Pioneer hinges that will fit many vintage models.

Beschreibung Heimkino 6.1 Receiver mit kompletten Zubehör (Fernbedienung, Einmessmikrofon und Antenne). Surround Ton-Formaten wie DTS 96/24, Dolby digital EX, Dolby ProLogic IIx und vielen Anschlussmöglichkeiten: 2x optisch und 1x koaxial Digitaleingänge, einen 5.1 Chincheingang, 4x analog sowie einen Front-USB-Anschluss. Dieser Mehrkanal-Receiver hat nicht nur Decoder für Dolby Digital und DTS, sondern verarbeitet auch Pro Logic IIx. Er ist damit in der Lage, auch aus2-Kanal-Aufnahmen Raumklang zu produzieren. Mit seinen 6 x 100 Watt hat kann ist er auch für größere Räume geeignet. Technischer Zustand Voll funktionstüchtig Optischer Zustand Gut mit nur geringen Gebrauchsspuren (siehe Bilder) Zubehör mit Fernbedienung, Einmessmikrofon und Antennedie Bedienungsanleitung gibt es hier: https://www.bedienungsanleitu.ng/pioneer/vsx-516/anleitung?p=4 Technische Daten Ausgangsleistung: 6x 100 W Impedanz Ausgang: 8 Ohm 6 Kanäle Signal/Rausch-Abstand: 88/64 DB Eingänge: USB Front, 5.1-Mehrkanal, 2 x Koaxial, 1 x Optisch, 3 x Audio, 3 x Audio/Video, 2 x Composite Ausgänge: 1 x Audio, 1 AV + 1 V, 2 x Composite, 1 x Pre-Amp (Subwoofer) 30Speicherbare Stationen Dolby Digital, Dolby Digital EX, Dolby Pro Logic IIx, DTS, DTS-ES Discrete 6.1,DTS-ES Matrix 6.1, DTS NEO:6, DTS 96/24, WMA 9 Pro Surround-Betriebsarten:8 + 1 Nennausgangsleistung:100 W Frequenzgang:5 - 100000 Hz, +0/ -3 dB Direkte Auslegung Kondensatoren mit großer Kapazität Pioneer Hybrid-Verstärkung DSP-Technologie: Advanced Digital Core Engine DSP(Digitaler Signalprozessor): Freescale 180 MIPS 48-bit Processing D/A-Wandler(Mehrkanal): 192 kHz/24 Bit Radio Data System (RDS) Composite Eingang /Ausgang: 3 / 1 Digitaleingang:3 (frei zuweisbar) 1 Digital Optisch Eingang 2 Koaxial Mehrkanal-Eingang: 5.1. Lautsprecher A/B: nur A USB-Anschluss(Host, Front) MCACC Betriebsart Midnight Listening Source-Direct-Schalter Stream Direct Auto Surround Abmessungen B x H x T: 420 x 158 x 353 mm Gewicht:8,9 kg Lieferung erfolgt nicht in OVP !! Wie immer bei eBay, da es sich um einen privaten Verkauf handelt, gibt es keine Rücknahme oder Garantie. Viel Erfolg beim Bieten!

View Photos Carefully. Hinge set complete.

Removed from a working turn table. Please refer to pictures and feel free to contact us with any questions.

Pioneer PL-516 Stereo Turntable Parting Out Screws.

Pioneer PL-516 Stereo Turntable Parting Out Tonearm and More - Buyer will receive only and exactly items shown in this listing photos. Please view all listing photos. Anything not shown in this listing photos, is not included

Available is a cam wheel from a Pioneer PL-516 turntable that is in very good condition. Whats included is what is pictured.We ship internationally through eBay International Standard Delivery. When possible we will combine shipments and refund any excess shipping costs paid.

Available is a platter from a Pioneer PL-516 turntable that is in very good condition. Whats included is what is pictured.We ship internationally through eBay International Standard Delivery. When possible we will combine shipments and refund any excess shipping costs paid.

Available is a rubber foot from a Pioneer PL-516 turntable that is in very good condition. It measures 2.3 in diameter and 0.85 in height. Whats included is what is pictured.We ship internationally through eBay International Standard Delivery. When possible we will combine shipments and refund any excess shipping costs paid.

Available is a neon lamp holder from a Pioneer PL-516 turntable that is in very good condition. Whats included is what is pictured.We ship internationally through eBay International Standard Delivery. When possible we will combine shipments and refund any excess shipping costs paid.

Available is a rubber platter mat from a Pioneer PL-516 turntable that is in very good condition. This will work with most turntables needing an 11-3/16 platter mat. Whats included is what is pictured.We ship internationally through eBay International Standard Delivery. When possible we will combine shipments and refund any excess shipping costs paid.

Nice original part set of 2

Available is a spindle assembly from a Pioneer PL-516 turntable that is in very good condition. Whats included is what is pictured.We ship internationally through eBay International Standard Delivery. When possible we will combine shipments and refund any excess shipping costs paid.

Very nice serviced Pioneer PL-516 semi-automatic turntable. Made in Japan in the late 70s. In my opinion, one of the great things about this turntable is its simplicity. The only thing not working on this turntable is the clip that holds the tone arm to the tonearm holder. It is broken so when transporting you will need to tie the arm down with a twisty tie. Looks and sounds fantastic with light to a few moderate scratches on the dust cover. The wear near the speed controls, which is fairly common on these older silver turntables, is interesting in that it appears someone has covered up some of the dark wear with light silver paint. Please zoom in on pictures to see condition. Very solid unit at about 16 lb It is a two-speed belt driven unit. The 4 feet on the bottom are in good condition. Original Pioneer head shell Ortofon FF 15 Cartridge It has a new belt A new stylus Clean and lubricated the automatic mechanism(it was not very dirty) Cleaned and lubricated the spindle bearing Lubricated the speed potentiometers Very lightly lubricated the motor Great sounding turntable that holds speed perfectly. This is a vintage turntable that requires a receiver/ amplifier with a phono input. Or you can purchase a separate preamp to connect to a home theater type receiver. If you are new to turntables and playing records/ vinyl, feel free to ask any questions you have. Be glad to help you. This comes from a smoke-free home. Thank you.

PIONEER ARM REST . Aftermarket . High Quality Aluminum Bezel with a set screw . So you can adjust the tone arm . The way it should be . This is a Polished aluminum pole Bezel .So the set screw (Flat blade Screwdriver 5/64) is in the rear of the Bezel . You must pre-adjust the height . Prior to final mounting of the rest . See pictures . Once you have the desired height . Turntable Arm Rest for the500 Series . Hand Machined . Tone arm rest . Adjustable Jaw . For:PL-518 PL-518XPL-514PL-516PL-513 PL-540 Nylon locking clasp . Formed fitting Stainless steel RodPolished Aluminum Bezel. Washer and 10mm (Head) nut .Set screw German stainless steel . Works better than the original and is very strong ! Please see pics . Thanks ...

Available is a circuit board from a Pioneer PL-516 turntable that is in very good condition. Whats included is what is pictured.We ship internationally through eBay International Standard Delivery. When possible we will combine shipments and refund any excess shipping costs paid.

Available is a transformer from a Pioneer PL-516 turntable that is in very good condition. Whats included is what is pictured.We ship internationally through eBay International Standard Delivery. When possible we will combine shipments and refund any excess shipping costs paid.

Available is a speed selector and pitch control assembly from a Pioneer PL-516 turntable that is in very good condition. Whats included is what is pictured.We ship internationally through eBay International Standard Delivery. When possible we will combine shipments and refund any excess shipping costs paid.

smooth working tone armcontrols work as wellI carefully removed this part, snipping the wires at the terminalssee photos comes with the mounting screws as well

Pioneer PL 516 Turntable Record Player AS IS PARTS REPAIR. SOLD AS IS PARTS REPAIR. Overall in decent cosmetic condition as seen in photos. Will ship in 4 business days after payment received. Shipping will be 32 dollars flat rate across Canada and the continental United States. International bidders please inquire about price prior to bidding. Will combine shipping where possible. Payment must be made within 48 hours unless otherwise discussed. All packages are tracked and tracking info will be provided. Paypal only. Local pickup is available for no charge but transaction must be done in cash in person. Customs are the responsibility of the buyer. Will not cancel auction once a bid is placed.

SCREWS FOR PIONEER TURNTABLE TOP CONTROL PANEL Models: PL-518, PL-540, PL-560, PL-516PL-514, PL-512

PIONEER ARM REST . Aftermarket . High Quality Aluminum Bezel with a set screw . So you can adjust the tone arm . The way it should be . This is a Polished aluminum pole Bezel .So the set screw (Flat blade Screwdriver 5/64) is in the rear of the Bezel . You must pre-adjust the height . Prior to final mounting of the rest . See pictures . Once you have the desired height . Turntable Arm Rest for the500 Series . Hand Machined . Tone arm rest . Adjustable Jaw . For:PL-518 PL-518XPL-514PL-516PL-513 PL-540 Nylon locking clasp . Formed fitting Stainless steel RodPolished Aluminum Bezel. Washer and 10mm (Head) nut .Set screw German stainless steel . Works better than the original and is very strong ! Please see pics . Thanks ...

I have 3 original feet for pioneer turntables. They are used but still in decent shape, especially if you’re missing a couple. I ship within 1 business day of the sale.

PIONEER PL DUST COVER HINGES PL-112D 115D 117D 510 512 514 516 518 540 560.