Kept in a smoke and pet-free environment since purchase, never had any issues, very versatile with RCA & Balanced inputs, also bridgeable Used to drive 4-ohm loads with no problem. Original double box and packing for first one sold. Have three in similar condition selling one at a time. Continuous power output:125 watts RMS x 2, 20 Hz - 20 kHz, 8 ?, both channels driven225 watts RMS x 2, 20 Hz - 20 kHz, 4 ?, both channels driven400 watts RMS x 1, 20 Hz - 20 kHz, 8 ? Power bandwidth:5 Hz - 100 kHz, +0/-3 dB at 1 watt Total harmonic distortion:< 0.06 % at full power IM distortion: balanced 16 V rms< 0.04 % Slew rate:> 130 V/µsecond Dynamic headroom:> 1.5 dB Interchannel crosstalk:> 80 dB at 1 kHz;> 63 dB at 20 kHz Input sensitivity:1 V for 28.28 V, THX Reference Level Input impedance:33 k ? S/N ratio:112 dB, input shorted, IHF A-weighted Damping factor:> 800 at 20 Hz Dimensions:17-1/4 w x 4-1/8 h x 13-1/4 d, 3-5/8 h without feet Net weight: 28 lb.

Parasound halo P3 preamplifier with phono input. Condition is Used. Shipped with UPS Ground.

PREOWNED - $3200 LIST! - FULLY TESTED - INCLUDES ORIGINAL REMOTE, POWER CABLE - *COAX-IN IS NOT WORKING*Preamp and DAC Features Latest generation ESS Sabre32 Reference DAC (ES9018K2M) Asynchronous USB 2.0 supports PCM up to 384kHz/32-bit USB input decodes Native DSD64, DSD128, DSD256 and DoP DSD Windows USB drivers for ASIO & WASAPI Mac OS does not require any drivers optical accept PCM up to 192kHz/24-bit Analog bass management with high & low pass crossovers Home theater bypass input for surround sound integration Front panel subwoofer level control Dedicated high current headphone amplifier (TI TPA6120) Phono for MM & MC with 100 ? or 47k ? load Front panel Aux input with automatic +12 dB gain stage 5 pairs RCA line level Analog inputs 1 pair XLR balanced Analog input Balanced XLR and RCA left and right preamp outputs 1 balanced XLR and 2 RCA subwoofer outputs Bass & treble controls with relay bypass from remote or front panel Rear panel IR input and IR loop output jacks 12 Volt input and output to triggers Back-lit remote control with discrete buttons 0.5w standby power consumption meets Energy Star & EU specs Power Amp Features 160 Watts x 2 @ 8 Ohms (RMS, both channels driven) 240 Watts x 2 @ 4 Ohms (RMS, both channels driven) Power amp circuit topology designed by legendary John Curl Direct amplifier input to bypass preamp section High bias class A/AB operation Oversized shielded toroid power transformer Dual-mono power supply and power amplifier 40,000uF power supply filter capacitance Matched JFET input stages and MOSFET driver stages 12 high voltage/high current bipolar output transistors Heavy-duty 24k gold-plated 5-way speaker binding posts Over temp and short circuit relay protection Power Output - Both channels driven(0.05% THD, RMS, 20 Hz - 20 kHz)160 watts x 2 @ 8 ?240 watts x 2 @ 4 ? Power Output - Both channels driven(0.9% THD, RMS, 20 Hz - 20 kHz)180 watts x 2 @ 8 ?270 watts x 2 @ 4 ? Current Capacity45 amps peak per channel Frequency Response10 Hz - 100 kHz, +0/-3 dB Total Harmonic Distortion (THD)< 0.01 %, average listening levels< 0.05 %, 160 watts x 2 @ 8 ? Interchannel Crosstalk> 50 dB at 20 kHz> 70 dB at 1 kHz Signal to Noise Ratio - IHF A-weightedLine in: - 103 dB (input shorted)Digital in: - 106 dB Amplifier Damping Factor> 800 at 20 Hz Preamp Stage Input Sensitivity300 mV in for 1 V at Pre Out jacksTotal Preamp Stage Gain: 10 dBMax Output Unbalanced: 7 VMax Output Balanced: 9 V Power Amplifier Stage Sensitivity1 V at Bypass/Amp In for 28 V at Speaker OutTotal Amp Stage Gain: 28 dB Phono Stage Sensitivity / Input Impedance Input ImpedanceMM: 35 dB / 47 k ?MC: 52 dB / 47 k ? or 100 ? Input Capacitance150 pF High & Low Pass Crossover Slopes12 dB per octave Supported DAC Sampling Rates USB: up to 384 kHz / 32-bit PCMDSD Native: DSD 64, DSD 128, DSD 256DSD over PCM (DoP) at 384 kHz Opt: up to 192 kHz / 24-bit PCM Digital to Analog ConverterESS Sabre32 Reference ES9018K2M384 kHz / 32-bit USB 2.0 ControllerVIA VT1731, 384 kHz / 32-bit Headphone AmplifierTexas Instruments TPA6120AOutput Impedance 10 ohms XLR Pin Identification1 = Ground (Shield)2 = Positive3 = Negative (Return) Input ImpedanceUnbalanced: 24 k ?Balanced: 100 k ? per leg Output ImpedanceUnbalanced: 100 ?Balanced: 470 ? per leg DimensionsWidth: 17-1/4 (437 mm)Depth: 16-1/4 (413 mm)Depth, with cables 17-1/4 (437 mm)Height, with feet: 5-7/8 (150 mm)Height, without feet: 5-1/4 (133 mm), 3U Net Weight33 lb. (15 kg) Shipping Weight 45 lb. (20.4 kg) Hi-Fi Heaven1549 Sixth StGreen Bay, WI 54304Contact us with your exact shipping address for accurate shipping cost.Larger speakers and items over 150lbs are strapped to a pallet and shipped via Freight including liftgate and residential delivery.We accept Pay-Pal or credit cards by contacting our store.We offer a 4% discount with payment by Zelle or check.Defective items are exchanged within 14 days from delivery.After 14 days, the manufacturers warranty will apply. Contact us for any assistance in obtaining warranty assistance.Defective item returns must be in the manufacturers original packaging, in like-new condition, including all packaging materials, shipped as-received and fully insured.Items are guaranteed to be as described.If a refund is desired, we will refund your full purchase price minus a 20% restocking fee.The item must be as received & unopened. Buyer pays return shipping costs.If you are having a problem, Please call before making a return claim on eBay.We do not offer free auditions or trials of merchandise.Returns will only be accepted for items that are truly defective.We use methods to detect product tampering.We will seek legal action against any individual or entity attempting to defraud us.Hi-Fi Heaven1549 Sixth StGreen Bay, WI 54304

6 line inputs, one input switchable to MM phono Relay switched direct inputs: balanced and unbalanced External processor send and receive loop Balanced XLR and unbalanced RCA outputs Vacuum fluorescent status display Defeatable bass and treble controls Enormous encapsulated toroid power transformer Dual layer glass epoxy circuit boards High resolution stereo headphone circuit RS-232 control port External IR input and loop output jacks Two 12v triggers; 1 input and 1 loop output Gold-plated RCA jacks No remote control Frequency Response: 5 Hz - 55 kHz, +0/-1 dB, full output Total harmonic distortion: < 0.01% 1 kHz; < 0.03% 20 kHz IM distortion: balanced 16 V rms < 0.03 % Maximum Output : > 8 V before clipping Input Impedance : > line input 30 kW; phono 47 kW Output Impedance : 60 ? Input Sensitivity: line inputs 150 mV, +/- 5%; phono 2 mV Maximum Input level: 10.5 V before clipping S/N ratio: line input >92 dB, A-weighted, ref 1 V output line input >84 dB, unweighted, ref 1 V output Cross-talk: > 55 dB, 20 kHz Channel level matching: < 0.1 dB Voltage: Switchable for 110V - 120V or 220V ? 240V operation Dimensions: 17-1/4 w x 4-1/8 h x 13-3/4 d, 3-5/8 h without feet Net weight: 16 lb. Fill free to ask any questions.

Kept in a smoke and pet-free environment since purchase, never had any issues, very versatile with RCA & Balanced inputs, also bridgeable Used to drive 4-ohm loads with no problem. Original double box and packing for first one sold. Have three in similar condition selling one at a time. Continuous power output:125 watts RMS x 2, 20 Hz - 20 kHz, 8 ?, both channels driven225 watts RMS x 2, 20 Hz - 20 kHz, 4 ?, both channels driven400 watts RMS x 1, 20 Hz - 20 kHz, 8 ? Power bandwidth:5 Hz - 100 kHz, +0/-3 dB at 1 watt Total harmonic distortion:< 0.06 % at full power IM distortion: balanced 16 V rms< 0.04 % Slew rate:> 130 V/µsecond Dynamic headroom:> 1.5 dB Interchannel crosstalk:> 80 dB at 1 kHz;> 63 dB at 20 kHz Input sensitivity:1 V for 28.28 V, THX Reference Level Input impedance:33 k ? S/N ratio:112 dB, input shorted, IHF A-weighted Damping factor:> 800 at 20 Hz Dimensions:17-1/4 w x 4-1/8 h x 13-1/4 d, 3-5/8 h without feet Net weight: 28 lb.

Kept in a smoke and pet-free environment since purchase, never had any issues, very versatile with RCA & Balanced inputs, also bridgeable Used to drive 4-ohm loads with no problem. Original double box and packing for first one sold. Have three in similar condition selling one at a time. Continuous power output:125 watts RMS x 2, 20 Hz - 20 kHz, 8 ?, both channels driven225 watts RMS x 2, 20 Hz - 20 kHz, 4 ?, both channels driven400 watts RMS x 1, 20 Hz - 20 kHz, 8 ? Power bandwidth:5 Hz - 100 kHz, +0/-3 dB at 1 watt Total harmonic distortion:< 0.06 % at full power IM distortion: balanced 16 V rms< 0.04 % Slew rate:> 130 V/µsecond Dynamic headroom:> 1.5 dB Interchannel crosstalk:> 80 dB at 1 kHz;> 63 dB at 20 kHz Input sensitivity:1 V for 28.28 V, THX Reference Level Input impedance:33 k ? S/N ratio:112 dB, input shorted, IHF A-weighted Damping factor:> 800 at 20 Hz Dimensions:17-1/4 w x 4-1/8 h x 13-1/4 d, 3-5/8 h without feet Net weight: 28 lb.

6 line inputs, one input switchable to MM phono Relay switched direct inputs: balanced and unbalanced External processor send and receive loop Balanced XLR and unbalanced RCA outputs Vacuum fluorescent status display Defeatable bass and treble controls Enormous encapsulated toroid power transformer Dual layer glass epoxy circuit boards High resolution stereo headphone circuit RS-232 control port External IR input and loop output jacks Two 12v triggers; 1 input and 1 loop output Gold-plated RCA jacks No remote control Frequency Response: 5 Hz - 55 kHz, +0/-1 dB, full output Total harmonic distortion: < 0.01% 1 kHz; < 0.03% 20 kHz IM distortion: balanced 16 V rms < 0.03 % Maximum Output : > 8 V before clipping Input Impedance : > line input 30 kW; phono 47 kW Output Impedance : 60 ? Input Sensitivity: line inputs 150 mV, +/- 5%; phono 2 mV Maximum Input level: 10.5 V before clipping S/N ratio: line input >92 dB, A-weighted, ref 1 V output line input >84 dB, unweighted, ref 1 V output Cross-talk: > 55 dB, 20 kHz Channel level matching: < 0.1 dB Voltage: Switchable for 110V - 120V or 220V ? 240V operation Dimensions: 17-1/4 w x 4-1/8 h x 13-3/4 d, 3-5/8 h without feet Net weight: 16 lb. Fill free to ask any questions.

6 line inputs, one input switchable to MM phono Relay switched direct inputs: balanced and unbalanced External processor send and receive loop Balanced XLR and unbalanced RCA outputs Vacuum fluorescent status display Defeatable bass and treble controls Enormous encapsulated toroid power transformer Dual layer glass epoxy circuit boards High resolution stereo headphone circuit RS-232 control port External IR input and loop output jacks Two 12v triggers; 1 input and 1 loop output Gold-plated RCA jacks No remote control Frequency Response: 5 Hz - 55 kHz, +0/-1 dB, full output Total harmonic distortion: < 0.01% 1 kHz; < 0.03% 20 kHz IM distortion: balanced 16 V rms < 0.03 % Maximum Output : > 8 V before clipping Input Impedance : > line input 30 kW; phono 47 kW Output Impedance : 60 ? Input Sensitivity: line inputs 150 mV, +/- 5%; phono 2 mV Maximum Input level: 10.5 V before clipping S/N ratio: line input >92 dB, A-weighted, ref 1 V output line input >84 dB, unweighted, ref 1 V output Cross-talk: > 55 dB, 20 kHz Channel level matching: < 0.1 dB Voltage: Switchable for 110V - 120V or 220V ? 240V operation Dimensions: 17-1/4 w x 4-1/8 h x 13-3/4 d, 3-5/8 h without feet Net weight: 16 lb. Fill free to ask any questions.

Kept in a smoke and pet-free environment since purchase, never had any issues, very versatile with RCA & Balanced inputs, also bridgeable Used to drive 4-ohm loads with no problem. Original double box and packing for first one sold. Have three in similar condition selling one at a time. Continuous power output:125 watts RMS x 2, 20 Hz - 20 kHz, 8 ?, both channels driven225 watts RMS x 2, 20 Hz - 20 kHz, 4 ?, both channels driven400 watts RMS x 1, 20 Hz - 20 kHz, 8 ? Power bandwidth:5 Hz - 100 kHz, +0/-3 dB at 1 watt Total harmonic distortion:< 0.06 % at full power IM distortion: balanced 16 V rms< 0.04 % Slew rate:> 130 V/µsecond Dynamic headroom:> 1.5 dB Interchannel crosstalk:> 80 dB at 1 kHz;> 63 dB at 20 kHz Input sensitivity:1 V for 28.28 V, THX Reference Level Input impedance:33 k ? S/N ratio:112 dB, input shorted, IHF A-weighted Damping factor:> 800 at 20 Hz Dimensions:17-1/4 w x 4-1/8 h x 13-1/4 d, 3-5/8 h without feet Net weight: 28 lb.

PARASOUND A31 only 2 Weeks old. I am selling this for a customer of mine. Like brand new still in the original box. It has never being hooked up.

Kept in a smoke and pet-free environment since purchase, never had any issues, very versatile with RCA & Balanced inputs, also bridgeable Used to drive 4-ohm loads with no problem. Original double box and packing for first one sold. Have three in similar condition selling one at a time. Continuous power output:125 watts RMS x 2, 20 Hz - 20 kHz, 8 ?, both channels driven225 watts RMS x 2, 20 Hz - 20 kHz, 4 ?, both channels driven400 watts RMS x 1, 20 Hz - 20 kHz, 8 ? Power bandwidth:5 Hz - 100 kHz, +0/-3 dB at 1 watt Total harmonic distortion:< 0.06 % at full power IM distortion: balanced 16 V rms< 0.04 % Slew rate:> 130 V/µsecond Dynamic headroom:> 1.5 dB Interchannel crosstalk:> 80 dB at 1 kHz;> 63 dB at 20 kHz Input sensitivity:1 V for 28.28 V, THX Reference Level Input impedance:33 k ? S/N ratio:112 dB, input shorted, IHF A-weighted Damping factor:> 800 at 20 Hz Dimensions:17-1/4 w x 4-1/8 h x 13-1/4 d, 3-5/8 h without feet Net weight: 28 lb.

Perfect condition, comes with original box and packing.

NPS Business Hours Monday - Friday 8 am - 4 pm (MST) Halo By Parasound A23+ Stereo Power Amplifier 120V Black * Manufacturer: Halo By ParasoundModel: A23+Description: Stereo Power Amplifier BlackPackaging Condition Details: New In Open Manufacturers Packaging. The Box Has Bends, Creases, Wear & Rips.Color: Black.Type: Stereo.160 Watts x 2 At 8 ohms RMS, Both Channels Driven.240 Watts x 2 At 4 ohms RMS, Both Channels Driven.500 Watts x 1 At 8 ohms, In Bridged Mode.Total Harmonic Distortion (THD): <0.06 %.Frequency Response: 5 Hz - 100 kHz.Intermodulation Distortion (IM): < 0.04 %.Damping Factor: >800 At 20Hz.Input Impedance: Unbalanced: 33 k Ohms, Balanced: 66 k Ohms, (33 k Ohms per leg).Voltage: 120 Volts.**We have recorded the serial number for this item in the event of a customer return. ** **This item is not eligible for combined shipping. Includes Amplifier, Power Cord, Audio Cable & The Instructions. Item Condition: Open box Package Condition: Open Manufacturers Packaging Payment Terms Please note that payment must be made within 7 days after the auction has ended. We only accept the following payment methods: No other payment method will be accepted. Credit Card Payments: We accept Visa, MasterCard, Discover and American Express. We no longer accept credit card payment over the phone.Ebay will add your states sales tax to your order. This is in addition to the sales price of the item and any shipping charges. Shipping Terms Orders with a value of $250 or more will require an adult signature at delivery, no exceptions. Combined Shipping YES, we offer combined shipping. All combined orders will be shipped UPS Ground. Please review the criteria for combined shipping with NPS: If you purchase more than one item from us, you can save on shipping by having your items combined. NPS will combine up to 10 items on a single invoice. Listings that have an asterisk (*) in the listing title are not eligible for combined shipping (including freight items). All items being combined must be paid for within our 7 day payment policy (see under Accepted Payment Methods). Items beyond 7 days are not eligible and cannot be combined. All items must be paid for on a single invoice. If items are paid for separately, they will not be eligible for the combined shipping discount. Please request a combined shipping invoice from us via email or phone prior to paying for your items to receive this discount. On a combined shipping order, each item without an asterisk (*) in the title will cost an additional $2 to ship. Heaviest item + $2 per each additional item (up to 9 additional items) Please Note: If your item is shipping via UPS Ground, you will need to check-out with a physical address to avoid your order being cancelled. UPS does not deliver to PO Box addresses and we cannot change the shipping address once payment is received. Local Pick-up We offer local pickup for our customers who want to save money and not pay for shipping. Pickup Location: 634 N. Challenger Road Salt Lake City, Utah 84116 Please be aware that while you will not be paying for shipping costs, eBay adds the Utah State Sales Tax of 7.75% to your order. Items must be picked up within 5 business days of when they are available. You must check out with an address located within the state of Utah to be eligible for local pick up. If you would like to pickup your item(s) in person, then you must follow these 3 steps below: Purchases are not available for pickup until the next business day after payment is received. For instance: if we receive your payment on Monday, your purchase will be ready for pickup on Tuesday. Items paid for on Friday will be available for pickup the following Monday. We DO NOT allow pickup on the same day of payment. Visit our Will Call Counter between the hours of 10:00 am and 4:00 pm (Mountain Time), Monday through Friday. Provide our staff with: Your eBay username, a form of identification, and a signature for your item(s). Return & Warranty Return Policy If the item you purchased was misrepresented by us or damaged in shipping: you can obtain a full refund. To get a full refund, you must call or email us within 30 days of receiving your item. Returns require our approval and return authorization and must be returned to us before we can issue your refund. Please note: we record serial numbers to discourage fraud. If you changed your mind and do not want your item: we can authorize you to return it for a refund of the cost of the item, not including shipping. We will not accept returns in cases when the condition of the item and/or retail packaging has been compromised, changed, modified or altered. The buyer is responsible for return shipping and is required to complete a “Mutual Agreement to Cancel the Transaction Form” through eBay. Local Pickups Returned items that were picked up locally from our store will be charged a processing and restocking fee of 10% of the sales price of the item. No restocking fee will be charged in cases where it is found NPS was erroneous in the listing description. 30 Days Returns will not be accepted beyond 30 days after the item has been delivered to or picked up by the buyer. Return Authorization All returns require a proper return authorization by an NPS customer service agent. Please Note: Items shipped to a US address which are then forwarded internationally, need to be inspected thoroughly by the buyer BEFORE forwarding. Once they are shipped internationally, we will not offer any support if items are damaged in transit. If the item is listed incorrectly, the return shipping charges would only be covered within the United States, and only if we are notified within the 30 day return policy period. Warranty Please note that we are not an authorized dealer for any of the products we list on eBay. Therefore we do not guarantee that the item featured in this listing will be covered by the manufacturers warranty or support. Employee:Allison F. Control Number:35514730 Bin Location:708-124A

Excellent condition, I am original owner with 1 year of use. Things that I know work: gain knobs, 12v trigger switch, front power button, L+R audio channels to speakers, XLR input. I did not use the other inputs or bridged mode during my ownership. Includes power cable and 12v trigger cable. Ships in original box. Sold as is, no warranty is provided by Parasound when purchasing from non-authorized retailers. Changes from the original A 23?A 23+125 ? 160 Watts (8?)225 ? 240 Watts (4?)400 ? 500 Watts (bridged)Filter cap: 40,000 uF ?54,400 uFCrosstalk (20kHz): 63dB ? 70dBTransformer size: 1.0 kVA ? 1.1 kVARefined Halo cosmetic with aluminum end caps & gold highlightsUpdated rear panel with heavy duty speaker terminals from HINT 6Upgraded internal gold on gold audio connectionsUpdated auto turn on circuitAll Features160 watts x 2 @ 8 ? RMS, both channels driven240 watts x 2 @ 4 ? RMS, both channels driven500 watts x 1 @ 8 ?, in bridged modeCircuitry designed by legendary John CurlHigh bias Class A/AB operation45 amperes peak current per channelStable with speaker impedance dips below 2 ?Balanced inputs with discrete circuitsHeavy-duty 24k gold-plated 5-way speaker binding postsGold-plated RCA input & loop output jacksDirect-coupled signal path, no capacitors or inductorsDC Servo and relay protection circuitsAC turn-on inrush surge protection with relay bypassJFET input stage, MOSFET driver stage12 beta-matched 15 ampere, 60 MHz bipolar output transistors1.1 kVA shielded toroid transformer w/ independent windings for each channelIndependent power supplies for input stage, driver stage and output stage54,400 µF filter capacitors for output stagesFull power is rated all the way down to 5Hz for unrestricted low-end bassHarris hyper-fast soft-recovery bridge diode rectifiersAutomatic turn-on by 12 V trigger or audio sensing2 rack space chassis with rear carry handlesRack mount hardware available separatelyAvailable in silver or black Power Output – Stereo Mode (0.06% THD)160 watts x 2, 8 ? both channels driven240 watts x 2, 4 ? both channels drivenPower Output – Stereo Mode (0.9% THD)210 watts x 2, 8 ? both channels driven300 watts x 2, 4 ? both channels drivenPower Output – Bridged Mode (0.06% THD)500 watts x 1, 8 ?Bridged 4 ? operation is not recommendedPower Output – Bridged Mode (0.9% THD)600 watts x 1, 8 ?Bridged 4 ? operation is not recommended*All Power measurement are at 120 VAC,RMS continuous power, full audio band (20 Hz - 20 kHz)Current Capacity45 amps peak, per channelSlew Rate> 130 volts per microsecondFrequency Response5 Hz - 100 kHz, +0/-3 dB20 Hz - 20 kHz, +0/-0.25 dBTotal Harmonic Distortion (THD)< 0.06 % at full power< 0.03 % at typical listening levelsIM Distortion< 0.04 %TIMUnmeasurableInter-channel Crosstalk> 85 dB at 1 kHz> 70 dB at 20 kHzInput ImpedanceUnbalanced: 33 k?Balanced: 66 k?,(33 k? per leg)Total Gain29 dBInput Sensitivity for 28.28 V Out (8 ? Load)Unbalanced: 1 VBalanced: 1 V per legS/N Ratio> 112 dB, input shorted, IHF A-weighted> 107 dB, input shorted, unweightedDamping Factor> 800 at 20 HzDC Trigger Requirements+9 Vdc to +12 Vdc, 5 mAAudio Trigger Requirements2 mV - 10 mVXLR Pin Identification1 = Ground (Shield)2 = Positive3 = Negative (Return)DimensionsWidth: 17-1/4 (437 mm)Depth: 15-1/4 (388 mm)Depth, with cables 17 (432 mm)Height, with feet: 4-1/8 (105 mm)Height, without feet: 3-1/2 (89 mm), 2UNet Weight27 lb. (12.2 kg)Shipping Weight34 lb. (14.4 kg)Power RequirementStandby: <1 WattIdle (no music playing): 75 WattsTypical Listening levels: 125 WattsMaximum: 800 Watts110-125 VAC 60 Hz or 220-250 VAC 50 HzAC mains voltage is set on rear panel

MINT Parasound JC3 Jr Phono Preamp. This unit was only used once for demonstration. This item is in brand new condition with no hours on it. The buyer passed away before the system was finished. Now his heir wants to sell all of the components. This unit sells new for $1499 + tax. This phono preamp was designed for Parasound by renowned John Curl. This is one of the highest rated phono stages in the $2000 price range. The original box was lost. It will be packed with care to be delivered in mint condition! You will love the performance this unit provides!

MINT Parasound JC3 Jr Phono Preamp. This unit was only used once for demonstration. This item is in brand new condition with no hours on it. The buyer passed away before the system was finished. Now his heir wants to sell all of the components. This unit sells new for $1499 + tax. This phono preamp was designed for Parasound by renowned John Curl. This is one of the highest rated phono stages in the $2000 price range. The original box was lost. It will be packed with care to be delivered in mint condition! You will love the performance this unit provides!

Halo by Parasound P3 Pre-Amplifier & A23 Stereo Power Amplifier THX Certified We are not the owner or seller of these goods, but merely a bailee acting on behalf of the seller to facilitate the sale of the goods by holding the goods until such time as a sale is completed and the goods are shipped to the buyer. Powered by CrossPostit

PARASOUND A31 only 2 Weeks old. I am selling this for a customer of mine. Like brand new still in the original box. It has never being hooked up.

Features Circuitry designed by legendary John Curl Lucasfilm Home THX Ultra2 certified High bias Class A/AB operation Balanced inputs with discrete circuits and XLR connectors Direct Coupled - no capacitors or inductors in signal path Complementary MOSFET driver stage and JFET input stage 12 beta-matched 15 amp, 60 MHz bipolar output transistors 1 kVA encapsulated toroid power transformer with independent secondary windings for each channel 40,000 ?F power supply filter capacitance DC Servo and relay protection circuits AC present, channel status, high temperature displays Heavy-duty 24k gold-plated 5-way speaker binding posts Gold-plated RCA input jacks; loop output jacks Auto turn-on by 12v trigger or audio signal Rear mounted gain controls, ground lift switch Specs Continuous power output: 125 watts RMS x 2, 20 Hz - 20 kHz, 8 ?, both channels driven 225 watts RMS x 2, 20 Hz - 20 kHz, 4 ?, both channels driven 400 watts RMS x 1, 20 Hz - 20 kHz, 8 ? Current capacity: 45 amperes peak per channel Power bandwidth: 5 Hz - 100 kHz, +0/-3 dB at 1 watt Total harmonic distortion: < 0.06 % at full power IM distortion: balanced 16 V rms < 0.04 % Slew rate: > 130 V/µsecond Dynamic headroom: > 1.5 dB Interchannel crosstalk: > 80 dB at 1 kHz; > 63 dB at 20 kHz Input sensitivity: 1 V for 28.28 V, THX Reference Level Input impedance: 33 k ? S/N ratio: 112 dB, input shorted, IHF A-weighted Damping factor: > 800 at 20 Hz Voltage: Switchable for 110V - 120V or 220V - 240V Dimensions: 17-1/4 w x 4-1/8 h x 13-1/4 d, 3-5/8 h without feet Net weight: 28 lb.

PARASOUND HALO A23+ BLACK 2-CHANNEL POWER AMP CLASS A/AB READY TO SHIP Up for sale is a Parasound Halo A23+ in Black finish. Amp is in excellent condition both in operation and cosmetics. Excellent looking and sounding amp with plenty of reserve power to drive any speakers you throw at it. Selling because I upgraded to a Halo 21+ amp which is another excellent amp with more power. Amp was sparingly used and stored in a temp-controlled closet, pet-free and non-smoking home. You will be happy with this amp. Changes from the original A23 and incorporated into the newer A23+ below:ES FROM THE ORIGINAL a23 ----> a23+125 ? 160 Watts (8?)125 ? 160 Watts (8?)225 ? 240 Watts (4?)400 ? 500 Watts (bridged)Filter cap: 40,000 uF ?54,400 uFCrosstalk (20kHz): 63dB ? 70dBTransformer size: 1.0 kVA ? 1.1 kVARefined Halo cosmetic with aluminum end caps & gold highlightsUpdated rear panel with heavy duty speaker terminals from HINT 6Upgraded internal gold on gold audio connectionsUpdated auto turn on circuit All Features160 watts x 2 @ 8 ? RMS, both channels driven240 watts x 2 @ 4 ? RMS, both channels driven500 watts x 1 @ 8 ?, in bridged modeCircuitry designed by legendary John CurlHigh bias Class A/AB operation45 amperes peak current per channelStable with speaker impedance dips below 2 ?Balanced inputs with discrete circuitsHeavy-duty 24k gold-plated 5-way speaker binding postsGold-plated RCA input & loop output jacksDirect-coupled signal path, no capacitors or inductorsDC Servo and relay protection circuitsAC turn-on inrush surge protection with relay bypassJFET input stage, MOSFET driver stage12 beta-matched 15 ampere, 60 MHz bipolar output transistors1.1 kVA shielded toroid transformer w/ independent windings for each channelIndependent power supplies for input stage, driver stage and output stage54,400 µF filter capacitors for output stagesFull power is rated all the way down to 5Hz for unrestricted low-end bassHarris hyper-fast soft-recovery bridge diode rectifiersAutomatic turn-on by 12 V trigger or audio sensing2 rack space chassis with rear carry handlesRack mount hardware available separatelyAvailable in silver or black Official Specs from Parasound :Power Output – Stereo Mode (0.06% THD) 160 watts x 2, 8 ? both channels driven 240 watts x 2, 4 ? both channels driven Power Output – Stereo Mode (0.9% THD) 210 watts x 2, 8 ? both channels driven 300 watts x 2, 4 ? both channels driven Power Output – Bridged Mode (0.06% THD) 500 watts x 1, 8 ? Bridged 4 ? operation is not recommended Power Output – Bridged Mode (0.9% THD) 600 watts x 1, 8 ? Bridged 4 ? operation is not recommended *All Power measurement are at 120 VAC, RMS continuous power, full audio band (20 Hz - 20 kHz) Current Capacity 45 amps peak, per channel Slew Rate > 130 volts per microsecond Frequency Response 5 Hz - 100 kHz, +0/-3 dB 20 Hz - 20 kHz, +0/-0.25 dB Total Harmonic Distortion (THD) < 0.06 % at full power < 0.03 % at typical listening levels IM Distortion < 0.04 % TIM Unmeasurable Inter-channel Crosstalk > 85 dB at 1 kHz > 70 dB at 20 kHz Input Impedance Unbalanced: 33 k? Balanced: 66 k?,(33 k? per leg) Total Gain 29 dB Input Sensitivity for 28.28 V Out (8 ? Load) Unbalanced: 1 V Balanced: 1 V per leg S/N Ratio > 112 dB, input shorted, IHF A-weighted > 107 dB, input shorted, unweighted Damping Factor > 800 at 20 Hz DC Trigger Requirements +9 Vdc to +12 Vdc, 5 mA Audio Trigger Requirements 2 mV - 10 mV XLR Pin Identification 1 = Ground (Shield) 2 = Positive 3 = Negative (Return) Dimensions Width: 17-1/4 (437 mm) Depth: 15-1/4 (388 mm) Depth, with cables 17 (432 mm) Height, with feet: 4-1/8 (105 mm) Height, without feet: 3-1/2 (89 mm), 2U Net Weight 27 lb. (12.2 kg)  Shipping Weight  34 lb. (14.4 kg) Power Requirement Standby: <1 Watt Idle (no music playing): 75 Watts Typical Listening levels: 125 Watts Maximum: 800 Watts 110-125 VAC 60 Hz or 220-250 VAC 50 Hz AC mains voltage is set on rear panel Reviews: LowBeats (Germany) November 2020 the Parasound P 6 and Parasound A 23+ play together in a pleasingly balanced and precise manner, while still musical with tonality that tends toward warmth. The consistently very supple reproduction and simultaneously true-to-size presentation and pin-point positioning of individual instruments and voices is amazing. Yes, this is how HiFi is fun.   » English Translation PDF Secrets of Home Theater & High Fidelity, November 2020 There is a lot to like in the reasonably-priced Parasound HALO A 23+ stereo amplifier. It is stylish, packs sufficient amplification power, and delivers solid high-fidelity sonic performance. ON-OFF  (Spain) September, 2019 One strength is its capability to reproduce a wide sonic palette, with depth and plenty of micro information. Parasound's power amp is able to bring out the best bass from speakers. Different kinds of music made us appreciate the unusual character of this amplification. Outstanding! Soundstage Network  July 2019 Reviewer's Choice Parasound provides great value in the Halo A 23+. I haven't heard better sound or seen higher build quality at this price. An impressive power amplifier. Stereo+ (Norway) January 2019 Together, the Parasound P 6 and A 23+ are dynamite. Pure sonic magic with brilliant dynamics, delicious midrange and impressive resolution. To get such good sound for the price of this duo seems almost unnatural. One incredibly appealing preamp-amplifier package from Parasound. Thanks for looking and happy bidding. Good luck!

Parasound Halo A 23 2-Kanal Endstufe.Gebraucht, aber in gutem technischem Zustand, einige Kratzer, habe diese in mehreren Fotos zu zeigen versucht, sind überwiegend auf der Oberseite,siehe Fotos.Gerät wird wegen den Kratzern günstiger angeboten. High End Gerät mit reichlich Leistung, Daten im Netz unter parasound.com. Versand auf Risiko des Käufers möglich. Privatverkauf ohne Garantie, Gewähr und keine Rücknahme, keine Sachmängelhaftung, aus Nichtraucherhaushalt. Mit Kauf erkennen Sie diese Bedingungen an. Kein internationaler Versand! Nochmal: das Gerät hat mehrere Kratzer!!!!!!!

excellent condition. The Parasound Halo JC 3+ is a Golden Ear Award Winner

The following items have been tested and are working, Make sure to look at all of the pictures and feel free to ask me any questions. Both are in great condition with very light scratches. All of the items come with what is shown in the pictures, if the title contradicts the pictures please notify me. No sale will end early if put on auction. Thank You

Like New condition! I bought this brand new earlier this year, and used it for only about a month or so. Great sounding amp!! Stereophile magazine rated class A. But then I found a great deal on a Pass Labs amp, and have decided to let this one go. MSR $3,499 Asking $2,500 (Offers will be considered) Original Box and Shipping Materials — The outer box is a little rough but the inner box is in excellent condition with all styrofoam inserts to assure safe shipping.