SAPHIRE DIAMOND STYLUS FÜR PLATTENSPIELER Kompatibel für LENCO L85 - LENCO M85 ZelleÜberprüfen Sie, ob Ihr Diamant mit dem auf dem Foto identisch ist, ein Plattenspieler kann manchmal einen anderen Tonabnehmer oder eine andere Spitze mit derselben Referenz haben SCHNELLER VERSAND IM FOLGENDEN SCHREIBEN SAPHIRE DIAMOND STYLUS FÜR PLATTENSPIELER Kompatibel für LENCO L85 - LENCO M85 Zelle Überprüfen Sie, ob Ihr Diamant mit dem auf dem Foto identisch ist,  ein Plattenspieler kann manchmal einen anderen Tonabnehmer oder eine andere Spitze mit derselben Referenz haben SCHNELLER VERSAND IM FOLGENDEN SCHREIBEN SAPHIRE DIAMOND STYLUS FÜR PLATTENSPIELER Kompatibel für LENCO L85 - LENCO M85 Zelle Überprüfen Sie, ob Ihr Diamant mit dem auf dem Foto identisch ist,  ein Plattenspieler kann manchmal einen anderen Tonabnehmer oder eine andere Spitze mit derselben Referenz haben SCHNELLER VERSAND IM FOLGENDEN SCHREIBENSAPHIRE DIAMOND STYLUS FÜR PLATTENSPIELER Kompatibel für LENCO L85 - LENCO M85 Zelle Überprüfen Sie, ob Ihr Diamant mit dem auf dem Foto identisch ist,  ein Plattenspieler kann manchmal einen anderen Tonabnehmer oder eine andere Spitze mit derselben Referenz haben SCHNELLER VERSAND IM FOLGENDEN SCHREIBEN

Abzugeben ist eine sehr seltene Kompaktanlage, welche technisch nicht in meine Sammlung passt. Ich habe mich auf Röhrengeräte und große Bandmaschinen spezialisiert und zudem ist leider auch unser Platz im Haus endlich... Diese Anlage wurde von mir vollständig restauriert, repariert und komplett neu abgeglichen. Der UKW- Bereich wurde nach oben erweitert (von 104 auf 106,5 MHz) und anschließend alle Wellenbereiche vollständig neu abgeglichen. Auch der Plattendreher ist komplett überholt und hat zudem ein komplett neues System so wie eine neue (gebrauchte) Trägerplatte erhalten (die alte gibt es dazu). Zudem wurden diverse Kondensatoren gewechselt und alle Leuchtmittel ersetzt. Auch die Endstufen sind selbstverständlich bezgl. Arbeitspunkt und DC-Balance neu abgeglichen. Leider sind auch ein paar kleine Schönheitsfehler vorhanden. Von normalen Nutzungsspuren mal abgesehen hat die Haube leider an beiden vorderen Ecken Ausbrüche (siehe Bilder). Technische Daten und weitere Informationen sind umfangreich im radiomuseum_org so wie hifi-wiki_de zu finden. Probehören und Test gerne vor Ort. Zudem übernehme ich für die von mir ausgeführten Arbeiten 6 Monate Gewährleistung ohne weitere rechtliche Ansprüche. Versand ist u.U. möglich, dann aber unter Eigenregie des Käufers. Pers. Abholung wäre sicherlich dringend angeraten. *****-----*****-----***** - Das Übliche zum Schluss - * Wir sind private Anbieter und betreiben kein Gewerbe. Daher sind Garantie- und/oder Gewährleistungsansprüche ausgeschlossen. * Wenn im Text eine Garantie/Gewährleistung angegeben, dann basiert die auf gutem Willen, aus dem sich kein Rechtsanspruch ableiten lässt. * Kommunikation in ganzen Sätzen, brauchbarer Rechtschreibung ohne GenderGaga wäre toll. Unverschämte Angebote und/oder gegendertern Sprechdurchfall ignorieren wir. * Wir garantieren volle Funktionsfähigkeit bei Übergabe resp. bei Versand, von der sich jeder gerne selbst vor Ort überzeugen kann und sollte.

Set of two anti skate weights the heavier 4.0g and lighter 1.0g that would have shipped with the Goldring Lenco GL75 and GL85 turntables. I have also been told that often they were supplied with three weights in the box 4.0g, 2.0g and 1.0g so I have created another listing with all three of those weights (Set B). I also list individual weights separately as well. These anti skate weights are made as a close replica of the originals. They are made to the correct mass value required but they my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the pair of anti skate weights and their monofilament lines only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply an extra free line with this set. *

Set of three anti skate weights 4.0g, 2.0g and 1.0g I have been told that originally would have shipped with the Goldring Lenco GL75 and GL85 turntables. Although the manual shows the use of 2 weights the 4g and the 1.0g so I also offer those as a two weight set in another listing and if you just require the individual weights I list those as well. These anti skate weights are made as a close replica of the originals. They are made to the correct mass value required but they my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the three anti skate weights and their monofilament lines only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and this set is also supplied with extra spare lines. *

Goldring Lenco fold-out sales brochure. Covers GL72P, Gl75P, GL85, G99, 101P, G66, VV7 etc In good condition, as shown in the photos. Approx size is 7.25 x 9.25 when closed. UK delivery only.

Lenco Nadel-Einstellehre Zubehör für Justierung des Systems Beschreibung: original Lenco Nadel-Einstellehre für Lenco L85 Plattenspieler Zustand: guter Zustand einwandfreier Zustand Lieferumfang: 1 original Lenco Nadel-Einstellehre wie beschrieben und abgebildet §§§ Privatverkauf ohne Rücktrittsrecht und unter Ausschluss jeglicher Garantie oder Gewährleistung §§§

Set of two anti skate weights the heavier 4.0g and lighter 1.0g that would have shipped with the Goldring Lenco GL75 and GL85 turntables. I have also been told that often they were supplied with three weights in the box 4.0g, 2.0g and 1.0g so I have created another listing with all three of those weights (Set B). I also list individual weights separately as well. These anti skate weights are made as a close replica of the originals. They are made to the correct mass value required but they my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the pair of anti skate weights and their monofilament lines only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply an extra free line with this set. *

Set of three anti skate weights 4.0g, 2.0g and 1.0g I have been told that originally would have shipped with the Goldring Lenco GL75 and GL85 turntables. Although the manual shows the use of 2 weights the 4g and the 1.0g so I also offer those as a two weight set in another listing and if you just require the individual weights I list those as well. These anti skate weights are made as a close replica of the originals. They are made to the correct mass value required but they my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the three anti skate weights and their monofilament lines only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and this set is also supplied with extra spare lines. *

Vintage Lenco GL85 Vinyl Record Player Turntable with SHURE *Spares or Repair* Vintage turntable record player switches on, platter spins,, light comes on and had needle on cartridge which was playing fine on both speeds so could hear the record playing but then needle went so will need some restoration but generally looks good for its age with main parts present and correctlid has a small hairline crack to from the back to top as picturedphono plugs have some rust on them so could do with replacingsmall crack to the plastic around the part that holds the arm above the record One of the better models from Goldring Lenco this is worth restoring it is quality, Made in SwitzerlandHas SHURE M75ED Type 2 no needle FREE UK POSTAGE included and worldwide postage available using ebay global shipping service Same or next working day dispatch or can be collected in person which is preferred on this type of item if possible so if posting i will try to pack with plenty of bubble wrap and a good box but will be at buyers risk as couriers do not cover turntables no refunds, returns or negative comments so only buy this if you have read this and are sure

1 Bouton Potentiomètre/Sélecteur pour platine Lenco L85 en parfait état.

Set of two anti skate weights the heavier 4.0g and lighter 1.0g that would have shipped with the Goldring Lenco GL75 and GL85 turntables. I have also been told that often they were supplied with three weights in the box 4.0g, 2.0g and 1.0g so I have created another listing with all three of those weights (Set B). I also list individual weights separately as well. These anti skate weights are made as a close replica of the originals. They are made to the correct mass value required but they my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the pair of anti skate weights and their monofilament lines only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply an extra free line with this set. *

Set of three anti skate weights 4.0g, 2.0g and 1.0g I have been told that originally would have shipped with the Goldring Lenco GL75 and GL85 turntables. Although the manual shows the use of 2 weights the 4g and the 1.0g so I also offer those as a two weight set in another listing and if you just require the individual weights I list those as well. These anti skate weights are made as a close replica of the originals. They are made to the correct mass value required but they my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the three anti skate weights and their monofilament lines only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and this set is also supplied with extra spare lines. *

Set of three anti skate weights 4.0g, 2.0g and 1.0g I have been told that originally would have shipped with the Goldring Lenco GL75 and GL85 turntables. Although the manual shows the use of 2 weights the 4g and the 1.0g so I also offer those as a two weight set in another listing and if you just require the individual weights I list those as well. These anti skate weights are made as a close replica of the originals. They are made to the correct mass value required but they my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the three anti skate weights and their monofilament lines only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and this set is also supplied with extra spare lines. *

Set of two anti skate weights the heavier 4.0g and lighter 1.0g that would have shipped with the Goldring Lenco GL75 and GL85 turntables. I have also been told that often they were supplied with three weights in the box 4.0g, 2.0g and 1.0g so I have created another listing with all three of those weights (Set B). I also list individual weights separately as well. These anti skate weights are made as a close replica of the originals. They are made to the correct mass value required but they my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the pair of anti skate weights and their monofilament lines only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply an extra free line with this set. *

Lenco gl85 - Record player, turntable, retro, Vinyl, LP swiss,. Used, condition as shown. Still working, Broken lid but with hinges intact. Manual included. Collection only.

Set of two anti skate weights the heavier 4.0g and lighter 1.0g that would have shipped with the Goldring Lenco GL75 and GL85 turntables. I have also been told that often they were supplied with three weights in the box 4.0g, 2.0g and 1.0g so I have created another listing with all three of those weights (Set B). I also list individual weights separately as well. These anti skate weights are made as a close replica of the originals. They are made to the correct mass value required but they my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the pair of anti skate weights and their monofilament lines only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply an extra free line with this set. *

Set of three anti skate weights 4.0g, 2.0g and 1.0g I have been told that originally would have shipped with the Goldring Lenco GL75 and GL85 turntables. Although the manual shows the use of 2 weights the 4g and the 1.0g so I also offer those as a two weight set in another listing and if you just require the individual weights I list those as well. These anti skate weights are made as a close replica of the originals. They are made to the correct mass value required but they my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the three anti skate weights and their monofilament lines only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and this set is also supplied with extra spare lines. *

Plattenspieler Lenco L75, L85 Defekt / Ersatzteile.

Set of three anti skate weights 4.0g, 2.0g and 1.0g I have been told that originally would have shipped with the Goldring Lenco GL75 and GL85 turntables. Although the manual shows the use of 2 weights the 4g and the 1.0g so I also offer those as a two weight set in another listing and if you just require the individual weights I list those as well. These anti skate weights are made as a close replica of the originals. They are made to the correct mass value required but they my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the three anti skate weights and their monofilament lines only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and this set is also supplied with extra spare lines. *

Set of two anti skate weights the heavier 4.0g and lighter 1.0g that would have shipped with the Goldring Lenco GL75 and GL85 turntables. I have also been told that often they were supplied with three weights in the box 4.0g, 2.0g and 1.0g so I have created another listing with all three of those weights (Set B). I also list individual weights separately as well. These anti skate weights are made as a close replica of the originals. They are made to the correct mass value required but they my differ cosmetically to the original manufacturers weight. * Please note that this auction is for the pair of anti skate weights and their monofilament lines only. The line is knotted and has a small balancer that goes inside the weight but the end that attaches to the anti skate bar of the tonearm is open ended and therefore you must tie the loop end yourself. Length of the line supplied is 25cm which is enough extra line for a couple of attempts and I will supply an extra free line with this set. *