Description
Excellent sounding Oppo HA-1 Top of the line Class A Stereo Headphone amp, Discrete output transistors, toroidal power transformer for ultra quiet operation, fully balanced and unbalanced connectivitiy, ESS Sabre 32 Reference DAC, Bluetooth, Asynchronous USB DAC, the remote control was lost but a remote control app is available for both Apples iPhone and Android-based smartphones. The app works over Bluetooth and offers the same functionality as the physical remote control. I used the amp without remote and was able to access all settings manually on the front of the amp. It can also be used as a superb stereo preamp fully balanced or unbalanced. Loaded with every conceivable features, easy to operation, very powerful and quiet sweet sounding Class A performance musicality. It has always been in a non smoking climate controlled environment. There are no scratches, no dings, no dents, pristine original and very well cared for condition. It sounds as good as it looks and is incredibly built and designed. It is powerful, dynamic, involving, detailed, transparent, open, spacious, smooth, natural and musical. It never failed to drive any headphone in my collection, including some very inefficient headphones, no problems at all. It is dead quiet. It has some nice display choices and also where you can turn the display off, very versatile and flexible. See the impressive specs below. Also, see the impressive and highly rated recommendations on line. It comes with the inner protective form fitted packing and IEC power cord. Buy with confidence, see my feedback. This is an outstanding amplifier. Good Listening, SonnY :) Discrete Class A Amplifier A Class A amplifier conducts signal over the entire range of the input signal cycle. The output transistors are biased to operate in their most linear range, and there is no crossover distortion caused by switching the signal between two push-pull devices. The HA-1s power amplification circuit for the headphones is Class A built with discrete transistors. The discrete design allows us to hand-pick and match the best parts to build the HA-1. Toroidal Power Supply A toroidal power transformer offers superior power efficiency and much lower exterior magnetic fields over traditional laminated steel core transformers. The HA-1s toroidal linear power supply provides a very clean and robust power source to the audio components. Fully Balanced Design The internal analog audio signal path of the HA-1 is fully balanced. For digital audio, the signal runs in balanced mode all the way from the DAC to the output jacks. Balanced analog input is kept intact, and single-ended input is converted to balanced at the input buffer. All single-ended outputs are derived from the balanced signal as well. The balanced design provides better common-mode noise rejection and improves signal quality. The balanced headphone output provides twice the voltage and four times the power of the single-ended output, enabling the HA-1 to drive the most power hungry headphones. It also provides better channel seperation by eliminating the common ground return path. ESS Sabre32 Reference DAC The DAC is one of the most important components for digital audio playback. The SABRE32 Reference ES9018 from ESS Technology is the world’s best performing 32-bit audio DAC solution targeted for high-end consumer applications and professional studio equipment. With the ESS patented 32-bit Hyperstream™ DAC architecture and Time Domain Jitter Eliminator, the SABRE32 Reference DAC delivers an unprecedented DNR (Dynamic Range) of up to 135dB and THD+N (Total Harmonic Distortion plus Noise) of -120dB, the industry’s highest performance level that will satisfy even the most demanding audio enthusiast. To learn more about the technologies behind the exceptional performance of the SABRE DAC, please read the SABRE Technical White Paper. OPPO HA-1 4.3 information display OPPO HA-1 Screenshots Clean Signal Path The HA-1 uses an analog potentiometer (the familar volume knob) to control the volume. By avoiding re-digitizing the audio signal for volume adjustment, the HA-1 provides a clean signal path for the audio. At the same time, the convenience of modern digital volume control is not lost - a remote-controlled motor turns the volume knob and a 10-bit analog-to-digital converter samples the signal to display a numeric dB level. Made for iPod®, iPhone® and iPad® The HA-1 passes Apples MFi certification and is compatibile with the latest iPod, iPhone and iPad to be used as the digital audio output accessory of these devices. By tapping directly into the digital audio signal of these devices and converting the audio to analog using the high performance SABRE32 Reference DAC, music from your favorite portable device will sound its best. Wireless Audio via Bluetooth The HA-1 supports Bluetooth Advanced Audio Distribution Profile (A2DP) with both the standard and aptX® high quality codec. Simply pair your phone with the HA-1 and set music free wirelessly from your mobile phone. Asynchronous USB DAC By bypassing the low fidelity, poor quality DAC of traditional computer soundcards, the HA-1 turns any computer into a high performance multi-media source by converting digital audio to analog through the ESS Sabre32 Reference DAC. The asynchronous transfer mode uses the high precision clock inside the HA-1 to drive the audio signal, not relying on the clock quality of the computer. HA-1s USB DAC input supports PCM up to 384 kHz 24-bit and DSD up to 12 MHz (DSD256). Adjustable Gain Setting The headphone power amplifier has an adjustable gain setting. For optimal sound quality and to best match your headphones sensitivity, you can choose between Normal and High for the Headphone Gain setting. Build Quality The HA-1 is housed in a brushed aluminum chassis. The Class A amplifier naturally consumes more power and generate more heat than other types of amplifiers, so the HA-1 is designed with ample ventilation and built with the finest components to ensure long term stability and performance. Tipping the scale at 13 lbs, the HA-1 is a solidly built desktop headphone amplifier. Stereo Pre-Amplifier with Home Theater Bypass The HA-1 doubles as a high fidelity stereo pre-amplifier with both RCA and XLR output ports. A special Home Theater Bypass mode can be assigned to any input source, making it very easy to integrate the HA-1 as a stereo pre-amplifier into a home theater sound system. Trigger Input & Output The HA-1 features 12V trigger input and output. When used as a stereo pre-amplifier, the trigger output can turn on your power amplifiers automatically when the HA-1 is turned on. You can also turn on the HA-1 automatically by connecting its trigger input to the trigger output of a source device or a surround sound processor. Remote Control & App The HA-1 comes with a remote control that provides volume control, direct source selection and even playback control for digital audio sources. A remote control app is available for both Apples iPhone and Android-based smartphones. The app works over Bluetooth and offers the same functionality as the physical remote control. SPECIFICATIONS Designs and specifications are subject to change without notice. General Dimensions (W x H x D) 10.0 x 3.6 x 13.1 inches, 254 x 91 x 333 mm Mass 13.0 lbs, 5.9 kg Power Supply AC 110-120 V~ / 220-240 V~, 50/60 Hz auto-sensing Power Consumption 70 W (operation), 0.5 W (standby) Trigger Input 3.5 V – 15 V, 10mA minimum Trigger Output 12 V, 100 mA maximum Operating Temperature 41 °F - 95 °F, 5 °C - 35 °C Operating Humidity 15% - 75% No condensation Recommended Headphone Impedance 32 ohm – 600 ohm Balanced Headphone Jack Output (XLR-4) Pin order 1: L+, 2: L-, 3: R+, 4: R-, Shell: GND 6.35 mm Headphone Jack Output Pin order Tip: L, Ring: R, Sleeve: GND XLR Balanced Audio Input Input Impedance 15k ohm Maximum Input Level 18 Vrms, +27.3 dBu (0 dBu = 0.775 Vrms) RCA Stereo Audio Input Input Impedance 10k ohm Maximum Input Level 9 Vrms, +21.3 dBu (0 dBu = 0.775 Vrms) Coaxial, Optical, AES/EBU Digital Inputs Input Format Stereo PCM Sampling Frequencies 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz Word Length 16-bit, 24-bit USB DAC Audio Input (USB B Type) Input Format Stereo PCM, Stereo DSD (DoP v1.1 or native) PCM Sampling Frequencies 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz, 352.8 kHz, 384 kHz PCM Word Length 16-bit, 24-bit, 32-bit DSD Sampling Frequencies 2.8224 MHz (DSD64), 5.6448 MHz (DSD128), 11.2896 MHz (DSD256, native mode only) Profile USB 2.0, USB Audio 2.0 Mobile USB Audio Input (USB A Type) Input Format Stereo PCM PCM Sampling Frequencies 44.1 kHz, 48 kHz Profile USB 2.0, USB Audio 2.0 VBUS Power Output +5 V, 2.1 A Bluetooth Audio Input Standard Bluetooth 2.1+EDR Profile iAP, SPP, AVRCP, A2DP Audio Transmission Format SBC, aptX DAC Performance Specifications Specification XLR Output RCA Output Output Level 4.6 ± 0.3 Vrms 2.3 ± 0.3 Vrms Frequency Response (Tested with -10 dBFS / 384 kHz) 10 Hz – 170 kHz (+0/-3 dB) 20 Hz – 20 kHz (+0/-0.07 dB) 10 Hz – 170 kHz (+0/-3 dB) 20 Hz – 20 kHz (+0/-0.07 dB) THD+N at 1 kHz (A Weight, 20 Hz – 20 kHz) < 0.00056% (< -105 dB) < 0.00056% (< -105 dB) Channel Separation > 105 dB > 105 dB Signal-to-Noise Ratio (A Weight, 20 Hz – 20 kHz) > 115 dB > 113 dB Dynamic Range (1 kHz -60 dBFS, A Weight, 20 Hz – 20 kHz) > 115 dB > 113 dB (Test condition: USB DAC input in Home Theater Bypass mode and the volume knob at Max position.) Pre-amplifier Performance Specifications Specification XLR Input – XLR Output RCA Input – RCA Output Rated Output Level 4.6 Vrms 2.3 Vrms Frequency Response 10 Hz – 200 kHz (+0/-2 dB) 20 Hz – 20 kHz (+0/-0.04 dB) 10 Hz – 200 kHz (+0/-2 dB) 20 Hz – 20 kHz (+0/-0.04 dB) THD+N at 1 kHz (A Weight, 20 Hz – 20 kHz) < 0.00056% (< -105 dB) < 0.00071% (< -103 dB) Channel Separation > 120 dB > 110 dB Signal-to-Noise Ratio (A Weight, 20 Hz – 20 kHz) > 110 dB > 105 dB Dynamic Range (1 kHz -60 dB, A Weight, 20 Hz – 20 kHz) > 120 dB > 115 dB Maximum Gain (100 mVrms input) 6 dB 6 dB (Test condition: Volume knob at Max position and an input signal to drive the output to the rated output level.) Headphone Amplifier Performance Specifications Specification Condition XLR Input - Balanced Output RCA Input - 6.35 mm Output Maximum Output Power (Per Channel) Into 600 Ohm 2400 mW 600 mW Into 32 Ohm 3000 mW 3500 mW Rated Output Power (Per Channel) Into 600 Ohm 800 mW 200 mW Into 32 Ohm 2000 mW 500 mW Frequency Response 10 Hz – 200 kHz (+0/-1 dB) 20 Hz – 20 kHz (+0/-0.04 dB) 10 Hz – 200 kHz (+0/-1 dB) 20 Hz – 20 kHz (+0/-0.04 dB) THD+N at 1k Hz (A Weight, 20 Hz – 20 kHz) Rated Power < 0.0018% (< -95 dB) < 0.0056% (< -85 dB) 50 mW < 0.001% (< -100 dB) < 0.0022% (< -93dB) Channel Separation > 120 dB > 90 dB Signal-to-Noise Ratio (A Weight, 20 Hz – 20 kHz) > 111 dB > 111 dB Dynamic Range (1 kHz -60 dB, A Weight, 20 Hz – 20 kHz) > 120 dB > 115 dB Output Impedance 0.5 Ohm 0.7 Ohm
Live search