This amp is is really good condition. There are a few small marks pictured and the plastic end of one of binding post is slightly damaged but in no way affects operation of the post. See pic. Super clean Bryston sound. Tons of power. I will pack super well but I can get a Bryston box a the buyers expense if desired. Power cord included.

Hier biete ich einen Sonderdruck an: Here I offer a reprint: Ici, je propose une reimpression: Hier kunt u een herdruk kopen: Sonderdruck aus der Zeitschrift HiFi Test TV-Video, Ausgabe 2/2003.Darin ein Testbericht der Verstärkerkombination Bryston 25 BPS + 4B SST. Drucknummer/print number: ohne, without Sprache/language: Deutsch, German Zustand/condition: hervorragend, excellent Seitenanzahl/pages: 6 Format/size: 29,7 x 21 cm

(2) BRYSTON 4B Stereo Power Amplifiers w/ Extra Power Module and (4) High Tech Wires. A perfect set-up for bi-amping your speaker system. Included is an extra out-put power module for quick session repairs if needed, although these amps are so well made, the spare module has not been used. To complete the system are (4) high-tech speaker wires from the Monster M series and MIT. These Canadian-built Bryston 4B solid-state power amplifiers are rated at 250 watts per channel into 8-ohm loads, 400 watts per channel into 4-ohm loads, and 800 watts bridged into 8 ohms. The units are rack-mountable and run cool without internal fans, making them silent.

Tested and works great! Looks a little rough around the edges but it doesn’t effect quality. Scratched up and the cord may need replacing eventually but right now it functions perfectly

Sonics 600X (Bryston 4B) Hi-Fidelity IMAX Amplifier TESTED BUT CHANNEL A IS WEAKER AND THERE ARE ALMOST NO LOW FREQUENCIESSOLD AS-IS FOR PARTS/REPAIRNO RETURNS Sonics 600X (Bryston 4B) Overview: Sonics was the American company that supplied the audio systems for the IMAX & OMNIMAX Theaters. Their amplifiers were built by the renowned Bryston in Ontario Canada and Sonics added their front & rear panels along with input circuitry. Over the years these amps have found their way into the consumer/used market and audiophiles jump at the opportunity to own one of these legendary amplifiers. The Sonics 600X is almost identical to a Bryston 4B - they were basically rebadged with Sonics front/back plates with slightly modified circuitry for their use with IMAX systems. The Sonics 600X is a three channel power amplifier with VHF/HF/LF crossover. It is rated at 120 watts/channel RMS @ 8 Ohms and 200 watts/channel RMS @ 4 ohm. The two main channels can be bridged for 400w mono output @ 8 ohm. As a triple-mono amp, all three channels are in one chassis, and each channel has their own toroidal power transformer and power supply capacitors. The Plitron tranformers were custom-made for Bryston (82 VCT @ 2.75A, or 225 watts). The power caps for each channel consist of two 10,000µ, 63V capacitors. The rail is ± 55 V and each channel has 30.5 Joules of power supply energy storage. The back panel has a detachable grounded (three-prong) power receptacle, (1) XLR female input, XLR male looping output for LF/subwoofer, and (4) post/banana jacks for +/- on each of the two main channels. ! PLEASE READ !UNDERSTAND WHAT YOU ARE PURCHASING:This is a genuine Sonics/Bryston amp but not operating properly and being sold for parts/repair.There are NO RETURNS ON THIS ITEM Additional Info: A Bryston by any other name... https://www.audiocircle.com/index.php?topic=88518.0 Reverb.com - Sonics (Bryston) Power Amplifiers https://reverb.com/item/9701077-sonics-bryston-power-amplifier-800x-mono-500w-8-or-800w-4 Sonics amps by Bryston https://www.audiocircle.com/index.php?topic=139044.0

(2) BRYSTON 4B Stereo Power Amplifiers w/ Extra Power Module and (4) High Tech Wires. A perfect set-up for bi-amping your speaker system. Included is an extra out-put power module for quick session repairs if needed, although these amps are so well made, the spare module has not been used. To complete the system are (4) high-tech speaker wires from the Monster M series and MIT. These Canadian-built Bryston 4B solid-state power amplifiers are rated at 250 watts per channel into 8-ohm loads, 400 watts per channel into 4-ohm loads, and 800 watts bridged into 8 ohms. The units are rack-mountable and run cool without internal fans, making them silent.

Introducing the Bryston 4B power amplifier, delivering a powerful 250 watts of high-quality audio output with 2 channels. This unit is ideal for those seeking exceptional audio performance, with a brand that has established itself as a leader in the industry. The amplifier features stereo L/R RCA inputs, XLR inputs, as well as Banana Speaker Jack outputs, allowing for easy integration with a range of audio systems. The unit is in great working condition and has been well-maintained to ensure optimal performance. Excellent working condition. Fantastic amp.

Solid-state stereo power amplifier. Output power: 250W continuous into 8 ohms (24dBW), 400Wpc rms continuous into 4 ohms (23dBW); 800W continuous into 8 ohms in bridged mode (29dBW). Current delivery: 16A continuous, 48A peak, per channel. Frequency response: 1Hz100kHz, 3dB for 1W output. S/N Ratio: hum and noise, 108dB below rated output, 90dB IHF. Input sensitivity: 1.4V for 250Wpc into 8 ohms. Voltage gain: 30dB. THD+noise: 20Hz20kHz, 0.01%. IM distortion (60Hz+7kHz, 4:1, SMPTE method): less than 0.01% at rated power. Damping factor: greater than 500 at 20Hz, at 8 ohms (equivalent to an output impedance of less than 0.016 ohms). Input impedance: 50k ohms unbalanced, 30k ohms balanced. Polarity: non-inverting. Dimensions:16 3/16 (411mm) W by 7 1/8 (181mm) H by 13 (343mm) D. Weight: 40.1 lbs (20.2kg) net.

Solid-state stereo power amplifier. Output power: 250W continuous into 8 ohms (24dBW), 400Wpc rms continuous into 4 ohms (23dBW); 800W continuous into 8 ohms in bridged mode (29dBW). Current delivery: 16A continuous, 48A peak, per channel. Frequency response: 1Hz100kHz, 3dB for 1W output. S/N Ratio: hum and noise, 108dB below rated output, 90dB IHF. Input sensitivity: 1.4V for 250Wpc into 8 ohms. Voltage gain: 30dB. THD+noise: 20Hz20kHz, 0.01%. IM distortion (60Hz+7kHz, 4:1, SMPTE method): less than 0.01% at rated power. Damping factor: greater than 500 at 20Hz, at 8 ohms (equivalent to an output impedance of less than 0.016 ohms). Input impedance: 50k ohms unbalanced, 30k ohms balanced. Polarity: non-inverting. Dimensions:16 3/16 (411mm) W by 7 1/8 (181mm) H by 13 (343mm) D. Weight: 40.1 lbs (20.2kg) net.

Sonics 600X (Bryston 4B) Hi-Fidelity IMAX Amplifier GREAT CONDITIONINCREDIBLE SOUND FROM BRYSTON COMPONENTSREMOVED FROM LOCAL MUSEUM DURING RENOVATION Sonics 600X (Bryston 4B) [ Listing is for 1 amp - however we have 2 units total available ] Overview: Sonics was the American company that supplied the audio systems for the IMAX & OMNIMAX Theaters. Their amplifiers were built by the renowned Bryston in Ontario Canada and Sonics added their front & rear panels along with input circuitry. Over the years these amps have found their way into the consumer/used market and audiophiles jump at the opportunity to own one of these legendary amplifiers. The Sonics 600X is almost identical to a Bryston 4B - they were basically rebadged with Sonics front/back plates with slightly modified circuitry for their use with IMAX systems. The Sonics 600X is a three channel power amplifier with VHF/HF/LF crossover. It is rated at 120 watts/channel RMS @ 8 Ohms and 200 watts/channel RMS @ 4 ohm. The two main channels can be bridged for 400w mono output @ 8 ohm. As a triple-mono amp, all three channels are in one chassis, and each channel has their own toroidal power transformer and power supply capacitors. The Plitron tranformers were custom-made for Bryston (82 VCT @ 2.75A, or 225 watts). The power caps for each channel consist of two 10,000µ, 63V capacitors. The rail is ± 55 V and each channel has 30.5 Joules of power supply energy storage. The back panel has a detachable grounded (three-prong) power receptacle, (1) XLR female input, XLR male looping output for LF/subwoofer, and (4) post/banana jacks for +/- on each of the two main channels. Unit come with new 6x30mm 150V fast-blow fuses: UNDERSTAND WHAT YOU ARE PURCHASING:While we cannot guarantee any amp performs 100% as it did when it left Brystons manufacturing facility, each unit has been tested for power handling, clipping, and clean audio on each channel. Some audiophiles choose to send their amps to Bryston for full refurbishment (contact Mike Pickett @ Bryston for details)If you would like us to ship directly to Bryston we are happy to coordinate, provide full tracking info, and save you the additional shipping costs. If a return is authorized, the buyer will assume all return shipping costs. These things are HEAVY. Additional Info: A Bryston by any other name... https://www.audiocircle.com/index.php?topic=88518.0 Reverb.com - Sonics (Bryston) Power Amplifiers https://reverb.com/item/9701077-sonics-bryston-power-amplifier-800x-mono-500w-8-or-800w-4 Sonics amps by Bryston https://www.audiocircle.com/index.php?topic=139044.0

Hier biete ich einen Sonderdruck an: Here I offer a reprint: Ici, je propose une reimpression: Hier kunt u een herdruk kopen: Sonderdruck aus der Zeitschrift HiFi Test TV-Video, Ausgabe 2/2003.Darin ein Testbericht der Verstärkerkombination Bryston 25 BPS + 4B SST. Drucknummer/print number: ohne, without Sprache/language: Deutsch, German Zustand/condition: hervorragend, excellent Seitenanzahl/pages: 6 Format/size: 29,7 x 21 cm

(2) BRYSTON 4B Stereo Power Amplifiers w/ Extra Power Module and (4) High Tech Wires. A perfect set-up for bi-amping your speaker system. Included is an extra out-put power module for quick session repairs if needed, although these amps are so well made, the spare module has not been used. To complete the system are (4) high-tech speaker wires from the Monster M series and MIT. These Canadian-built Bryston 4B solid-state power amplifiers are rated at 250 watts per channel into 8-ohm loads, 400 watts per channel into 4-ohm loads, and 800 watts bridged into 8 ohms. The units are rack-mountable and run cool without internal fans, making them silent.

Bryston 4B, 3B, 2B, 1B magazine ad. From the October 81 issue of Audio Magazine. It is an original. In good condition. Safely packed, we do include a stiff cardboard insert, the insert and ad wrapped with saran wrap and a Please Do Not Bend sticker on the envelope to help preserve the integrity of the ad.

For your consideration is a very lightly used Bryston 4B Cubed Dual-Mono Amplifier with a 19 black trim panel and blue LED display. This exceptional two channel amplifier is in like new condition and works perfectly. It looks and sounds amazing! The unit will be shipped in the original box with the power cord, owners manual and a sales receipt from an authorized Bryston dealer. Approximately 13 years of the original 20 year warranty remains.A rarified few components in audiophile lore have become so ubiquitous that nearly every music lover once had, lusted after, or if theyre really lucky, currently owns one. One such legend is the Bryston 4B. This product has been manufactured continuously (though often refined) since 1978. Currently this venerated amplifier is on its 6th generation, and its never been better. Now rated at 300 watts per channel into 8 ohms, (and upwards of 500 into 4 ohms), this true dual-mono amplifier is powerful enough for practically any speaker, yet its priced to remain within reach. The degree of clarity, power, nuance, and outright truthfulness of this amp is stunning. If youve always wanted one, maybe now is just the right time.Features:Balanced XLR and Single ended RCA input2 Channels each with fully independent power supplies including transformers300W into 8 ohms (and up to 500 into 4 ohms) per channelThe patented Salomie circuit found in all Cubed Series amplifiersSwitchable gain (23dB or 29dB)Fully convection cooled means no noisy fansMachined and anodized aluminum enclosure and dress panelLess than 500mW standby power consumptionSoftStart microprocessor controlled startup sequence wont trip circuit breakersDC trigger for automated turn on and turn offLegendary Bryston 20 Year Warranty (13 years remaining)SPECIFICATIONS:Dimensions Inches: 17 or 19 W x 6.3 H x 15.5Weight 42 lbs | 19 kgFrequency Response: <1hz - 100khz: -3dbTHD+N (20Hz-20kHz @ Rated Power, 8?): <0.005%Power Output (per channel): 300W @ 8? | 500W @ 4?Noise: RCA: -112dBXLR: -117dBInput Impedance: Unbalanced 7.5k?Balanced 30k?+ / 6k?-This amazing amp costs $7495 new. Please contact me if you have any questions.

Bryston 4B ST solid state stereo power amplifier, 250 watts/channel into 8 ohms. This amp can be switched to bridged mode for 800 watts monophonic into 8 ohms. It has both RCA (unbalanced) and XLR (balanced) stereo inputs. The outputs are 5-way binding post terminals, which can accept standard banana plugs, spade lugs, pins, or bare wire. This Bryston amp was manufactured in 1998. It is in excellent cosmetic condition. There are no dings, scratches, or physical damage of any kind. The amp is in good working order. Specs for this amp are widely available online. There is a link on the following page to a PDF of Brystons setup guide for this amp-- https://skyfiaudio.com/products/bryston-4b-st-solid-state-stereo-amplifier-in-box-under-warranty This amp measures 17 x 14.5 x 6 and weighs 40 lbs. I will box this amp with plenty of protection from shock, movement, and abrasion. The AC line cord will be packed with it. I do not have the rack handles for this amp.

Bryston 4B ST Power Amplifier. The amplifier works great. The unit has a few minor blemishes as seen in photos but overall in great shape. Just downsizing my collection.

For your consideration is a very lightly used Bryston 4B Cubed Dual-Mono Amplifier with a 19 black trim panel and blue LED display. This exceptional two channel amplifier is in like new condition and works perfectly. It looks and sounds amazing! The unit will be shipped in the original box with the power cord, owners manual and a sales receipt from an authorized Bryston dealer. Approximately 13 years of the original 20 year warranty remains.A rarified few components in audiophile lore have become so ubiquitous that nearly every music lover once had, lusted after, or if theyre really lucky, currently owns one. One such legend is the Bryston 4B. This product has been manufactured continuously (though often refined) since 1978. Currently this venerated amplifier is on its 6th generation, and its never been better. Now rated at 300 watts per channel into 8 ohms, (and upwards of 500 into 4 ohms), this true dual-mono amplifier is powerful enough for practically any speaker, yet its priced to remain within reach. The degree of clarity, power, nuance, and outright truthfulness of this amp is stunning. If youve always wanted one, maybe now is just the right time.Features:Balanced XLR and Single ended RCA input2 Channels each with fully independent power supplies including transformers300W into 8 ohms (and up to 500 into 4 ohms) per channelThe patented Salomie circuit found in all Cubed Series amplifiersSwitchable gain (23dB or 29dB)Fully convection cooled means no noisy fansMachined and anodized aluminum enclosure and dress panelLess than 500mW standby power consumptionSoftStart microprocessor controlled startup sequence wont trip circuit breakersDC trigger for automated turn on and turn offLegendary Bryston 20 Year Warranty (13 years remaining)SPECIFICATIONS:Dimensions Inches: 17 or 19 W x 6.3 H x 15.5Weight 42 lbs | 19 kgFrequency Response: <1hz - 100khz: -3dbTHD+N (20Hz-20kHz @ Rated Power, 8?): <0.005%Power Output (per channel): 300W @ 8? | 500W @ 4?Noise: RCA: -112dBXLR: -117dBInput Impedance: Unbalanced 7.5k?Balanced 30k?+ / 6k?-This amazing unit costs $7495 new. A $58.50 handling fee is included to provide insurance for a declared value of $4500. Please contact me if you have any questions.

Bryston 4B 250 Watt 2 Channel Power Amplifier - XLR inputs - pro version Unit works great, minimal exterior wear Ships FEDEX, CONUS only. Worldwide shipping via ebay international shipping program.

When looking for an amplifier to take an input signal, amplify it to effortlessly drive even the most demanding loudspeakers without adding anything but pure power, Bryson is a name that comes to many minds. Trusted by hundreds of studios and audiophiles worldwide for delivering clean power and dependable performance for decades, you need not look any further. The newest 14B3 features both balanced and unbalanced inputs as well as a dedicated power supply for each of the dual mono channels. The newest ’3’ or cubed series features refinements of over 40 years of development in the 4B line. The balance of the legendary 20 year warranty remains. (Approx 15 years) This unit was extremely well cared for by its previous (and original) owner and is very clean and dust free. No sign of smoke, pets or kids. The face is blemish free and flawless as is the rest of the amplifier. Indistinguishable from a new unit. FEATURES -Balanced XLR and Single ended RCA input2 Channels each with fully independent power supplies including transformers600W into 8 ohms (and up to 900 into 4 ohms) per channelThe patented Salomie circuit found in all Cubed Series amplifiersSwitchable gain (23dB or 29dB)Fully convection cooled means no noisy fansMachined and anodized aluminum enclosure and dress panelLess than 500mW standby power consumptionSoftStart microprocessor controlled startup sequence won’t trip circuit breakersDC trigger for automated turn on and turn offLegendary Bryston 20 Year WarrantyBlack 19 Faceplate w/ handles AMPLIFIER SPECIFICATIONS -CLASS - Dual Mono , Class A/B OperationPOWER/CH - (8 Ohm) 600WPOWER/CH - (4 Ohm)9500WTOTAL HARMONIC DISTORTION - 0.005%FREQUENCY RESPONSE - 1Hz to 100kHzNOISE - -122dB (Balanced), -118dB (Unbalanced)DIMENSIONS - (LxWxH) 18.4 x 19 x 7.8WEIGHT: 91 Lbs IN THE BOX -Original Box and packingOriginal ManualOriginal power cord (10 AWG) CONDITION - This unit was extremely well cared for by its previous (and original) owner and is very clean and dust free. No sign of smoke, pets or kids. The face is blemish and scratch free. Unit is clean inside and out. SHIPPING - We ship worldwide with UPS, Fed-Ex and various truck freight lines. All items are packed and padded with care if the original packaging is deemed insufficient. We know how exciting it is to anticipate the arrival of new gear and we want your item to arrive in the same condition it left our facility. Current MSRP (2023) - $11,995.00

Bryston 4B 250 Watt 2 Channel Power Amplifier - RCA inputs Unit works great, minimal exterior wear Ships FEDEX, CONUS only. Worldwide shipping via ebay international shipping program.

For your consideration is a very lightly used Bryston 4B Cubed Dual-Mono Amplifier with a 19 black trim panel and blue LED display. This exceptional two channel amplifier is in like new condition and works perfectly. It looks and sounds amazing! The unit will be shipped in the original box with the power cord, owners manual and a sales receipt from an authorized Bryston dealer. Approximately 13 years of the original 20 year warranty remains.A rarified few components in audiophile lore have become so ubiquitous that nearly every music lover once had, lusted after, or if theyre really lucky, currently owns one. One such legend is the Bryston 4B. This product has been manufactured continuously (though often refined) since 1978. Currently this venerated amplifier is on its 6th generation, and its never been better. Now rated at 300 watts per channel into 8 ohms, (and upwards of 500 into 4 ohms), this true dual-mono amplifier is powerful enough for practically any speaker, yet its priced to remain within reach. The degree of clarity, power, nuance, and outright truthfulness of this amp is stunning. If youve always wanted one, maybe now is just the right time.Features:Balanced XLR and Single ended RCA input2 Channels each with fully independent power supplies including transformers300W into 8 ohms (and up to 500 into 4 ohms) per channelThe patented Salomie circuit found in all Cubed Series amplifiersSwitchable gain (23dB or 29dB)Fully convection cooled means no noisy fansMachined and anodized aluminum enclosure and dress panelLess than 500mW standby power consumptionSoftStart microprocessor controlled startup sequence wont trip circuit breakersDC trigger for automated turn on and turn offLegendary Bryston 20 Year Warranty (13 years remaining)SPECIFICATIONS:Dimensions Inches: 17 or 19 W x 6.3 H x 15.5Weight 42 lbs | 19 kgFrequency Response: <1hz - 100khz: -3dbTHD+N (20Hz-20kHz @ Rated Power, 8?): <0.005%Power Output (per channel): 300W @ 8? | 500W @ 4?Noise: RCA: -112dBXLR: -117dBInput Impedance: Unbalanced 7.5k?Balanced 30k?+ / 6k?-This amazing unit costs $7495 new. A $65.00 handling fee is included to provide insurance for a declared value of $5000. Please contact me if you have any questions.

Power Output: 250 watts/channel into 8 ohms, 400 watts/channel into 4 ohms, or 800 watts bridged mode into 8 ohms. Rated THD or IM: Less than 0.01% at 250 watts, from 20 Hz to 20 kHz. S/N: 100 dB below full output. Crosstalk: Below noise level, 20 Hz to 20 kHz at 250 watts. Slewing Rate: More than 60 V/µS; more than 120 V/uS in bridged mode. Power Bandwidth: From below 1 Hz to over 100 kHz. Damping Factor: Greater than 500 at 20 Hz, re: 8 ohms. Input Sensitivity and Impedance: 1.25 V for rated output, 50 kilohms. Dimensions: 19 in. W x 5 1/4 in. H x 15 1/2 in. D (48.3 cm x 13.3 cm x 39.4 cm). Weight: 38 lbs. (17.23 Kg)

Endstufe Bryston 4B von 1981 - Defekt - Rauchentwicklung nach dem Einschalten. Diese Auktion beinhaltet: # Bryston 4B# Robertson-Bit# 2 Adapter Klinke-Cinch# Defekter Zustand Die Endstufe wurde 2000 gebraucht erworben und im Jahre 2010 sind die Elkos fachgerecht getauscht worden. Jeweils ist die Rechnung für beide Vorgänge vorhanden. Heute nach etlichen Jahren kam es nach dem Einschalten nach einiger Zeit zu einer starken Rauchbildung im Gerät, nachdem ich den Deckel wieder montiert hatte. Zuvor sind die Fotos gemacht worden. Verkauf an Bastler oder als Ersatzteillager zu nutzen. Nur an Selbstabholer in 78234 Engen zu verkaufen!