Dynavector tonearm dv507 tone arm japan turn table record player. The is a used piece. It’s in decent shape and moves smoothly. It is missing a part or two from what I can see. Please view pics carefully. It shows quite nicely and was very expensive new.

Tone arm Dynavector DV-507 with 3 sub weights Audio Station USED From JAPAN F/SDescriptionOperation?We have checked the operation with our equipment.Output from both channelsLifter descent speed (oil replenished)Adjustment points, operation feelingHeight adjustment, etc.There is no problem in operation. ? AccessoriesMain weightSub weight x 3 (A, B, C type)PHONO cableBase fixing screws x 3Instruction manual (copy)Template (copy)ShippingFedex / DHLWe always send the item with a tracking number. So please place an order without any concern on delivery. You can always track the delivery status.Shipping is only available to the address registered in eBay. If you want us to send another address, please change your address on eBay and then place an order.Shipping is available from Monday to Friday. Weekends are not available because freight companies are closed.International Buyers - Please Note:Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.

Dynavector DV-505 Tonearm Functional w Original Box & Setting Gauge 70s Description & Condition Dynavector DV505 with original box setting gauge. There is no problem with the function as it has been used normally. There is no problem with the dampers you are concerned about. Missing items in accessories ?As shown in the photo, there is a carrying handle, but there is no blind cap to attach to the screw hole when removed. ?It seems that two head shells were standard, but there is only one. ?It seems that 3 types of sub weights were standard, but now there are 2. It can also be used in heavy classes such as SPU-G. We have confirmed that the above three items are out of stock. There may be other items that you are not aware of, so please check the photos. There is an inside force canceller. This is a used item that has passed the ages, so if you are looking for something like new, please refrain from bidding. The condition is as shown in the photo. The product is everything in the first photo (pictured with the original box). Please use NCNR. Shipping We ship using FedEx, DHL and Japan Post. Payment We usually ship within 10 business days of receiving cleared payment. . International Buyers - Please Note: Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. I do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior.

Dynavector DV-50A Moving Coil Pickup Cartridge Low Output **READ! This cartridge was a pre sales model used in a high end audio manufacters turntable lab, so no model number is on it. ***but after contacting the Dynvector USA SALES REP--He confirmed it was a low output model DV-50A . Coils tested good. VERY LOW HOURS ****output is 0.2MV , so you will need a step up device or a pre amp with a moving coil low input circuit to get proper gain. DV-50AType :Low output MC cartridgeFrequency response :20 - 50,000HzOutput voltage :0.2mV(1kHz, 5cm/sec)Channel Separation :> 25dBChannel balance :< 1dBCompliance :15x10-6 cm/dynCantilever :5 mm long straight aluminum pipeStylus tip :elliptical(0.3x0.7mil)Impedance :30 ohmsTracking force :1.5-1.8gWeight :4.5gRecommended :>100 ohmsload impedance Acurrately described, SO NO RETURNS!

Kult Tonarm Dynavector dv 505 in sehr guten Zustand. Es fehlt jedoch die Basisplatte, die man jedoch leicht anfertigen kann..

Dynavector DV-50A Moving Coil Pickup Cartridge Low Output **READ! This cartridge was a pre sales model used in a high end audio manufacters turntable lab, so no model number is on it. ***but after contacting the Dynvector USA SALES REP--He confirmed it was a low output model DV-50A . Coils tested good. VERY LOW HOURS ****output is 0.2MV , so you will need a step up device or a pre amp with a moving coil low input circuit to get proper gain. DV-50AType :Low output MC cartridgeFrequency response :20 - 50,000HzOutput voltage :0.2mV(1kHz, 5cm/sec)Channel Separation :> 25dBChannel balance :< 1dBCompliance :15x10-6 cm/dynCantilever :5 mm long straight aluminum pipeStylus tip :elliptical(0.3x0.7mil)Impedance :30 ohmsTracking force :1.5-1.8gWeight :4.5gRecommended :>100 ohmsload impedance Acurrately described, SO NO RETURNS!

Description It has been used normally and there are no functional problems. No problems with dampers of concern. Missing items in the accessories are (1) There is a carrying handle as shown in the photo, but there is no blindfold cap to be attached to the screw hole when it is removed. (2) Two headshells were standard, but only one is missing. It is possible to correspond to a heavy class such as SPU-G. We have confirmed that the above three items are missing. There may be other items that we are not aware of, but please check the photos. There is an inside force canceller. The item is all shown in the first photo (with the original box). ShippingFedEx or Japan Post Please read this before you buy the product. And please understand what we can. I only send the item to the address on eBay. International Buyers + Please Note ?Import duties, taxes, and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility.?Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. ?We do not mark merchandise values below value or mark items as gifts - the US and International government regulations prohibit such behavior. We want to express our heartfelt gratitude for visiting our product page. Your interest in our products means the world to us. We take pride in delivering top-quality items and exceptional service. Rest assured, your order will be treated with the utmost care. Our dedicated team ensures that every product is meticulously handled, expertly packaged, and promptly shipped to you. If you have any questions or need assistance, please dont hesitate to reach out to us.

Dynavector DV-505 tonearm, manufactured in 70s year. Its design is quite different with any tonearm. Perfect working condition. No technical issue. Dynamic balanced tonearm, working perfectly. Effective length is 241mm and overhang is 15mm, it can be matched with almost cartridge. Please check business term before bidding on my item /////////////////////////////// NOTE: 1. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

Dynavector DV-505 tonearm, manufactured in 70s year. Its design is quite different with any tonearm. Perfect working condition. No technical issue. Dynamic balanced tonearm, working perfectly. Effective length is 241mm and overhang is 15mm, it can be matched with almost cartridge. Please check business term before bidding on my item /////////////////////////////// NOTE: 1. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

Dynavector DV-50A Moving Coil Pickup Cartridge Low Output **READ! This cartridge was a pre sales model used in a high end audio manufacters turntable lab, so no model number is on it. ***but after contacting the Dynvector USA SALES REP--He confirmed it was a low output model DV-50A . Coils tested good. VERY LOW HOURS ****output is 0.2MV , so you will need a step up device or a pre amp with a moving coil low input circuit to get proper gain. DV-50AType :Low output MC cartridgeFrequency response :20 - 50,000HzOutput voltage :0.2mV(1kHz, 5cm/sec)Channel Separation :> 25dBChannel balance :< 1dBCompliance :15x10-6 cm/dynCantilever :5 mm long straight aluminum pipeStylus tip :elliptical(0.3x0.7mil)Impedance :30 ohmsTracking force :1.5-1.8gWeight :4.5gRecommended :>100 ohmsload impedance Acurrately described, SO NO RETURNS!

Dynavector DV-505 tonearm, manufactured in 70s year. Its design is quite different with any tonearm. Perfect working condition. No technical issue. Dynamic balanced tonearm, working perfectly. Effective length is 241mm and overhang is 15mm, it can be matched with almost cartridge. Please check business term before bidding on my item /////////////////////////////// NOTE: 1. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

Dynavector DV 507 dynamic balance type Tone Arm In Excellent Condition JPN Used Shipping??? Please select the delivery method from the following. Expedited shipping Delivery method : DHL or FedEx or Japan Post *It will arrive in 7-14 days *DHL, FedEx : With Tracking number and insurance. *Japan Post : No Tracking number and insurance. International Buyers - Please Note:??? Important duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with you countrys customs office to determine what these additional costs will be prior to bidding or buying. We wont under-value merchandise or mark the item as a gift on customs forms. Doing that is against U.S. and international laws. We will decline to large price reduction offers. Please make offers up to 20%. *Notes (Please read before purchasing.) If the buyers address in a remote location, an additional $25 is required. If the buyer cancels due to personal reasons, 4% of the selling price will be charged as a cancellation fee. Please be careful not to cancel after purchase.

Condition DescriptionWe have confirmed the operation of our equipment. ?Output from both channels ? Each adjustment point, operation feeling ?Height adjustment, etc. There is no problem in operation. Each part has been polished/cleaned. Although some dullness / scratches remain on the arm / weight There is no noticeable damage and it is in good condition with gloss/gloss. There is no big damage to the cable. Considering the age, we will judge it as a good product. ?Accessories ?Main weight ?Sub weight B (large) ?Lateral weight ?Inside force canceller weight ?PHONO cable ?Base fixing screw x 4 ?Instruction manual (copy) ?Template (copy) Please Note shipping from Japan. Policy PaymentWe can shipping only registered address on ebay. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility.ShippingI send a product by International Priority(FedEx or UPS) or EMS(Japan Post) . I will determine the required shipping company depending on the situation. I attach the tracking number. Please bid it without worrying. Shipping is only available to the address registered in eBay. Please note that any address not registered in eBay is not acceptable to ship. Shipping is available from Monday to Friday. Weekends are not available because post office is closed.Terms of SaleImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to Unconditional Return Policy Customer service and satisfaction are very important to us. I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition. All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.International BuyersImport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.

Dynavector DV505 Dynamic Balance Type Tone Arm. This unit is in good working condition (please see photos).

Dynavector DV-505 tonearm, manufactured in 70s year. Its design is quite different with any tonearm. Perfect working condition. No technical issue. Dynamic balanced tonearm, working perfectly. Effective length is 241mm and overhang is 15mm, it can be matched with almost cartridge. Please check business term before bidding on my item /////////////////////////////// NOTE: 1. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

Dynavector DV 507 MKII Bi-Axis Inertia Controlled Tonearm Lightly Used – Excellent Condition On offer is a lightly used Dynavector DV507 MKII in excellent condition.This arm is complete and is in Factory Packaging (which has some ‘scuffs’ on it). The arm is perfect. As such it is an excellent opportunity to acquire this lightly used, highly acclaimed,tonearm in Excellent Condition, at an excellent price. The Long-Awaited Debut of the Dynavector DV 507MKII Tonearm: The new MKII version of the Dynavector DV 507 tonearm has made its long-awaited debut, building on the strengths of the original DV 507 which has enjoyed the highest reputation among audiophiles world-wide since its appearance in 1984. As it is a bi-axis inertia controlled tonearm the DV 507, no matter the type of cartridge can trace the music signal grooves cut in the recording with extreme accuracy. The DV 507also provides superb tracking ability on warped recordings. Resolution and musical detailing are quite remarkable. Special Features: High precision all stainless steel bearings: The use of precision stainless steel bearings give superb dynamic sensitivity and a stabilised tracking performance without any deterioration through ageing. Non-contact electro-magnetic damper: The use of new type damper with a powerful Neodymium magnet gives better damping and ensures that any adverse effects on tracking performance are minimised. Large arm lift: A larger arm lift gives a stable lift action which maintains its performance overlong periods enabling cartridges to be raised and lowered without stress. Detachable headshell plug in connector: The use of a new type of plug-in connector ensures that good contact is maintained with the Rhodium coated headshell contact pin during long-term use. New style headshell and lead wires: The new style headshell is suitable for use with a wide variety of cartridges. It is machined from aluminium alloy and has an EIA standard connector. This allows the cartridge to be rigidly mounted and the azimuth adjustment. Pure 6N wire is used in lead wires for the headshell and internal wires of the arm. High-quality arm cable: A machined aluminium connector is used. The 5 PIN connector conforms to the DIN standard. Double balanced type shield wire and 4N OFC / 6N hybrid construction arm cable. Advantages of Bi-Axis Inertia Controlled Dynamic Balance Type Tonearm:A tone arm is required to operate in two important ways so as to ensure that the cartridge can reproduce faithfully the signal from the record groove. First, there is the need to support the cartridge so that the transfer of the cantilever motion accurately mirrors the audio signal. Secondly, it must maintain an excellent tracking ability for warped records since few records are perfectly flat. These requirements can conflict with each other. However, the bi-axis tonearm provides an effective solution to the problem. Main Features: -Electro Magnetic Damping System for accurate tracking: Arm Lift providedEasy Height AdjustmentDynamic Balance Tracking Force AdjusterDynamic Damper installed in sub arm To make the DV 507 MKII compatible with a wide variety of turntables, the overall length and height of the arm have both been reduced compared to the earlier versions.The DV505 and DV501 have enjoyed an excellent reputation in the European audio market since being awarded the Design and Engineering Award at C.E.S.Chicago in 1977,1982 and 1985. The DV507MKII has important sonic improvements as well as being easier to install and use. It includes all of the technology of our tonearm design developed since the DV505 and 501. Bi-axis inertia separation for accurate signal reproduction and superb tracking ability: Bi-axis inertia separation may sound complex but it simply refers to a tone arm having two arms which operate independently in the horizontal and vertical planes. In contrast, a conventional tonearm has only one arm which moves both horizontally and vertically. This is called a gimbal type tonearm and the inertia for both planes is the same. The DV507 bi-axis tone arm has a large inertia for horizontal movement and a very small inertia for vertical movement. We shall now explain the reasons why this is advantageous. It is well known that a cartridge generates an audio signal by the differential motion between the cantilever and the cartridge body. Consequently, if the supporting point of the cartridge (the tonearm) vibrates, the tonearm motion affects the audio signal.In these conditions, the signal, which causes the tonearm to vibrate is of low frequency and large amplitude. In the currently used 45-45 stereo record cutting procedure, low frequency signals are almost entirely recorded in a horizontal direction. This means that the low frequency signal,which can cause vibration in the tone arm, exists only as a horizontal force. The tonearm therefore must have sufficient effective mass and rigidity in the horizontal plane in order to provide a stable platform for the cartridge. On the other hand, for the mid to high frequencies, the effective mass of the tonearm should not be too large since the combined mass of the cartridge and the head shell need to be taken into account as well. In particular, where records have a warped surface, the vertical effective mass needs to be small enough to ensure a good tracking ability on such surfaces. To summarise; the tone arm should have a large effective mass and enough damping in the horizontal plane and at the same time a small effective mass in the vertical plane. These conditions are almost impossible to achieve with a tone arm of conventional design using a simple gimbal pivoting system. To solve the problem, Dynavector designed a bi-axis, inertia controlled tonearm where the shorter and lightweight vertical sub arm is placed at the end of the horizontal main arm. This is the special feature of our design. Neodymium magnet for eddy current dynamic damping: Anon-contact, electro-magnetic damping mechanism has been designed to prevent sound distortion and poor tracking performance arising from arm resonances induced by low frequencies. In this system, a curved rod attached to the rear of the arm is mounted in a magnetic field supplied by two powerful neodymium magnets. Any minute movement of the rod, due to an undamped arm resonance, causes an eddy current to be induced in the rod, which in turn interacts with the magnetic field to return the system to its rest state. As already demonstrated in our DV505 and DV501 arms, this damping system is highly reliable as there is no performance loss with extended use. Expensive Neodymium magnets are employed because of their superior properties and the thicker copper damping plate used gives a much better damping action. Dynamic Balance Tracking Force Mechanism: The tracking force is applied by a precision spiral spring device. This dynamic balance system maintains an unvarying tracking force regardless of any record warp. Tracking force is easily adjusted by turning a calibrated dial. High precision, stainless steel bearings are used in the sub arm. By having a longs pan bearing support, the dynamic sensitivity has been further improved. The vertical shaft to which the sub arm is attached has a smooth bearing action, an important factor for the arms operation and sound reproduction quality. Thus tracking ability has been significantly improved and the bearing mechanism performance enhanced. Dynamic Damper in the sub arm: Most tonearms have some frequency response irregularity in the mid-low range at about 100-150Hz. This is called multi-resonance or anti-resonance. To eliminate such unwanted resonances, a dynamic damper has been installed in the bottom of the sub arm.This solution was developed after much theoretical consideration and experimentation. Ease of handling and operation: A larger arm lift has been provided to ensure ease of operation so that cartridges can be raised and lowered without stress. The arm lift has also been improved to provide long-term stability of performance. To adjust the VTA (Vertical Tracking Angle of the stylus to the record surface) more easily, a height adjusting lever is provided. The height can be adjusted more precisely than with other systems, within a range of 0 to 7mm. The anti-skating force is set using a dial indicator. The anti-skating force can be adjusted even while playing a record. (Simplified) Installation: The overall length of theDV507MKII has been shortened and is now similar to conventional tonearms in spite of its bi-axis design. It is thus easy to install on most turntables. A fixing hole with a diameter of 29 mm is needed to install the DV507MKII on the turntable board. The distance from the centre of the fixing hole on the arm board to the centre of the turntable spindle should be 226 mm. Specifications: Type: Bi-Axis inertia controlled Dynamic and Eddy Current Damping Dynamic Balance type tone arm Overall length: 306mm. With head shell: max 326 mm Effective length: 241mm (i.e. tonearm pivot point to cartridge stylus point) Overhang: 15mm Offset angle: 21.5 degree Height: 59mm lifts up to 92mm Height adjustment range: 39mm-72mm at sub arm centre Depth: 36mm without connecting cable Optimum cartridge weight: 15-35 g, including headshell Horizontal tracking angle error: -1.1 degree - +2.2 degree , 0 degree at inner band of record, 2.2 degree at outside Tracking force adjustment range: 0-38 g by 0.2 g step Sensitivity: Horizontal: less than 50 micrograms, Vertical: less than 40 micrograms Net weight: 1,380 g Output connection: 5P connector Headshell connection: EIA standards 4 Pin connector Accessories: Low resistance (0.046 ohms/m, 54pF/m) high quality arm cable, Milled aluminium headshell weight 15.4 g. Mounting template for the arm Overhang gauge for the headshell The current SRP of this item is£6,495.00 (depending where you look!). I have set the Buy It Now price at a very realistic level for this item in this brand new condition. The sale price includes UK courier shipping. For international shipping rates please contact me for an accurate quotation. *International purchasers please note that I will not ship to: Russian Federation, Ukraine, China and Taiwan. There will be no exceptions. **Please ensure that any electrical requirements are suitable for your country /territory. Please see my other accounts feedback (the majority of which was forHifi & AV products) and buy with confidence:https://www.ebay.co.uk/fdbk/feedback_profile/step.naylo?filter=feedback_page:Allhttp://feedback.ebay.co.uk/ws/eBayISAPI.dll?ViewFeedback2&userid=tigerspice1972&ftab=AllFeedback&myworld=true&rt=nc*Note: I have been told that this 2nd link may no longer be working, apologies. I will endeavour to answer any questions within 24hours where possible. Many thanks for viewing my listing.

Item Description Condition : USED Very GoodEach part has been cleaned. Shipping Standard Shipping (Japan Post , FedEx , DHL) The package will arrive 5-14 days after shipment.Other Term Import duties, taxes, customs fees, and various charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. If the cancellation is due to the buyer, we will charge a PayPal fee. If there is a remote charge for your address, we will charge you for additional shipping. Thank you for your understanding.

Item Description Condition : USED Very GoodOutput from both channelsAdjustment points, operation feelHeight adjustment, etc.There is no problem in operation. AccessoriesMain weightSub weight x 3 (large/medium/small)Lateral weightsInside force canceller weightPHONO cableAccessory bushingsCarrying handleBase fixing screws x 4TemplateInstruction Manual × 2 (Original Japanese/English)Firing caseThe foam case shows signs of wear and tear due to age/storage. Shipping Standard Shipping (Japan Post , FedEx , DHL) The package will arrive 5-14 days after shipment.Other Term Import duties, taxes, customs fees, and various charges are not included in the item price or shipping cost. These charges are the buyers responsibility. Please check with your countrys customs office to determine what these additional costs will be prior to bidding or buying. If the cancellation is due to the buyer, we will charge a PayPal fee. If there is a remote charge for your address, we will charge you for additional shipping. Thank you for your understanding.

Template CDGSlightly scratched and dirtyBLU Description Dynavector DV-505 tone arm 3 types of sub weights/PHONO cable/firing case etc. included A mass-separated dynamic balance tonearm released around 1978.Adopts a structure with two support shafts: a main arm that only moves in the lateral direction, and a sub-arm that only moves in the vertical direction.In order to reduce horizontal resonance, an electromagnetic viscosity control mechanism is used that provides resistance using eddy currents and magnetic lines of force.There are three color variations: blue/silver/black. ?Condition: Each part has been polished/cleaned. There is no noticeable damage to the arm and it is glossy/shiny.There is no noticeable damage to accessories such as weights or cables. This is a used item that has been around for a number of years.Please note that there may be scratches/dullness/feeling due to age/use. ?OperationOperation has been confirmed using our equipment.?Output from both channels?Each adjustment point, operation feeling?Height adjustment, etc.There is no problem with operation. ?Product contentsManufacturer: DynavectorModel number: DV-505Total length: approx. 285mm (excluding shell)Effective length: 241mmOverhang: 15mm Product detailshttp://audio-heritage.jp/DYNAVECTOR/etc/dv-505.html ?Accessories?Main weight?Sub weight x 3 (large/medium/small)?Lateral weight?Inside Force Canceller Weight?PHONO cable?Accessory bush?Carrying handle?Base fixing screw x 4·template?Instruction manual x 2 (original Japanese/English)?Foam caseThe firing case shows some damage due to age/storage. Payment We accept PayPal only. Please make a payment within 3 days after send my invoice. Shipping Free shipping! We will ship by EMS?FedEx?DHL(Insured, Trackable, Including handling cost.) EMS (takes 4~7 days, includes with insurance & a tracking number). EMS (Express Mail Service) is international mailing service by Japan Post Office. We will ship your item within 2-5 business days, after your payment. We can ship ONLY to your Paypal address. About Us Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. These charges are normally collected by the delivering freight (shipping) company or when you pick the item up do not confuse them for additional shipping charges. We do not mark merchandise values below value or mark items as gifts - US and International government regulations prohibit such behavior. International Buyers - Please Note: ?Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. ?Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying. ?These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges. ?We do not mark merchandise values below value or mark items as “gifts” - US and International government regulations prohibit such behavior.

Dynavector DV-505 tonearm, manufactured in 70s year. Its design is quite different with any tonearm. Perfect working condition. No technical issue. Dynamic balanced tonearm, working perfectly. Effective length is 241mm and overhang is 15mm, it can be matched with almost cartridge. Please check business term before bidding on my item /////////////////////////////// NOTE: 1. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

Tonabnehmer Dynavector DV-50X , MC, sehr gut.

Dynavector DV-505 tonearm, manufactured in 70s year. Its design is quite different with any tonearm. Perfect working condition. No technical issue. Dynamic balanced tonearm, working perfectly. Effective length is 241mm and overhang is 15mm, it can be matched with almost cartridge. Please check business term before bidding on my item /////////////////////////////// NOTE: 1. If you want to buy item, press buy it now or make offer button if you want to offer your best price. 2. I only ship item via EMS or Fedex, I dont accept ship item via sea way. 3. Please make your payment within 3 days. 4. If you have any question about item, feel free to ask me before bidding. Generally, I dont response to question ask about what is your best price, you can press best offer button and input your best price. If there is no best offer button then item is fixed price. 5. If you want to find any item related to audio turntable, audio vintage or amplifier, and you can not see in my listing, please ask me via message, I can help you find it. 6. If you want to know about me, you can search on google with key word Otomon Laboratory //////////////////////////////

The worlds largest online retailer of pre-owned audio Product DescriptionWho we areWhat we doOur ProcessOur Policies Avid Acutus Reference Belt Drive Turntable; Dynavector DRT XV-1s; DV 507 MkII Product SKU: 48630 Voltage: 120V # of Owners: 1 Service History: None Serial Number: 5064 Age: Unknown Tobacco Exposure: No MSRP: $28600 Cosmetic Description: Good cosmetic condition with some minor visible cosmetic wear including some scratches and scuffs on the turntable legs and on the platter. The power supply unit has a couple tiny nicks on the top edge of the faceplate and a few scratches on the top surface. These blemishes are not readily visible and do not detract from the overall wonderful appearance. What is Included: Turntable, Platter, Belts, Spare Belts, Record Clamp, Tonearm, Cartridge, Cartridge alignment protractor, Counterweight, Auxiliary counterweights, Upgraded maple plinth, Tonearm cable, Power supply unit, Power cable, Dustcover Other Notes: The Acutus Reference & Co. tracked these unusually challenging grooves as if they were lullabies. - The Absolute Sound Functional Notes: Operational condition of this item is excellent, fully tested and no issues found. Shipping: Shipping within the Continental USA is $299- This includes securing to a pallet with adequate protection and shipping via FedEx Freight to a residential address anywhere in the Continental USA. This rate can be reduced by $60 if a commercial delivery address available or if item can be picked up at nearest FedEx Freight depot. FedEx Freight charges a residential delivery fee otherwise which is included in our flat rate charge. Your online source for the best value in new and used audio gear. Visit us online to Buy / Sell / Trade / Consign The Music Room is the largest online retailer of pre-owned HiFi equipment in the world. Headquartered in beautiful Boulder Colorado, The Music Room is a team of 17 strong (and growing) music lovers - all dedicated to one singular mission: delivering the very best online shopping experience in the audio industry - period. We specialize in well-cared for, previously used gear because that is what we are passionate about. We feel that there is nothing more fulfilling than creating a high-performance system on a budget with carefully selected used components, speakers and cables. Our program is safe, secure, fast, fair, hassle-free and highly effective. Visit us online to Buy / Sell / Trade / Consign Buy: Are you looking to get a fair price for your used home audio equipment without all the hassles, headaches, risks and fees? We will appraise your equipment and make you a quick, easy, fair cash offer. Just fill out our “get a quote” form on our homepage to start the process. Sell: We sell in multiple online venues with many (but not all) of our products available in our eBay store. Everything is quality-assured and backed by our best-in-class, satisfaction-guaranteed return policy. Trade: Make your budget go further with a generous trade-in allowance. Let us know what you have available, and we’ll get you the best possible trade-in allowance. We can even assist with shipping & logistics from anywhere in the USA. Just fill out our “get a quote” form on our homepage to start the process. Consign: We offer a hassle-free way for individuals and businesses to liquidate used gear. We’ll handle every step of the process from shipping to appraisals, customer service, fulfillment, and returns: Industry-low rates with no hidden fees Leverage our world-class reputation and get exposure in multiple sales venues - putting your product in front of over 570k monthly shoppers. Our program is Safe, Secure, Fast, Fair, Hassle-Free and Highly Effective. With 100% feedback ratings in every venue in which we sell, you can rest assured that we’ve got your back. Visit us online to Buy / Sell / Trade / Consign Quality Assurance: We offer 15-20 new product listings for sale daily. Each product undergoes an extremely rigorous quality-assurance and listening session by one of our qualified technicians. We understand that buying used audio equipment can be rife with uncertainty and unexpected headaches. Our quality assurance program is informed by a knowledge-base built through delivering over 30,000 used audio products to satisfied customers. We promise to deliver your product in good working order - exactly as described 100% of the time. Support: We don’t just make promises. We stand behind them - your satisfaction is guaranteed. Our support team is ready to help you with any questions you might have before and after the sale. Value: In the never-ending pursuit of high performance, it’s important to stretch your limited budget as far as possible. Used equipment sells for a fraction of new prices, and with a partner like The Music Room you can upgrade any time you like and get most of your money back. There’s simply no better way to maximize a limited audio budget. Packaging: We’ve invested thousands of dollars and countless hours into mastering our state-of-the-art packaging process. Our custom foam-in-place packaging system allows us to safely package almost any item regardless of irregular shapes or sizes. Most importantly, this system provides our customers with a re-usable shipping box which increases the resale value of the product and provides a shipping method for easy, secure returns. Be seen by over 70,000 monthly visitors. Visit us online to Buy / Sell / Trade / Consign Payment: Prompt payment is expected. Paypal is preferred but all forms of payment are accepted. Unpaid item case will be opened after 3 days if no payment received. Shipping Times: Most Domestic orders ship within 1 business day of purchase. For International orders or freight shipments, please allow 2-3 business days. In all cases, tracking information will be emailed to you at the moment the shipping label is created. If you cant find it or have other questions about shipping & logistics, please contact us. Shipping Costs: Flat rate shipping costs are applicable within the contiguous 48 States (USA). These rates are clearly posted on each product page. For an International or custom quote (including Hawaii, PR, AK) please contact us. Returns: Every purchase made on eBay carries a 30-day, satisfaction-guaranteed return policy. If youre not happy with your purchase for any reason or if youve simply changed your mind... no problem. Simply ship it back for a full refund or exchange (minus S&H costs). If you have received an item that is defective in some way, we will make it right. Let us know - we will pay for return shipping and repair the item or refund 100% of your original purchase price.

Dynavector DV-505 Bi-Axis Inertia Controlled Dynamic Balance Type Tone Arm Blue Domo Arigato! Welcome, Thank you for your visit. Description Operation confirmed with the following contents.Output from both channels. Each adjustment point, operation feeling. Height adjustment, etc. The appearance is a beautiful product without any noticeable scratches. Overview As is commonly known, a pickup cartridge generates electricity by cantilever motion relative to motion of cartridge proper. While cantilever stylus precisely traces signals recorded in groove of disk, cartridge proper receives those signals faithfully provided that it is held motionless (free of vibration). Hence, the great role of a tone arm. How should cartridge be held motionless without adverse effects on signal trackability? The DV-505 has solved this problem by adopting the unique (vertical/horizontal) Bi-axis system. The horizontally movable main arm is of sufficient weight for vibration-free operation, and the adverse effect of weight on signal trackability is nullified by use of an angular-radial compound bearing design. Conversely, the vertically movable sub-arm is made so light that it never lets the stylus jump the groove of even a disk with warp(s) previously unnegotiable. Also, the DV-505 employs a double damper method -- inertia controlled dynamic damping type plus electro-magnetic damping type -- to introduce an ideal solution to the problem of tone arm resonance in low frequency range. This has generally been neglected about audio equipment that absolutely requires a flat frequency characteristic. Specifications Type:Bi-axls inertia controlled dynamic balance type tone armTotal length:335mm (including shell)Effective length:241mmOverhang:15mmOffset angle:21.5 degreeHeight:72mm (liftable to max. 94mm)Height adjustability:37-70mm (at sub arm center)Optimum cartridge weight:0 - 23g (or up to 35g including headshell)Tracklng force adjustability:0 - 3g by 0.25g stepLateral tracking angle error: -1.1 degree to +2.2 degree(0 degree at inner band of record disk, 2.2 degree at outside)Motion sensitivity:Lateral -- less than 50 mg ,Vertical -- less than 50 mgNet weight: 1,250 gOutput connector:5P connector with low resistance cord 0.025 ohms/m, 37pF/mHead connector:EIA standards Accessories Main weightSub weights x 3 (large/medium/small)Lateral weightsInside force canceller weightPHONO cableAccessory bushingsBase fixing screws x 4TemplateInstruction Manual × 2 (Original Japanese/English)Styrofoam case (no original box) Shipping Shipping is only available to the address registered in eBay. Shipping is by FedEx or EMS. Free Shipping Returns Unconditional Return Policy Customer service and satisfaction are very important to us.I have an unconditional return policy if notified within 30 of the receipt of the item. All returned items must be the original condition.All return requests must be made within 30 days of the receipt of the item. Please contact me first for return before you ship it back to me.The postage of the returned goods is a buyer burden. International Buyers Please Note:Import duties, taxes and charges are not included in the item price or shipping charges.These charges are the buyer’s responsibility.Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.These charges are normally collected by the delivering freight (shipping) company or when you pick the item up -do not confuse them for additional shipping charges.We do not mark merchandise values below value or mark items as “gifts” -US and International government regulations prohibit such behavior. I am sorry but we can not arrange that because it is illegal in Japan.Thank you.