Just the walnut cabinets from a pair of JBL J60T speakers. No grille covers. The grille covers are inu another auction.Thanks for bidding!

Just the walnut cabinets from a pair of JBL J60T speakers. No grille covers. The grille covers are inu another auction.Thanks for bidding!

Just the walnut cabinets from a pair of JBL J60T speakers. No grille covers. The grille covers are inu another auction.Thanks for bidding!

Just the walnut cabinets from a pair of JBL J60T speakers. No grille covers. The grille covers are inu another auction.Thanks for bidding!

Car Audio & VideoPro AudioMarine AudioLighting Karaoke Home/Portable Audio JBL COL600-BK 24 Black 70V Commercial Slim Column Wall Mount Array Speaker --> Click Thumbnails to Enlarge Condition and Warranty Condition: OPEN BOX Warranty: 1 YEAR AUDIOSAVINGS Product Description Description: The JBL COL600 is an elegant 24-inch (600 mm) slim column loudspeaker that provides wide horizontal and narrow vertical coverage, with a built-in 10° down-tilt to the aim, providing optimum coverage for most listening areas while allowing the speaker to be installed flat to the wall. The slim, compact design—winner of international design awards for industrial design excellence—complements virtually any architectural décor. A combination of stylish design and outstanding performance features makes the COL600 ideal for a wide variety of applications, such as conference/meeting rooms, lecture halls, retail stores, concourses, transit spaces, fill applications, audio for video, and other applications where slim, compact design and high performance is desired. Two 5-inch x 2.25 inch racetrack woofers provide maximum radiating area in a column form factor. The tweeter is located at top of array for less obstructed coverage of the listening space and is aimed at a down angle, allowing down-tilted coverage aim, even with the cabinet flat to the wall. The shallow cabinet depth of 3.7 inches (93 mm) qualifies for ADA (Americans with Disabilities Act) projects when installed with the back of the cabinet flush to the wall. A 20-watt multi-tap transformer allows for use on either 70V or 100V distributed speaker lines, while the speaker is switchable for direct 8-ohm operation with power handling of 80W continuous (320W peak, 2 hrs.) The 70 Hz to 20 kHz frequency range delivers clean, clear sound for music or speech. Versatile installation is accommodated by two included L-brackets, which can be installed on either the top and bottom panels (for horizontal pan aiming) or on the left and right side panels. Both locations allow for close-to-the-wall installation. In addition, a low-profile swivel (pan) / tilt wall bracket is also included, for adding up to 10° down-tilt to the cabinet aiming (in addition to the built-in 10° down-tilt aim when the speaker is installed flat to the wall). The COL600 has an IP54 rating (per IEC60529) for protection against ingress of dust or water. The drivers are water-treated, the grille has a water-backing, and a cover is included to protect the input terminals. Features:Two 5 x 2.25 inch racetrack woofers & one 1 inch tweeter 24 inch tall with shallow 3.7 inch cabinet depth Wide 160° horizontal and focused 110° vertical coverage 10° downward tilt to aim for covering most listening areas without requiring physical down- tilting of the cabinet 80W continuous pink noise power handling (320W peak) 70 Hz – 20 kHz frequency range Built-in 20W 70V/100V multi-tap transformer, plus 8 ohm direct input. 111 dB peak SPL (105 dB continuous), 2 hrs Tweeter near top of column for unobstructed coverage of listening space Versatile mounting brackets included – both Common Applications:The JBL COL600 slim column loudspeaker is ideal for a wide variety of applications, such as conference/meeting rooms, lecture halls, retail stores, concourses, transit spaces, fill applications, audio for video, and other applications where slim, compact design and high performance is desired. Specifications: Frequency Range (-10 dB)¹: 70 Hz – 20 kHz Frequency Response (+/-3 dB): 105 Hz – 20 kHz Power Rating (8? setting)2: 160W Continuous Program (2 hrs) 80W (320W peak) Continuous Pink Noise (2 hrs) 60W (240W peak) Continuous Pink Noise (100 hrs) Sensitivity (2.83V @ 1m): 86 dBColor: Black Coverage Pattern: Vertical 110° [1kHz-4 kHz average] 10° down-tilt to aiming access for+25°/-45° coverage in relation to physical cabinet aim Horizontal 160° [1kHz – 4 kHz average] Directivity (Q): 7.8 Directivity Index (DI): 8.9 dB Rated Maximum SPL: 105 dB Continuous (111 dB peak) @ 1m Nominal Impedance: 8? (in Thru/direct mode) Minimum Impedance: 7.0 ?@ 275 Hz Transformer Taps: 20W, 10W, 5W @ both 70V & 100V (plus 2.5W @ 70V), and 8? thru, selectable via switch Transformer Insertion Loss: Less than 1 dB for all taps Maximum Input Voltage: 21 V RMS (2 hrs), 42 V peak Recommended Protective High-Pass: 70 Hz for 8 ? operation; 60 Hz for all transformer tap settings (20W, 10W, 5W and 2.5W) Drivers: Two 125 x 55 mm (5 x 2.25 in.) racetrack LF drivers One 25 mm (1 in.) tweeter (tweeter located at top of array for better coverage of listening space) Enclosure Material: PC + ABS, UL94-V0 flammability rating Grille: Plated SPCC with polyester powder coat finish Agency Ratings: Transformer UL recognized. RoHS, REACH compliance. LVD for CE. Environmental Rating: IP-54 rated per IEC60529, dust and water protected when installed with included rain cover for input terminal compartment and no physical up-tilt cabinet aiming. UV resistant. [Cycle 1 per ISO 4892.3-2006] Terminals: 4-pin Euroblock connection for bare wire, accepts 24 to 14 AWG gauge wire (0.25 to 2.5 sq mm). Rain cover allows for one or two 2-wire cables, with max cable jacket diameter of 8 mm (0.3 in) Insert Points: Top & Bottom Caps: 1 threaded insert point on each cap (top & bottom, 2 insert points total) for L-BRACKETS; attach via included M6 x 28 mm bolts, flat washers, and lock washers. (Remove silicon caps over insert points AND remove pre-installed bolts holding end cap in place.) [Note: For installer-specified attachment to these threaded insert points (without L-bracket), threaded insert is M6 x 28 mm deep.] Side Panels: 1 threaded insert point on each side (left and right, for 2 insert points total) for L-BRACKETS; attach via included M6 x 28 mm bolts, flat washers, and lock washers. (Remove silicon caps over insert points.) [Note: For installer-specified attachment to these threaded insert points (without L-bracket), insert is M6 x 22 mm deep.] Mounting: Included Swivel (Pan) / Tilt WALL BRACKET provides continuously variable ±95° degree Horizontal left-right swivel (pan) aiming (at 0° down-tilt); continuously adjustable +0°/-10° Vertical tilt (when no interference to wall); WALL and SPEAKER sections of WALL BRACKET ASSEMBLY attach together via included M6 x 12 mm bolts, flat washers, and lock washers. Two included L-brackets that can be positioned on either top & bottom insert points or side-side insert points. Top, bottom, and 2 side threaded insert points can be interfaced by installer for installer-supplied mounting methods. Installer responsible for safety of mounting method. Dimensions (H x W x D): 598 x 102 x 93 mm (23.6 x 4.1 x 3.7 inches) Net Weight: 3.5 kg (7.8 lbs) each Shipping Weight: 4.5 kg (10.0 lbs) each (packed 1 speaker per carton) Included Accessories: Low-profile Swivel (Pan) / Tilt WALL BRACKET; 2 x L-BRACKETS that can be positioned on top/bottom or side/side insert points. Return Policy AudioSavings Return Policy: At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA. Prior to returning merchandise, contact us and we will give you a return authorization # and a return label. You may return this item for a refund within 30 DAYS of purchase. Warranty Repair/Exchange Period: 1 YEAR If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options: We will send you a pre-paid shipping label to replace the item for a brand new one. We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you. If you are returning a working item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free. Replacement/Processing Time: Your replacement or refund will process within 3-5 business days of when we receive the item. Please note items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned. You MUST notify us within 48 hours if you receive an item that was damaged during shipping. Process for returning items Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility. Item Code: JBL-COL600-BK* Home / About Us / Contact Us / Returns / FAQs Copyright © 2016 Audio Savings, All rights reserved. | eBay Template Design

Just the walnut cabinets from a pair of JBL J60T speakers. No grille covers. The grille covers are inu another auction.Thanks for bidding!

Car Audio & VideoPro AudioMarine AudioLighting Karaoke Home/Portable Audio JBL COL600-BK 24 Black 70V Commercial Slim Column Wall Mount Array Speaker --> Click Thumbnails to Enlarge Condition and Warranty Condition: OPEN BOX Warranty: 1 YEAR AUDIOSAVINGS Product Description Description: The JBL COL600 is an elegant 24-inch (600 mm) slim column loudspeaker that provides wide horizontal and narrow vertical coverage, with a built-in 10° down-tilt to the aim, providing optimum coverage for most listening areas while allowing the speaker to be installed flat to the wall. The slim, compact design—winner of international design awards for industrial design excellence—complements virtually any architectural décor. A combination of stylish design and outstanding performance features makes the COL600 ideal for a wide variety of applications, such as conference/meeting rooms, lecture halls, retail stores, concourses, transit spaces, fill applications, audio for video, and other applications where slim, compact design and high performance is desired. Two 5-inch x 2.25 inch racetrack woofers provide maximum radiating area in a column form factor. The tweeter is located at top of array for less obstructed coverage of the listening space and is aimed at a down angle, allowing down-tilted coverage aim, even with the cabinet flat to the wall. The shallow cabinet depth of 3.7 inches (93 mm) qualifies for ADA (Americans with Disabilities Act) projects when installed with the back of the cabinet flush to the wall. A 20-watt multi-tap transformer allows for use on either 70V or 100V distributed speaker lines, while the speaker is switchable for direct 8-ohm operation with power handling of 80W continuous (320W peak, 2 hrs.) The 70 Hz to 20 kHz frequency range delivers clean, clear sound for music or speech. Versatile installation is accommodated by two included L-brackets, which can be installed on either the top and bottom panels (for horizontal pan aiming) or on the left and right side panels. Both locations allow for close-to-the-wall installation. In addition, a low-profile swivel (pan) / tilt wall bracket is also included, for adding up to 10° down-tilt to the cabinet aiming (in addition to the built-in 10° down-tilt aim when the speaker is installed flat to the wall). The COL600 has an IP54 rating (per IEC60529) for protection against ingress of dust or water. The drivers are water-treated, the grille has a water-backing, and a cover is included to protect the input terminals. Features:Two 5 x 2.25 inch racetrack woofers & one 1 inch tweeter 24 inch tall with shallow 3.7 inch cabinet depth Wide 160° horizontal and focused 110° vertical coverage 10° downward tilt to aim for covering most listening areas without requiring physical down- tilting of the cabinet 80W continuous pink noise power handling (320W peak) 70 Hz – 20 kHz frequency range Built-in 20W 70V/100V multi-tap transformer, plus 8 ohm direct input. 111 dB peak SPL (105 dB continuous), 2 hrs Tweeter near top of column for unobstructed coverage of listening space Versatile mounting brackets included – both Common Applications:The JBL COL600 slim column loudspeaker is ideal for a wide variety of applications, such as conference/meeting rooms, lecture halls, retail stores, concourses, transit spaces, fill applications, audio for video, and other applications where slim, compact design and high performance is desired. Specifications: Frequency Range (-10 dB)¹: 70 Hz – 20 kHz Frequency Response (+/-3 dB): 105 Hz – 20 kHz Power Rating (8? setting)2: 160W Continuous Program (2 hrs) 80W (320W peak) Continuous Pink Noise (2 hrs) 60W (240W peak) Continuous Pink Noise (100 hrs) Sensitivity (2.83V @ 1m): 86 dBColor: Black Coverage Pattern: Vertical 110° [1kHz-4 kHz average] 10° down-tilt to aiming access for+25°/-45° coverage in relation to physical cabinet aim Horizontal 160° [1kHz – 4 kHz average] Directivity (Q): 7.8 Directivity Index (DI): 8.9 dB Rated Maximum SPL: 105 dB Continuous (111 dB peak) @ 1m Nominal Impedance: 8? (in Thru/direct mode) Minimum Impedance: 7.0 ?@ 275 Hz Transformer Taps: 20W, 10W, 5W @ both 70V & 100V (plus 2.5W @ 70V), and 8? thru, selectable via switch Transformer Insertion Loss: Less than 1 dB for all taps Maximum Input Voltage: 21 V RMS (2 hrs), 42 V peak Recommended Protective High-Pass: 70 Hz for 8 ? operation; 60 Hz for all transformer tap settings (20W, 10W, 5W and 2.5W) Drivers: Two 125 x 55 mm (5 x 2.25 in.) racetrack LF drivers One 25 mm (1 in.) tweeter (tweeter located at top of array for better coverage of listening space) Enclosure Material: PC + ABS, UL94-V0 flammability rating Grille: Plated SPCC with polyester powder coat finish Agency Ratings: Transformer UL recognized. RoHS, REACH compliance. LVD for CE. Environmental Rating: IP-54 rated per IEC60529, dust and water protected when installed with included rain cover for input terminal compartment and no physical up-tilt cabinet aiming. UV resistant. [Cycle 1 per ISO 4892.3-2006] Terminals: 4-pin Euroblock connection for bare wire, accepts 24 to 14 AWG gauge wire (0.25 to 2.5 sq mm). Rain cover allows for one or two 2-wire cables, with max cable jacket diameter of 8 mm (0.3 in) Insert Points: Top & Bottom Caps: 1 threaded insert point on each cap (top & bottom, 2 insert points total) for L-BRACKETS; attach via included M6 x 28 mm bolts, flat washers, and lock washers. (Remove silicon caps over insert points AND remove pre-installed bolts holding end cap in place.) [Note: For installer-specified attachment to these threaded insert points (without L-bracket), threaded insert is M6 x 28 mm deep.] Side Panels: 1 threaded insert point on each side (left and right, for 2 insert points total) for L-BRACKETS; attach via included M6 x 28 mm bolts, flat washers, and lock washers. (Remove silicon caps over insert points.) [Note: For installer-specified attachment to these threaded insert points (without L-bracket), insert is M6 x 22 mm deep.] Mounting: Included Swivel (Pan) / Tilt WALL BRACKET provides continuously variable ±95° degree Horizontal left-right swivel (pan) aiming (at 0° down-tilt); continuously adjustable +0°/-10° Vertical tilt (when no interference to wall); WALL and SPEAKER sections of WALL BRACKET ASSEMBLY attach together via included M6 x 12 mm bolts, flat washers, and lock washers. Two included L-brackets that can be positioned on either top & bottom insert points or side-side insert points. Top, bottom, and 2 side threaded insert points can be interfaced by installer for installer-supplied mounting methods. Installer responsible for safety of mounting method. Dimensions (H x W x D): 598 x 102 x 93 mm (23.6 x 4.1 x 3.7 inches) Net Weight: 3.5 kg (7.8 lbs) each Shipping Weight: 4.5 kg (10.0 lbs) each (packed 1 speaker per carton) Included Accessories: Low-profile Swivel (Pan) / Tilt WALL BRACKET; 2 x L-BRACKETS that can be positioned on top/bottom or side/side insert points. Return Policy AudioSavings Return Policy: At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA. Prior to returning merchandise, contact us and we will give you a return authorization # and a return label. You may return this item for a refund within 30 DAYS of purchase. Warranty Repair/Exchange Period: 1 YEAR If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options: We will send you a pre-paid shipping label to replace the item for a brand new one. We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you. If you are returning a working item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free. Replacement/Processing Time: Your replacement or refund will process within 3-5 business days of when we receive the item. Please note items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned. You MUST notify us within 48 hours if you receive an item that was damaged during shipping. Process for returning items Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility. Item Code: JBL-COL600-BK* Home / About Us / Contact Us / Returns / FAQs Copyright © 2016 Audio Savings, All rights reserved. | eBay Template Design

Just the walnut cabinets from a pair of JBL J60T speakers. No grille covers. The grille covers are inu another auction.Thanks for bidding!

Car Audio & VideoPro AudioMarine AudioLighting Karaoke Home/Portable Audio JBL COL600-BK 24 Black 70V Commercial Slim Column Wall Mount Array Speaker --> Click Thumbnails to Enlarge Condition and Warranty Condition: OPEN BOX Warranty: 1 YEAR AUDIOSAVINGS Product Description Description: The JBL COL600 is an elegant 24-inch (600 mm) slim column loudspeaker that provides wide horizontal and narrow vertical coverage, with a built-in 10° down-tilt to the aim, providing optimum coverage for most listening areas while allowing the speaker to be installed flat to the wall. The slim, compact design—winner of international design awards for industrial design excellence—complements virtually any architectural décor. A combination of stylish design and outstanding performance features makes the COL600 ideal for a wide variety of applications, such as conference/meeting rooms, lecture halls, retail stores, concourses, transit spaces, fill applications, audio for video, and other applications where slim, compact design and high performance is desired. Two 5-inch x 2.25 inch racetrack woofers provide maximum radiating area in a column form factor. The tweeter is located at top of array for less obstructed coverage of the listening space and is aimed at a down angle, allowing down-tilted coverage aim, even with the cabinet flat to the wall. The shallow cabinet depth of 3.7 inches (93 mm) qualifies for ADA (Americans with Disabilities Act) projects when installed with the back of the cabinet flush to the wall. A 20-watt multi-tap transformer allows for use on either 70V or 100V distributed speaker lines, while the speaker is switchable for direct 8-ohm operation with power handling of 80W continuous (320W peak, 2 hrs.) The 70 Hz to 20 kHz frequency range delivers clean, clear sound for music or speech. Versatile installation is accommodated by two included L-brackets, which can be installed on either the top and bottom panels (for horizontal pan aiming) or on the left and right side panels. Both locations allow for close-to-the-wall installation. In addition, a low-profile swivel (pan) / tilt wall bracket is also included, for adding up to 10° down-tilt to the cabinet aiming (in addition to the built-in 10° down-tilt aim when the speaker is installed flat to the wall). The COL600 has an IP54 rating (per IEC60529) for protection against ingress of dust or water. The drivers are water-treated, the grille has a water-backing, and a cover is included to protect the input terminals. Features:Two 5 x 2.25 inch racetrack woofers & one 1 inch tweeter 24 inch tall with shallow 3.7 inch cabinet depth Wide 160° horizontal and focused 110° vertical coverage 10° downward tilt to aim for covering most listening areas without requiring physical down- tilting of the cabinet 80W continuous pink noise power handling (320W peak) 70 Hz – 20 kHz frequency range Built-in 20W 70V/100V multi-tap transformer, plus 8 ohm direct input. 111 dB peak SPL (105 dB continuous), 2 hrs Tweeter near top of column for unobstructed coverage of listening space Versatile mounting brackets included – both Common Applications:The JBL COL600 slim column loudspeaker is ideal for a wide variety of applications, such as conference/meeting rooms, lecture halls, retail stores, concourses, transit spaces, fill applications, audio for video, and other applications where slim, compact design and high performance is desired. Specifications: Frequency Range (-10 dB)¹: 70 Hz – 20 kHz Frequency Response (+/-3 dB): 105 Hz – 20 kHz Power Rating (8? setting)2: 160W Continuous Program (2 hrs) 80W (320W peak) Continuous Pink Noise (2 hrs) 60W (240W peak) Continuous Pink Noise (100 hrs) Sensitivity (2.83V @ 1m): 86 dBColor: Black Coverage Pattern: Vertical 110° [1kHz-4 kHz average] 10° down-tilt to aiming access for+25°/-45° coverage in relation to physical cabinet aim Horizontal 160° [1kHz – 4 kHz average] Directivity (Q): 7.8 Directivity Index (DI): 8.9 dB Rated Maximum SPL: 105 dB Continuous (111 dB peak) @ 1m Nominal Impedance: 8? (in Thru/direct mode) Minimum Impedance: 7.0 ?@ 275 Hz Transformer Taps: 20W, 10W, 5W @ both 70V & 100V (plus 2.5W @ 70V), and 8? thru, selectable via switch Transformer Insertion Loss: Less than 1 dB for all taps Maximum Input Voltage: 21 V RMS (2 hrs), 42 V peak Recommended Protective High-Pass: 70 Hz for 8 ? operation; 60 Hz for all transformer tap settings (20W, 10W, 5W and 2.5W) Drivers: Two 125 x 55 mm (5 x 2.25 in.) racetrack LF drivers One 25 mm (1 in.) tweeter (tweeter located at top of array for better coverage of listening space) Enclosure Material: PC + ABS, UL94-V0 flammability rating Grille: Plated SPCC with polyester powder coat finish Agency Ratings: Transformer UL recognized. RoHS, REACH compliance. LVD for CE. Environmental Rating: IP-54 rated per IEC60529, dust and water protected when installed with included rain cover for input terminal compartment and no physical up-tilt cabinet aiming. UV resistant. [Cycle 1 per ISO 4892.3-2006] Terminals: 4-pin Euroblock connection for bare wire, accepts 24 to 14 AWG gauge wire (0.25 to 2.5 sq mm). Rain cover allows for one or two 2-wire cables, with max cable jacket diameter of 8 mm (0.3 in) Insert Points: Top & Bottom Caps: 1 threaded insert point on each cap (top & bottom, 2 insert points total) for L-BRACKETS; attach via included M6 x 28 mm bolts, flat washers, and lock washers. (Remove silicon caps over insert points AND remove pre-installed bolts holding end cap in place.) [Note: For installer-specified attachment to these threaded insert points (without L-bracket), threaded insert is M6 x 28 mm deep.] Side Panels: 1 threaded insert point on each side (left and right, for 2 insert points total) for L-BRACKETS; attach via included M6 x 28 mm bolts, flat washers, and lock washers. (Remove silicon caps over insert points.) [Note: For installer-specified attachment to these threaded insert points (without L-bracket), insert is M6 x 22 mm deep.] Mounting: Included Swivel (Pan) / Tilt WALL BRACKET provides continuously variable ±95° degree Horizontal left-right swivel (pan) aiming (at 0° down-tilt); continuously adjustable +0°/-10° Vertical tilt (when no interference to wall); WALL and SPEAKER sections of WALL BRACKET ASSEMBLY attach together via included M6 x 12 mm bolts, flat washers, and lock washers. Two included L-brackets that can be positioned on either top & bottom insert points or side-side insert points. Top, bottom, and 2 side threaded insert points can be interfaced by installer for installer-supplied mounting methods. Installer responsible for safety of mounting method. Dimensions (H x W x D): 598 x 102 x 93 mm (23.6 x 4.1 x 3.7 inches) Net Weight: 3.5 kg (7.8 lbs) each Shipping Weight: 4.5 kg (10.0 lbs) each (packed 1 speaker per carton) Included Accessories: Low-profile Swivel (Pan) / Tilt WALL BRACKET; 2 x L-BRACKETS that can be positioned on top/bottom or side/side insert points. Return Policy AudioSavings Return Policy: At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA. Prior to returning merchandise, contact us and we will give you a return authorization # and a return label. You may return this item for a refund within 30 DAYS of purchase. Warranty Repair/Exchange Period: 1 YEAR If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options: We will send you a pre-paid shipping label to replace the item for a brand new one. We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you. If you are returning a working item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free. Replacement/Processing Time: Your replacement or refund will process within 3-5 business days of when we receive the item. Please note items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned. You MUST notify us within 48 hours if you receive an item that was damaged during shipping. Process for returning items Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility. Item Code: JBL-COL600-BK* Home / About Us / Contact Us / Returns / FAQs Copyright © 2016 Audio Savings, All rights reserved. | eBay Template Design

Just the walnut cabinets from a pair of JBL J60T speakers. No grille covers. The grille covers are inu another auction.Thanks for bidding!

Car Audio & VideoPro AudioMarine AudioLighting Karaoke Home/Portable Audio JBL COL600-BK 24 Black 70V Commercial Slim Column Wall Mount Array Speaker --> Click Thumbnails to Enlarge Condition and Warranty Condition: OPEN BOX Warranty: 1 YEAR AUDIOSAVINGS Product Description Description: The JBL COL600 is an elegant 24-inch (600 mm) slim column loudspeaker that provides wide horizontal and narrow vertical coverage, with a built-in 10° down-tilt to the aim, providing optimum coverage for most listening areas while allowing the speaker to be installed flat to the wall. The slim, compact design—winner of international design awards for industrial design excellence—complements virtually any architectural décor. A combination of stylish design and outstanding performance features makes the COL600 ideal for a wide variety of applications, such as conference/meeting rooms, lecture halls, retail stores, concourses, transit spaces, fill applications, audio for video, and other applications where slim, compact design and high performance is desired. Two 5-inch x 2.25 inch racetrack woofers provide maximum radiating area in a column form factor. The tweeter is located at top of array for less obstructed coverage of the listening space and is aimed at a down angle, allowing down-tilted coverage aim, even with the cabinet flat to the wall. The shallow cabinet depth of 3.7 inches (93 mm) qualifies for ADA (Americans with Disabilities Act) projects when installed with the back of the cabinet flush to the wall. A 20-watt multi-tap transformer allows for use on either 70V or 100V distributed speaker lines, while the speaker is switchable for direct 8-ohm operation with power handling of 80W continuous (320W peak, 2 hrs.) The 70 Hz to 20 kHz frequency range delivers clean, clear sound for music or speech. Versatile installation is accommodated by two included L-brackets, which can be installed on either the top and bottom panels (for horizontal pan aiming) or on the left and right side panels. Both locations allow for close-to-the-wall installation. In addition, a low-profile swivel (pan) / tilt wall bracket is also included, for adding up to 10° down-tilt to the cabinet aiming (in addition to the built-in 10° down-tilt aim when the speaker is installed flat to the wall). The COL600 has an IP54 rating (per IEC60529) for protection against ingress of dust or water. The drivers are water-treated, the grille has a water-backing, and a cover is included to protect the input terminals. Features:Two 5 x 2.25 inch racetrack woofers & one 1 inch tweeter 24 inch tall with shallow 3.7 inch cabinet depth Wide 160° horizontal and focused 110° vertical coverage 10° downward tilt to aim for covering most listening areas without requiring physical down- tilting of the cabinet 80W continuous pink noise power handling (320W peak) 70 Hz – 20 kHz frequency range Built-in 20W 70V/100V multi-tap transformer, plus 8 ohm direct input. 111 dB peak SPL (105 dB continuous), 2 hrs Tweeter near top of column for unobstructed coverage of listening space Versatile mounting brackets included – both Common Applications:The JBL COL600 slim column loudspeaker is ideal for a wide variety of applications, such as conference/meeting rooms, lecture halls, retail stores, concourses, transit spaces, fill applications, audio for video, and other applications where slim, compact design and high performance is desired. Specifications: Frequency Range (-10 dB)¹: 70 Hz – 20 kHz Frequency Response (+/-3 dB): 105 Hz – 20 kHz Power Rating (8? setting)2: 160W Continuous Program (2 hrs) 80W (320W peak) Continuous Pink Noise (2 hrs) 60W (240W peak) Continuous Pink Noise (100 hrs) Sensitivity (2.83V @ 1m): 86 dBColor: Black Coverage Pattern: Vertical 110° [1kHz-4 kHz average] 10° down-tilt to aiming access for+25°/-45° coverage in relation to physical cabinet aim Horizontal 160° [1kHz – 4 kHz average] Directivity (Q): 7.8 Directivity Index (DI): 8.9 dB Rated Maximum SPL: 105 dB Continuous (111 dB peak) @ 1m Nominal Impedance: 8? (in Thru/direct mode) Minimum Impedance: 7.0 ?@ 275 Hz Transformer Taps: 20W, 10W, 5W @ both 70V & 100V (plus 2.5W @ 70V), and 8? thru, selectable via switch Transformer Insertion Loss: Less than 1 dB for all taps Maximum Input Voltage: 21 V RMS (2 hrs), 42 V peak Recommended Protective High-Pass: 70 Hz for 8 ? operation; 60 Hz for all transformer tap settings (20W, 10W, 5W and 2.5W) Drivers: Two 125 x 55 mm (5 x 2.25 in.) racetrack LF drivers One 25 mm (1 in.) tweeter (tweeter located at top of array for better coverage of listening space) Enclosure Material: PC + ABS, UL94-V0 flammability rating Grille: Plated SPCC with polyester powder coat finish Agency Ratings: Transformer UL recognized. RoHS, REACH compliance. LVD for CE. Environmental Rating: IP-54 rated per IEC60529, dust and water protected when installed with included rain cover for input terminal compartment and no physical up-tilt cabinet aiming. UV resistant. [Cycle 1 per ISO 4892.3-2006] Terminals: 4-pin Euroblock connection for bare wire, accepts 24 to 14 AWG gauge wire (0.25 to 2.5 sq mm). Rain cover allows for one or two 2-wire cables, with max cable jacket diameter of 8 mm (0.3 in) Insert Points: Top & Bottom Caps: 1 threaded insert point on each cap (top & bottom, 2 insert points total) for L-BRACKETS; attach via included M6 x 28 mm bolts, flat washers, and lock washers. (Remove silicon caps over insert points AND remove pre-installed bolts holding end cap in place.) [Note: For installer-specified attachment to these threaded insert points (without L-bracket), threaded insert is M6 x 28 mm deep.] Side Panels: 1 threaded insert point on each side (left and right, for 2 insert points total) for L-BRACKETS; attach via included M6 x 28 mm bolts, flat washers, and lock washers. (Remove silicon caps over insert points.) [Note: For installer-specified attachment to these threaded insert points (without L-bracket), insert is M6 x 22 mm deep.] Mounting: Included Swivel (Pan) / Tilt WALL BRACKET provides continuously variable ±95° degree Horizontal left-right swivel (pan) aiming (at 0° down-tilt); continuously adjustable +0°/-10° Vertical tilt (when no interference to wall); WALL and SPEAKER sections of WALL BRACKET ASSEMBLY attach together via included M6 x 12 mm bolts, flat washers, and lock washers. Two included L-brackets that can be positioned on either top & bottom insert points or side-side insert points. Top, bottom, and 2 side threaded insert points can be interfaced by installer for installer-supplied mounting methods. Installer responsible for safety of mounting method. Dimensions (H x W x D): 598 x 102 x 93 mm (23.6 x 4.1 x 3.7 inches) Net Weight: 3.5 kg (7.8 lbs) each Shipping Weight: 4.5 kg (10.0 lbs) each (packed 1 speaker per carton) Included Accessories: Low-profile Swivel (Pan) / Tilt WALL BRACKET; 2 x L-BRACKETS that can be positioned on top/bottom or side/side insert points. Return Policy AudioSavings Return Policy: At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA. Prior to returning merchandise, contact us and we will give you a return authorization # and a return label. You may return this item for a refund within 30 DAYS of purchase. Warranty Repair/Exchange Period: 1 YEAR If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options: We will send you a pre-paid shipping label to replace the item for a brand new one. We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you. If you are returning a working item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free. Replacement/Processing Time: Your replacement or refund will process within 3-5 business days of when we receive the item. Please note items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned. You MUST notify us within 48 hours if you receive an item that was damaged during shipping. Process for returning items Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility. Item Code: JBL-COL600-BK* Home / About Us / Contact Us / Returns / FAQs Copyright © 2016 Audio Savings, All rights reserved. | eBay Template Design

Just the walnut cabinets from a pair of JBL J60T speakers. No grille covers. The grille covers are inu another auction.Thanks for bidding!

Car Audio & VideoPro AudioMarine AudioLighting Karaoke Home/Portable Audio JBL COL600-BK 24 Black 70V Commercial Slim Column Wall Mount Array Speaker --> Click Thumbnails to Enlarge Condition and Warranty Condition: OPEN BOX Warranty: 1 YEAR AUDIOSAVINGS Product Description Description: The JBL COL600 is an elegant 24-inch (600 mm) slim column loudspeaker that provides wide horizontal and narrow vertical coverage, with a built-in 10° down-tilt to the aim, providing optimum coverage for most listening areas while allowing the speaker to be installed flat to the wall. The slim, compact design—winner of international design awards for industrial design excellence—complements virtually any architectural décor. A combination of stylish design and outstanding performance features makes the COL600 ideal for a wide variety of applications, such as conference/meeting rooms, lecture halls, retail stores, concourses, transit spaces, fill applications, audio for video, and other applications where slim, compact design and high performance is desired. Two 5-inch x 2.25 inch racetrack woofers provide maximum radiating area in a column form factor. The tweeter is located at top of array for less obstructed coverage of the listening space and is aimed at a down angle, allowing down-tilted coverage aim, even with the cabinet flat to the wall. The shallow cabinet depth of 3.7 inches (93 mm) qualifies for ADA (Americans with Disabilities Act) projects when installed with the back of the cabinet flush to the wall. A 20-watt multi-tap transformer allows for use on either 70V or 100V distributed speaker lines, while the speaker is switchable for direct 8-ohm operation with power handling of 80W continuous (320W peak, 2 hrs.) The 70 Hz to 20 kHz frequency range delivers clean, clear sound for music or speech. Versatile installation is accommodated by two included L-brackets, which can be installed on either the top and bottom panels (for horizontal pan aiming) or on the left and right side panels. Both locations allow for close-to-the-wall installation. In addition, a low-profile swivel (pan) / tilt wall bracket is also included, for adding up to 10° down-tilt to the cabinet aiming (in addition to the built-in 10° down-tilt aim when the speaker is installed flat to the wall). The COL600 has an IP54 rating (per IEC60529) for protection against ingress of dust or water. The drivers are water-treated, the grille has a water-backing, and a cover is included to protect the input terminals. Features:Two 5 x 2.25 inch racetrack woofers & one 1 inch tweeter 24 inch tall with shallow 3.7 inch cabinet depth Wide 160° horizontal and focused 110° vertical coverage 10° downward tilt to aim for covering most listening areas without requiring physical down- tilting of the cabinet 80W continuous pink noise power handling (320W peak) 70 Hz – 20 kHz frequency range Built-in 20W 70V/100V multi-tap transformer, plus 8 ohm direct input. 111 dB peak SPL (105 dB continuous), 2 hrs Tweeter near top of column for unobstructed coverage of listening space Versatile mounting brackets included – both Common Applications:The JBL COL600 slim column loudspeaker is ideal for a wide variety of applications, such as conference/meeting rooms, lecture halls, retail stores, concourses, transit spaces, fill applications, audio for video, and other applications where slim, compact design and high performance is desired. Specifications: Frequency Range (-10 dB)¹: 70 Hz – 20 kHz Frequency Response (+/-3 dB): 105 Hz – 20 kHz Power Rating (8? setting)2: 160W Continuous Program (2 hrs) 80W (320W peak) Continuous Pink Noise (2 hrs) 60W (240W peak) Continuous Pink Noise (100 hrs) Sensitivity (2.83V @ 1m): 86 dBColor: Black Coverage Pattern: Vertical 110° [1kHz-4 kHz average] 10° down-tilt to aiming access for+25°/-45° coverage in relation to physical cabinet aim Horizontal 160° [1kHz – 4 kHz average] Directivity (Q): 7.8 Directivity Index (DI): 8.9 dB Rated Maximum SPL: 105 dB Continuous (111 dB peak) @ 1m Nominal Impedance: 8? (in Thru/direct mode) Minimum Impedance: 7.0 ?@ 275 Hz Transformer Taps: 20W, 10W, 5W @ both 70V & 100V (plus 2.5W @ 70V), and 8? thru, selectable via switch Transformer Insertion Loss: Less than 1 dB for all taps Maximum Input Voltage: 21 V RMS (2 hrs), 42 V peak Recommended Protective High-Pass: 70 Hz for 8 ? operation; 60 Hz for all transformer tap settings (20W, 10W, 5W and 2.5W) Drivers: Two 125 x 55 mm (5 x 2.25 in.) racetrack LF drivers One 25 mm (1 in.) tweeter (tweeter located at top of array for better coverage of listening space) Enclosure Material: PC + ABS, UL94-V0 flammability rating Grille: Plated SPCC with polyester powder coat finish Agency Ratings: Transformer UL recognized. RoHS, REACH compliance. LVD for CE. Environmental Rating: IP-54 rated per IEC60529, dust and water protected when installed with included rain cover for input terminal compartment and no physical up-tilt cabinet aiming. UV resistant. [Cycle 1 per ISO 4892.3-2006] Terminals: 4-pin Euroblock connection for bare wire, accepts 24 to 14 AWG gauge wire (0.25 to 2.5 sq mm). Rain cover allows for one or two 2-wire cables, with max cable jacket diameter of 8 mm (0.3 in) Insert Points: Top & Bottom Caps: 1 threaded insert point on each cap (top & bottom, 2 insert points total) for L-BRACKETS; attach via included M6 x 28 mm bolts, flat washers, and lock washers. (Remove silicon caps over insert points AND remove pre-installed bolts holding end cap in place.) [Note: For installer-specified attachment to these threaded insert points (without L-bracket), threaded insert is M6 x 28 mm deep.] Side Panels: 1 threaded insert point on each side (left and right, for 2 insert points total) for L-BRACKETS; attach via included M6 x 28 mm bolts, flat washers, and lock washers. (Remove silicon caps over insert points.) [Note: For installer-specified attachment to these threaded insert points (without L-bracket), insert is M6 x 22 mm deep.] Mounting: Included Swivel (Pan) / Tilt WALL BRACKET provides continuously variable ±95° degree Horizontal left-right swivel (pan) aiming (at 0° down-tilt); continuously adjustable +0°/-10° Vertical tilt (when no interference to wall); WALL and SPEAKER sections of WALL BRACKET ASSEMBLY attach together via included M6 x 12 mm bolts, flat washers, and lock washers. Two included L-brackets that can be positioned on either top & bottom insert points or side-side insert points. Top, bottom, and 2 side threaded insert points can be interfaced by installer for installer-supplied mounting methods. Installer responsible for safety of mounting method. Dimensions (H x W x D): 598 x 102 x 93 mm (23.6 x 4.1 x 3.7 inches) Net Weight: 3.5 kg (7.8 lbs) each Shipping Weight: 4.5 kg (10.0 lbs) each (packed 1 speaker per carton) Included Accessories: Low-profile Swivel (Pan) / Tilt WALL BRACKET; 2 x L-BRACKETS that can be positioned on top/bottom or side/side insert points. Return Policy AudioSavings Return Policy: At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA. Prior to returning merchandise, contact us and we will give you a return authorization # and a return label. You may return this item for a refund within 30 DAYS of purchase. Warranty Repair/Exchange Period: 1 YEAR If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options: We will send you a pre-paid shipping label to replace the item for a brand new one. We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you. If you are returning a working item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free. Replacement/Processing Time: Your replacement or refund will process within 3-5 business days of when we receive the item. Please note items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned. You MUST notify us within 48 hours if you receive an item that was damaged during shipping. Process for returning items Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility. Item Code: JBL-COL600-BK* Home / About Us / Contact Us / Returns / FAQs Copyright © 2016 Audio Savings, All rights reserved. | eBay Template Design

JBL speakers vintage L60T. Pair Great sound. No issues. Mid brown well loved. Upgrading. Guaranteed working order

Just the walnut cabinets from a pair of JBL J60T speakers. No grille covers. The grille covers are inu another auction.Thanks for bidding!

Original Matched Pair Tweeter JBL 035 035TI 035TIA 4312C 4412 L60 L100t.?Speaker.

Grille covers for a pair of JBL L60T speakers. Original cloth. No broken teats or frames. You wont find much better. Some pics of the cabinets included - they are in another auction. Thanks for bidding!

Just the walnut cabinets from a pair of JBL J60T speakers. No grille covers. The grille covers are inu another auction.Thanks for bidding!

GS Audio Inc. is not the owner or seller of these goods, but merely a bailee acting on behalf of the seller to facilitate the sale of the goods by holding the goods until such time as a sale is completed and the goods are shipped to the buyer. GS Audio Inc. has used its best efforts to inspect the item(s) for sale and create descriptions and furnish photographs that fairly and adequately depict the type, condition and image of the goods at the time of sale. GS Audio Inc. makes no express or implied warranties or representations regarding the condition or suitability of the goods and to the extent allowed by law, specifically disclaims any express or implied warranties, including but not limited to any warranty of merchantability or fitness for purpose. GS Audio Inc. reserves the right to cancel bids on any item due to feedback. This Listing Powered By

Grille covers for a pair of JBL L60T speakers. Original cloth. No broken teats or frames. You wont find much better. Some pics of the cabinets included - they are in another auction. Thanks for bidding!

JBL 8 Woofer Speaker 116H-1 - L60T Original. Tested and working!

Just the walnut cabinets from a pair of JBL J60T speakers. No grille covers. The grille covers are inu another auction.Thanks for bidding!

1 - 8 woofer from a vintage JBL L60T speaker. Refoamed. 2 voice coil. Cast magnesium basket. 4.9 on the ohmmeter. Looks and sounds great. Thanks for bidding!

1 - 8 woofer from a vintage JBL L60T speaker. Refoamed. 2 voice coil. Cast magnesium basket. 4.3 on the ohmmeter. Looks and sounds great. Thanks for bidding!