency driver was also used in Pioneer’s HPM-60 and HPM-100 models. It shows a 1979 build code on the orange product sticker and differs from the later B-variant of this driver only in faceplate thickness and the +/- terminal positioning. I have no doubt they are interchangeable since I’ve found an A-suffix and a B-suffix super tweeter in a pair of HPM-40 speakers several times. So, please take a look at my large photos and read the remaining description to decide if this indispensable PIONEER upper frequency driver is correct for your needs. This PIONEER super tweeter is in clean, excellent condition. The polymer film is flawlessly smooth underneath the perfect condition protective metal screen. Plus, the faceplate is also perfect with no cracks, scratches, or marks. Lastly, the +/- terminals are marked for polarity and have never been soldered on the spades. Overall, it’s exceptionally well-preserved. The PIONEER HPM speakers used this super tweeter to top-off the driver ensemble and it covers all the way to an impressive 25kHz. I tested it recently and it worked perfectly—clear and very crisp—but the output is very faint by design as with all of these super tweeter units I’ve handled over the years. It carries upwards from 10kHz as crossed-over in the HPM-40; 12kHz in the 60 and 100. Plus, since it lacks a magnet or moving parts no DC resistance reading can be made. Lastly, the faceplate measures 3 3/16” x 2 ?16”, it projects about ?” from the cabinet (incl. the hemispherical radiating surface) and the mount holes are spaced 2 13/16” long way / 1?” short way apart, c-t-c. So, if your HPM-40, 60, or 100 speakers have a blown or damaged super tweeter, you’ve found the right listing—your speaker will be sounding and looking its best again in no time! These were discontinued decades ago, and available examples are becoming scarcer every year, so it’d also make a smart spare to have around just in case. As pictured and described, this superb PIONEER #HP-015A-4 super tweeter is offered at a competitive price. Terms of Sale: I encourage interested parties to ask any questions they may have about this listing before committing to purchase. Payment is due at checkout by PayPal or other accepted methods. U.S. mailing addresses will pay $6.95 for very carefully packed shipping via U.S. Postal Service, FedEx, or UPS with tracking and delivery confirmation. International purchases accepted only from those who are able to pay with PayPal including shipping by U.S Postal Service First Class Parcel Air Mail. Thanks for looking! *the speaker label photo is presented only for donor model reference

Pair (2) 1977 PIONEER HPM 40 Speaker Grill Covers ~ Complete Grilles ~ Excellent. Here's a pair of grille covers harvested from a set of Pioneer HP-40 speakers. These are in good vintage condition but not perfect. Please see pictures for detail of actual condition. Both covers have wear from age use and storage. Frayed ends and some small nicks and pokes. One cover looks like it has a spill mark near the top but it is not as visible on the speaker face away from white background and photo lights. Covers come with badges and all corner mounting pegs. There is one tiny tiny hole that is shown in photo.

sehr seltene und technisch gute Pioneer HPM-40 Lautsprecher Boxen voll funktionsfähig, mit optischen Mängeln der Versand erfolgt auf Grund von Gewicht und Größe in zwei gesonderten Paketen, Abholung möglich shipping worldwide Zustand und Lieferumfang siehe Bilder. Privatverkauf, deshalb keine Garantie oder Gewährleistung. AllgemeinHersteller: PioneerModell: HPM-40Typ: LautsprecherBaujahre: 1976 - 1979Hergestellt in: JapanFarbe: Holz, NussbaumAbmessungen: 325 x 570 x 317 mm (BxHxT)Gewicht: 13 kgNeupreis ca.: 698 DM Technische DatenBauart: 3-Wege, BassreflexChassis:Bass: 250 mm Karbonfiber-MembranMittel-Hochtöner1x 45 mm KonusSuper Hochtöner: High Polymer Molekular FilmBelastbarkeit (Nenn-/Musikb.): 20 W / 40 WWirkungsgrad: 91 dB / W / mFrequenzgang: 35 Hz - 25 kHzÜbergangsbereiche: 4000 Hz, 10000 HzImpedanz: 8 Ohm Besondere AusstattungenHigh Polymer Mylar Super Hochtöner

Offered for your consideration is one (1) vintage PIONEER #HP-015B High Polymer super tweeter removed from my HPM-40 speakers, manufactured in Japan. This ultra-high frequency driver was also used in Pioneer’s HPM-60 and HPM-100 models. It shows a 1980 build code on the orange product sticker and differs from the earlier A-variant of this driver only in faceplate thickness and the +/- terminal positioning. I have no doubt they are interchangeable since I’ve found an A-suffix and a B-suffix super tweeter in a pair of HPM-40 speakers several times. So, please take a look at my large photos and read the remaining description to decide if this splendid PIONEER upper frequency driver is correct for your needs. This PIONEER super tweeter is in clean, excellent condition. The polymer film is flawlessly smooth underneath the perfect condition protective metal screen. Plus, the faceplate is also perfect with no cracks, scratches, or marks. Lastly, the +/- terminals are marked for polarity and have never been soldered on the spades. Overall, it’s exceptionally well-preserved. The PIONEER HPM speakers used this super tweeter to top-off the driver ensemble and it covers all the way to an impressive 25kHz. I tested it recently and it worked perfectly—clear and very crisp—but the output is very faint by design as with all of these super tweeter units I’ve handled over the years. It carries upwards from 10kHz as crossed-over in the HPM-40; 12kHz in the 60 and 100. Plus, since it lacks a magnet or moving parts no DC resistance reading can be made. Lastly, the faceplate measures 3 3/16” x 2 ?16”, it projects about ¾” from the cabinet (incl. the hemispherical radiating surface) and the mount holes are spaced 2 13/16” long way / 1?” short way apart, c-t-c. So, if your HPM-40, 60, or 100 speakers have a blown or damaged super tweeter, you’ve found the right listing—your speaker will be sounding and looking its best again in no time! These were discontinued decades ago, and available examples are becoming scarcer every year, so it’d also make a smart spare to have around just in case. As pictured and described, this remarkable PIONEER #HP-015B super tweeter is offered at a competitive price. Terms of Sale: I encourage interested parties to ask any questions they may have about this listing before committing to purchase. Payment is due at checkout by PayPal or other accepted methods. U.S. mailing addresses will pay $6.95 for very carefully packed shipping via U.S. Postal Service, FedEx, or UPS with tracking and delivery confirmation. International purchases accepted only from those who are able to pay with PayPal including shipping by U.S Postal Service First Class Parcel Air Mail. Thanks for looking! *the speaker label photo is presented only for donor model reference

Offered for your consideration is one (1) vintage PIONEER #HP-015B High Polymer super tweeter removed from my HPM-40 speakers, manufactured in Japan. This ultra-high frequency driver was also used in Pioneer’s HPM-60 and HPM-100 models. It shows a 1980 build code on the orange product sticker and differs from the earlier A-variant of this driver only in faceplate thickness and the +/- terminal positioning. I have no doubt they are interchangeable since I’ve found an A-suffix and a B-suffix super tweeter in a pair of HPM-40 speakers several times. So, please take a look at my large photos and read the remaining description to decide if this splendid PIONEER upper frequency driver is correct for your needs. This PIONEER super tweeter is in clean, excellent condition. The polymer film is flawlessly smooth underneath the perfect condition protective metal screen. Plus, the faceplate is also perfect with no cracks, scratches, or marks. Lastly, the +/- terminals are marked for polarity and have never been soldered on the spades. Overall, it’s exceptionally well-preserved. The PIONEER HPM speakers used this super tweeter to top-off the driver ensemble and it covers all the way to an impressive 25kHz. I tested it recently and it worked perfectly—clear and very crisp—but the output is very faint by design as with all of these super tweeter units I’ve handled over the years. It carries upwards from 10kHz as crossed-over in the HPM-40; 12kHz in the 60 and 100. Plus, since it lacks a magnet or moving parts no DC resistance reading can be made. Lastly, the faceplate measures 3 3/16” x 2 ?16”, it projects about ¾” from the cabinet (incl. the hemispherical radiating surface) and the mount holes are spaced 2 13/16” long way / 1?” short way apart, c-t-c. So, if your HPM-40, 60, or 100 speakers have a blown or damaged super tweeter, you’ve found the right listing—your speaker will be sounding and looking its best again in no time! These were discontinued decades ago, and available examples are becoming scarcer every year, so it’d also make a smart spare to have around just in case. As pictured and described, this remarkable PIONEER #HP-015B super tweeter is offered at a competitive price. Terms of Sale: I encourage interested parties to ask any questions they may have about this listing before committing to purchase. Payment is due at checkout by PayPal or other accepted methods. U.S. mailing addresses will pay $6.95 for very carefully packed shipping via U.S. Postal Service, FedEx, or UPS with tracking and delivery confirmation. International purchases accepted only from those who are able to pay with PayPal including shipping by U.S Postal Service First Class Parcel Air Mail. Thanks for looking! *the speaker label photo is presented only for donor model reference

2 filtres passifs denceintes PIONEER HPM 40 fonctionnels en état dorigine les photos font partie de la description et sont celles des pieces en venteVente dans letat decrit sans garantie ni retour Envoi en France / Belgique/ Luxembourg en point relais Mondial Relay : 8 eurosDelivery at home Mondial relay to Germany/Netherlands/Spain/Austria /Italy/Portugal 15 eurosDelivery to other CEE countries : Colissimo international 18 euros

Offered for your consideration is one (1) vintage PIONEER grille emblem removed from my HPM-40 speakers, manufactured in Japan c.1980. Please have a look at my large photos and read the remaining description taken to decide if this useful PIONEER emblem should be yours. This PIONEER HPM-500 emblem is in clean, excellent condition. It’s constructed of aluminum alloy with black-enameled background and measures 2¼” wide x ½” tall. There are no dings, scratches, or finish wear. It presents exceptionally well at all viewing distances. So, as pictured and described, this splendid PIONEER HPM-40 speaker grille emblem is offered at a competitive price. Terms of Sale: I encourage interested parties to ask any questions they may have about this listing before committing to purchase. Payment is due at checkout by PayPal or other accepted methods. U.S. mailing addresses will pay $3.95 for very carefully packed shipping via U.S. Postal Service with tracking and delivery confirmation. International purchases accepted only from those who are able to pay with PayPal, including shipping by U.S. Postal Service First Class Parcel Air Mail. Thanks for looking! *the speaker label photo is presented only for donor model reference

Pioneer HPM 40 HiFi 3-Way Bass Reflex Speakers Restored Boxed Sound Amazing. Fully gone through. New bass driver foams. Amazing condition for age. One speaker almost immaculate, the other a few marks on the veneer. See pics Original Box In two minds to keep or sell tbh Collection only

Single OEM Vintage Pioneer HPM-40 Tweeter Driver Speaker 45-710A. Fully working, nice condition. Dust cap pushed in

Pioneer HPM-40 Speaker Super Tweeter Part HP-015A-1 HP-015A Supertweeter. Listing is for 1 speaker removed from Pioneer HPM-40 speaker with cosmetic damage to wood box. Tested to work before removal. You will receive the exact part pictured. May fit or was original to other models In very good working and visible condition. Fast safe shipping

sehr seltene und technisch gute Pioneer HPM-40 Lautsprecher Boxen voll funktionsfähig, mit optischen Mängeln der Versand erfolgt auf Grund von Gewicht und Größe in zwei gesonderten Paketen, Abholung möglich shipping worldwide Zustand und Lieferumfang siehe Bilder. Privatverkauf, deshalb keine Garantie oder Gewährleistung. AllgemeinHersteller: PioneerModell: HPM-40Typ: LautsprecherBaujahre: 1976 - 1979Hergestellt in: JapanFarbe: Holz, NussbaumAbmessungen: 325 x 570 x 317 mm (BxHxT)Gewicht: 13 kgNeupreis ca.: 698 DM Technische DatenBauart: 3-Wege, BassreflexChassis:Bass: 250 mm Karbonfiber-MembranMittel-Hochtöner1x 45 mm KonusSuper Hochtöner: High Polymer Molekular FilmBelastbarkeit (Nenn-/Musikb.): 20 W / 40 WWirkungsgrad: 91 dB / W / mFrequenzgang: 35 Hz - 25 kHzÜbergangsbereiche: 4000 Hz, 10000 HzImpedanz: 8 Ohm Besondere AusstattungenHigh Polymer Mylar Super Hochtöner

Versand nur nach Deutschland und ins EU-Ausland mglich. Verkaufe Frequenzweichen (Paare) von Pioneer, Heco und Canton. Alle FW wurden mit dem Sinusgenerator und SignalTraicer getestet und funktionieren. Paket 1: Pioneer HPM 40 Paket 2: Heco NW-4018, 3-Wege. 8 Ohm Paket 3: Canton ????, Achtung: Sie bieten auf ein Paket Ihrer Wahl. Bei Sofortkauf (25) erhalten Sie alle drei Pakete. Garantiere fr sichere und ordnungsgeme Verpackung. Versand nur nach Deutschland und ins EU-Ausland mglich. _______________________________________________________________ Keine Garantie Keine Artikel-Rcknahme Versandrisiko bernimmt der Kufer

Offered for your consideration is a vintage PIONEER #45-711B-1 1¾ inch cone tweeter removed from my HPM-40 speakers, manufactured in Japan. This outstanding high frequency driver was also used in the PIONEER HPM-60 and HPM-100 models. It has what appears to be a 1979 build code on the magnet cover and differs from the later “C”-variant of this driver only in magnet shape (thicker, but not as wide, and two ounces heavier overall) so I image they’re interchangeable. So, please have a look at my large photos and read the remaining description to decide if this superb PIONEER tweeter is correct for your needs. *Although the listing is written largely in singular to avoid any confusion, two (2) PIONEER #45-711B-1 tweeters are available at time of this writing. Please choose if you’d like to buy one or both in the quantity field at the top of the listing. The shipping cost will be automatically calculated by eBay checkout. This PIONEER tweeter is in clean, excellent condition. The lightweight paper cone, center cap, and suspension edging are all perfect and the lead-in wires are also unharmed. Plus, the cast aluminum-alloy frame is in great shape with no dings or scratches, just a tiny mark or two as pictured. And, the +/- terminals are marked for polarity, measure the industry standard .205”, and have never been soldered on the spades. Overall, this tweeter looks practically new! Most importantly, I tested it recently and the sound is wonderful—strong output with well-pronounced upper midrange and clear highs. Plus, I tested its DC resistance at 5.9?, consistent with an 8 ohm nominal driver rating of the past (6 ohm ratings were not in widespread use when it was made). Lastly, the faceplate measures 4¾” diameter, it stands about 1?” tall, and the mounting holes are spaced 2?” adjacent / 4 1/16” diagonal apart, c-t-c. So, if you have a blown or damaged 1¾” cone tweeter in your 1976-80 HPM-40, HPM-60, or HPM-100 speakers, you’ve found the right listing! Your speaker will be sounding its best again in no time! Discontinued long ago, and become scarcer (and more costly) every year, it’d also make a prudent spare to have around just in case. As pictured and described, this splendid PIONEER #45-711B-1 tweeter is offered at a competitive price. Terms of Sale: I encourage interested parties to ask any questions they may have about this listing before committing to purchase. Payment is due at checkout by PayPal or other accepted methods. U.S. mailing addresses will pay $10.95 for very carefully packed shipping via U.S. Postal Service, FedEx, or UPS with tracking and delivery confirmation. International purchases accepted only from those who are able to pay with PayPal including shipping by U.S Postal Service First Class Parcel Air Mail. Thanks for looking! *The tweeter will be packaged with cardboard over the faceplate and cone, raised with spacers so the input wires are not being touched, and secured with wire ties at four mounting holes. Then itll be wrapped with bubble sheets and placed in a sturdy box with additional protective materials. This will ensure the cone, wires, and terminals are fully protected and that there are no disappointments! *the speaker label photo is presented only for donor model reference

DIFFUSORI PIONEER HPM40 OTTIME CONDIZIONI E PERFETTAMENTE FUNZIONANTI ( testate e woofer ribordati da tecnico specializzato e con materiale di qualit ) MANCA SOLO UN TERMINALE (come da foto) SOLO ALCUNE IMPERFEZIONI SOTTO ALLE BASI , FACILMENTE RESTAURABILI per le dimensioni e peso saranno spedite con 2 imballi separat

PIONEER HPM 100/60/40 MIDRANGE (200 WATT VERSION 10-721B) WORKING COND.see pics, looks like its been repaired.it is in working condition fast ship!

Verkaufe Frequenzweichen (Paare) von Pioneer, Heco und Canton. Alle FW wurden mit dem Sinusgenerator und SignalTraicer getestet und funktionieren. Paket 1: Pioneer HPM 40 Paket 2: Heco NW-4018, 3-Wege. 8 Ohm Paket 3: Canton ????, Achtung: Sie bieten auf ein Paket Ihrer Wahl. Bei Sofortkauf (25€) erhalten Sie alle drei Pakete. Garantiere für sichere und ordnungsgemäße Verpackung. Versand ins Ausland ist möglich (bitte vor dem Bieten nach den Versandskosten fragen). Nur EU außer Schweiz. _______________________________________________________________ Keine Garantie Keine Artikel-Rücknahme Versandrisiko übernimmt der Käufer

sehr seltene und technisch gute Pioneer HPM-40 Lautsprecher Boxen voll funktionsfähig, mit optischen Mängeln der Versand erfolgt auf Grund von Gewicht und Größe in zwei gesonderten Paketen, Abholung möglich shipping worldwide Zustand und Lieferumfang siehe Bilder. Privatverkauf, deshalb keine Garantie oder Gewährleistung. AllgemeinHersteller: PioneerModell: HPM-40Typ: LautsprecherBaujahre: 1976 - 1979Hergestellt in: JapanFarbe: Holz, NussbaumAbmessungen: 325 x 570 x 317 mm (BxHxT)Gewicht: 13 kgNeupreis ca.: 698 DM Technische DatenBauart: 3-Wege, BassreflexChassis:Bass: 250 mm Karbonfiber-MembranMittel-Hochtöner1x 45 mm KonusSuper Hochtöner: High Polymer Molekular FilmBelastbarkeit (Nenn-/Musikb.): 20 W / 40 WWirkungsgrad: 91 dB / W / mFrequenzgang: 35 Hz - 25 kHzÜbergangsbereiche: 4000 Hz, 10000 HzImpedanz: 8 Ohm Besondere AusstattungenHigh Polymer Mylar Super Hochtöner

Fully working, nice condition. Dust cap pushed in. please see photos for condition, !! thank you !!!

sehr seltene und technisch gute Pioneer HPM-40 Lautsprecher Boxen voll funktionsfähig, mit optischen Mängeln der Versand erfolgt auf Grund von Gewicht und Größe in zwei gesonderten Paketen, Abholung möglich shipping worldwide Zustand und Lieferumfang siehe Bilder. Privatverkauf, deshalb keine Garantie oder Gewährleistung. AllgemeinHersteller: PioneerModell: HPM-40Typ: LautsprecherBaujahre: 1976 - 1979Hergestellt in: JapanFarbe: Holz, NussbaumAbmessungen: 325 x 570 x 317 mm (BxHxT)Gewicht: 13 kgNeupreis ca.: 698 DM Technische DatenBauart: 3-Wege, BassreflexChassis:Bass: 250 mm Karbonfiber-MembranMittel-Hochtöner1x 45 mm KonusSuper Hochtöner: High Polymer Molekular FilmBelastbarkeit (Nenn-/Musikb.): 20 W / 40 WWirkungsgrad: 91 dB / W / mFrequenzgang: 35 Hz - 25 kHzÜbergangsbereiche: 4000 Hz, 10000 HzImpedanz: 8 Ohm Besondere AusstattungenHigh Polymer Mylar Super Hochtöner

Pioneer Speaker HPM-40 Operating Guide And Vintage Advertisement, VGC.